From: Boris Brezillon <boris.brezillon@bootlin.com>
To: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
Marek Vasut <marek.vasut@gmail.com>,
linux-mtd@lists.infradead.org,
Richard Weinberger <richard@nod.at>,
Brian Norris <computersforpeace@gmail.com>
Subject: Re: [PATCH] mtd: spi-nor: hisi: Avoid generic function names
Date: Sun, 22 Apr 2018 19:20:52 +0200 [thread overview]
Message-ID: <20180422192052.2da38a9c@bbrezillon> (raw)
In-Reply-To: <20180410200106.21173-1-ezequiel@collabora.com>
On Tue, 10 Apr 2018 17:01:06 -0300
Ezequiel Garcia <ezequiel@collabora.com> wrote:
> Using generic names such as get_if_type() is frowned
> upon: it suggests a core function (which is not),
> and then it makes code navigation harder.
>
> Given drivers are often used as starting point
> to write other drivers, generic names tend to spread
> like the flu. Cure the problem.
>
> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Applied to spi-nor/next.
Thanks,
Boris
> ---
> drivers/mtd/spi-nor/hisi-sfc.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c
> index 04f9fb5cd9b6..dea7b0c4b339 100644
> --- a/drivers/mtd/spi-nor/hisi-sfc.c
> +++ b/drivers/mtd/spi-nor/hisi-sfc.c
> @@ -112,7 +112,7 @@ struct hifmc_host {
> u32 num_chip;
> };
>
> -static inline int wait_op_finish(struct hifmc_host *host)
> +static inline int hisi_spi_nor_wait_op_finish(struct hifmc_host *host)
> {
> u32 reg;
>
> @@ -120,7 +120,7 @@ static inline int wait_op_finish(struct hifmc_host *host)
> (reg & FMC_INT_OP_DONE), 0, FMC_WAIT_TIMEOUT);
> }
>
> -static int get_if_type(enum spi_nor_protocol proto)
> +static int hisi_spi_nor_get_if_type(enum spi_nor_protocol proto)
> {
> enum hifmc_iftype if_type;
>
> @@ -208,7 +208,7 @@ static int hisi_spi_nor_op_reg(struct spi_nor *nor,
> reg = FMC_OP_CMD1_EN | FMC_OP_REG_OP_START | optype;
> writel(reg, host->regbase + FMC_OP);
>
> - return wait_op_finish(host);
> + return hisi_spi_nor_wait_op_finish(host);
> }
>
> static int hisi_spi_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
> @@ -259,9 +259,9 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
>
> reg = OP_CFG_FM_CS(priv->chipselect);
> if (op_type == FMC_OP_READ)
> - if_type = get_if_type(nor->read_proto);
> + if_type = hisi_spi_nor_get_if_type(nor->read_proto);
> else
> - if_type = get_if_type(nor->write_proto);
> + if_type = hisi_spi_nor_get_if_type(nor->write_proto);
> reg |= OP_CFG_MEM_IF_TYPE(if_type);
> if (op_type == FMC_OP_READ)
> reg |= OP_CFG_DUMMY_NUM(nor->read_dummy >> 3);
> @@ -274,7 +274,7 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
> : OP_CTRL_WR_OPCODE(nor->program_opcode);
> writel(reg, host->regbase + FMC_OP_DMA);
>
> - return wait_op_finish(host);
> + return hisi_spi_nor_wait_op_finish(host);
> }
>
> static ssize_t hisi_spi_nor_read(struct spi_nor *nor, loff_t from, size_t len,
prev parent reply other threads:[~2018-04-22 17:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-10 20:01 [PATCH] mtd: spi-nor: hisi: Avoid generic function names Ezequiel Garcia
2018-04-10 20:58 ` Marek Vasut
2018-04-22 17:20 ` Boris Brezillon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180422192052.2da38a9c@bbrezillon \
--to=boris.brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=cyrille.pitchen@wedev4u.fr \
--cc=ezequiel@collabora.com \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox