From: Boris Brezillon <boris.brezillon@bootlin.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>,
linux-mtd@lists.infradead.org,
Wenyou Yang <wenyou.yang@microchip.com>,
Josh Wu <rainyfeeling@outlook.com>,
Stefan Agner <stefan@agner.ch>, Lucas Stach <dev@lynxeye.de>
Subject: Re: [PATCH v5 12/17] mtd: rawnand: tegra: convert driver to nand_scan()
Date: Wed, 25 Jul 2018 17:56:40 +0200 [thread overview]
Message-ID: <20180725175640.220b3e42@bbrezillon> (raw)
In-Reply-To: <20180725133152.30898-13-miquel.raynal@bootlin.com>
On Wed, 25 Jul 2018 15:31:47 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> Two helpers have been added to the core to do all kind of controller
> side configuration/initialization between the detection phase and the
> final NAND scan. Implement these hooks so that we can convert the driver
> to just use nand_scan() instead of the nand_scan_ident() +
> nand_scan_tail() pair.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
> ---
> drivers/mtd/nand/raw/tegra_nand.c | 162 +++++++++++++++++++++-----------------
> 1 file changed, 88 insertions(+), 74 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
> index 31c0d9ca9d23..79da1efc88d1 100644
> --- a/drivers/mtd/nand/raw/tegra_nand.c
> +++ b/drivers/mtd/nand/raw/tegra_nand.c
> @@ -906,74 +906,13 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
> bits_per_step, oobsize);
> }
>
> -static int tegra_nand_chips_init(struct device *dev,
> - struct tegra_nand_controller *ctrl)
> +static int tegra_nand_attach_chip(struct nand_chip *chip)
> {
> - struct device_node *np = dev->of_node;
> - struct device_node *np_nand;
> - int nsels, nchips = of_get_child_count(np);
> - struct tegra_nand_chip *nand;
> - struct mtd_info *mtd;
> - struct nand_chip *chip;
> + struct tegra_nand_controller *ctrl = to_tegra_ctrl(chip->controller);
> + struct tegra_nand_chip *nand = to_tegra_chip(chip);
> + struct mtd_info *mtd = nand_to_mtd(chip);
> int bits_per_step;
> int ret;
> - u32 cs;
> -
> - if (nchips != 1) {
> - dev_err(dev, "Currently only one NAND chip supported\n");
> - return -EINVAL;
> - }
> -
> - np_nand = of_get_next_child(np, NULL);
> -
> - nsels = of_property_count_elems_of_size(np_nand, "reg", sizeof(u32));
> - if (nsels != 1) {
> - dev_err(dev, "Missing/invalid reg property\n");
> - return -EINVAL;
> - }
> -
> - /* Retrieve CS id, currently only single die NAND supported */
> - ret = of_property_read_u32(np_nand, "reg", &cs);
> - if (ret) {
> - dev_err(dev, "could not retrieve reg property: %d\n", ret);
> - return ret;
> - }
> -
> - nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
> - if (!nand)
> - return -ENOMEM;
> -
> - nand->cs[0] = cs;
> -
> - nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
> -
> - if (IS_ERR(nand->wp_gpio)) {
> - ret = PTR_ERR(nand->wp_gpio);
> - dev_err(dev, "Failed to request WP GPIO: %d\n", ret);
> - return ret;
> - }
> -
> - chip = &nand->chip;
> - chip->controller = &ctrl->controller;
> -
> - mtd = nand_to_mtd(chip);
> -
> - mtd->dev.parent = dev;
> - mtd->owner = THIS_MODULE;
> -
> - nand_set_flash_node(chip, np_nand);
> -
> - if (!mtd->name)
> - mtd->name = "tegra_nand";
> -
> - chip->options = NAND_NO_SUBPAGE_WRITE | NAND_USE_BOUNCE_BUFFER;
> - chip->exec_op = tegra_nand_exec_op;
> - chip->select_chip = tegra_nand_select_chip;
> - chip->setup_data_interface = tegra_nand_setup_data_interface;
> -
> - ret = nand_scan_ident(mtd, 1, NULL);
> - if (ret)
> - return ret;
>
> if (chip->bbt_options & NAND_BBT_USE_FLASH)
> chip->bbt_options |= NAND_BBT_NO_OOB;
> @@ -982,7 +921,8 @@ static int tegra_nand_chips_init(struct device *dev,
> chip->ecc.size = 512;
> chip->ecc.steps = mtd->writesize / chip->ecc.size;
> if (chip->ecc_step_ds != 512) {
> - dev_err(dev, "Unsupported step size %d\n", chip->ecc_step_ds);
> + dev_err(ctrl->dev, "Unsupported step size %d\n",
> + chip->ecc_step_ds);
> return -EINVAL;
> }
>
> @@ -1004,14 +944,15 @@ static int tegra_nand_chips_init(struct device *dev,
> }
>
> if (chip->ecc.algo == NAND_ECC_BCH && mtd->writesize < 2048) {
> - dev_err(dev, "BCH supports 2K or 4K page size only\n");
> + dev_err(ctrl->dev, "BCH supports 2K or 4K page size only\n");
> return -EINVAL;
> }
>
> if (!chip->ecc.strength) {
> ret = tegra_nand_select_strength(chip, mtd->oobsize);
> if (ret < 0) {
> - dev_err(dev, "No valid strength found, minimum %d\n",
> + dev_err(ctrl->dev,
> + "No valid strength found, minimum %d\n",
> chip->ecc_strength_ds);
> return ret;
> }
> @@ -1039,7 +980,7 @@ static int tegra_nand_chips_init(struct device *dev,
> nand->config_ecc |= CONFIG_TVAL_8;
> break;
> default:
> - dev_err(dev, "ECC strength %d not supported\n",
> + dev_err(ctrl->dev, "ECC strength %d not supported\n",
> chip->ecc.strength);
> return -EINVAL;
> }
> @@ -1062,17 +1003,17 @@ static int tegra_nand_chips_init(struct device *dev,
> nand->bch_config |= BCH_TVAL_16;
> break;
> default:
> - dev_err(dev, "ECC strength %d not supported\n",
> + dev_err(ctrl->dev, "ECC strength %d not supported\n",
> chip->ecc.strength);
> return -EINVAL;
> }
> break;
> default:
> - dev_err(dev, "ECC algorithm not supported\n");
> + dev_err(ctrl->dev, "ECC algorithm not supported\n");
> return -EINVAL;
> }
>
> - dev_info(dev, "Using %s with strength %d per 512 byte step\n",
> + dev_info(ctrl->dev, "Using %s with strength %d per 512 byte step\n",
> chip->ecc.algo == NAND_ECC_BCH ? "BCH" : "RS",
> chip->ecc.strength);
>
> @@ -1095,7 +1036,8 @@ static int tegra_nand_chips_init(struct device *dev,
> nand->config |= CONFIG_PS_4096;
> break;
> default:
> - dev_err(dev, "Unsupported writesize %d\n", mtd->writesize);
> + dev_err(ctrl->dev, "Unsupported writesize %d\n",
> + mtd->writesize);
> return -ENODEV;
> }
>
> @@ -1106,7 +1048,78 @@ static int tegra_nand_chips_init(struct device *dev,
> nand->config |= CONFIG_TAG_BYTE_SIZE(mtd->oobsize - 1);
> writel_relaxed(nand->config, ctrl->regs + CONFIG);
>
> - ret = nand_scan_tail(mtd);
> + return 0;
> +}
> +
> +static const struct nand_controller_ops tegra_nand_controller_ops = {
> + .attach_chip = &tegra_nand_attach_chip,
> +};
> +
> +static int tegra_nand_chips_init(struct device *dev,
> + struct tegra_nand_controller *ctrl)
> +{
> + struct device_node *np = dev->of_node;
> + struct device_node *np_nand;
> + int nsels, nchips = of_get_child_count(np);
> + struct tegra_nand_chip *nand;
> + struct mtd_info *mtd;
> + struct nand_chip *chip;
> + int ret;
> + u32 cs;
> +
> + if (nchips != 1) {
> + dev_err(dev, "Currently only one NAND chip supported\n");
> + return -EINVAL;
> + }
> +
> + np_nand = of_get_next_child(np, NULL);
> +
> + nsels = of_property_count_elems_of_size(np_nand, "reg", sizeof(u32));
> + if (nsels != 1) {
> + dev_err(dev, "Missing/invalid reg property\n");
> + return -EINVAL;
> + }
> +
> + /* Retrieve CS id, currently only single die NAND supported */
> + ret = of_property_read_u32(np_nand, "reg", &cs);
> + if (ret) {
> + dev_err(dev, "could not retrieve reg property: %d\n", ret);
> + return ret;
> + }
> +
> + nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
> + if (!nand)
> + return -ENOMEM;
> +
> + nand->cs[0] = cs;
> +
> + nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
> +
> + if (IS_ERR(nand->wp_gpio)) {
> + ret = PTR_ERR(nand->wp_gpio);
> + dev_err(dev, "Failed to request WP GPIO: %d\n", ret);
> + return ret;
> + }
> +
> + chip = &nand->chip;
> + chip->controller = &ctrl->controller;
> +
> + mtd = nand_to_mtd(chip);
> +
> + mtd->dev.parent = dev;
> + mtd->owner = THIS_MODULE;
> +
> + nand_set_flash_node(chip, np_nand);
> +
> + if (!mtd->name)
> + mtd->name = "tegra_nand";
> +
> + chip->options = NAND_NO_SUBPAGE_WRITE | NAND_USE_BOUNCE_BUFFER;
> + chip->exec_op = tegra_nand_exec_op;
> + chip->select_chip = tegra_nand_select_chip;
> + chip->setup_data_interface = tegra_nand_setup_data_interface;
> +
> + ret = nand_scan(mtd, 1);
> if (ret)
> return ret;
>
> @@ -1137,6 +1150,7 @@ static int tegra_nand_probe(struct platform_device *pdev)
>
> ctrl->dev = &pdev->dev;
> nand_controller_init(&ctrl->controller);
> + ctrl->controller.ops = &tegra_nand_controller_ops;
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> ctrl->regs = devm_ioremap_resource(&pdev->dev, res);
next prev parent reply other threads:[~2018-07-25 15:57 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-25 13:31 [PATCH v5 00/17] Allow dynamic allocations during NAND chip identification phase Miquel Raynal
2018-07-25 13:31 ` [PATCH v5 01/17] mtd: rawnand: brcmnand: convert driver to nand_scan() Miquel Raynal
2018-07-25 15:22 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 02/17] mtd: rawnand: cafe: " Miquel Raynal
2018-07-25 15:34 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 03/17] mtd: rawnand: lpc32xx_mlc: " Miquel Raynal
2018-07-25 15:38 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 04/17] mtd: rawnand: omap2: " Miquel Raynal
2018-07-25 15:39 ` Boris Brezillon
2018-12-13 18:01 ` [v5,04/17] " Alexander Sverdlin
2018-12-13 18:30 ` Boris Brezillon
2018-12-13 18:37 ` Boris Brezillon
2018-12-13 19:06 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 05/17] mtd: rawnand: atmel: clarify NAND addition/removal paths Miquel Raynal
2018-07-25 15:42 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 06/17] mtd: rawnand: atmel: convert driver to nand_scan() Miquel Raynal
2018-07-25 15:43 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 07/17] mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero Miquel Raynal
2018-07-25 15:44 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 08/17] mtd: rawnand: docg4: convert driver to nand_scan() Miquel Raynal
2018-07-25 15:47 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 09/17] mtd: rawnand: jz4740: fix probe function error path Miquel Raynal
2018-07-25 15:48 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 10/17] mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls Miquel Raynal
2018-07-25 15:54 ` [PATCH v5 10/17] mtd: rawnand: jz4740: group nand_scan_{ident,tail} calls Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 11/17] mtd: rawnand: jz4740: convert driver to nand_scan() Miquel Raynal
2018-07-25 15:55 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 12/17] mtd: rawnand: tegra: " Miquel Raynal
2018-07-25 15:56 ` Boris Brezillon [this message]
2018-07-26 16:29 ` Stefan Agner
2018-07-26 18:01 ` Boris Brezillon
2018-07-27 7:13 ` Stefan Agner
2018-07-27 8:06 ` Miquel Raynal
2018-07-27 8:33 ` Stefan Agner
2018-07-25 13:31 ` [PATCH v5 13/17] mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation Miquel Raynal
2018-07-25 15:57 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 14/17] mtd: rawnand: txx9ndfmc: convert driver to nand_scan() Miquel Raynal
2018-07-25 13:31 ` [PATCH v5 15/17] mtd: rawnand: do not export nand_scan_[ident|tail]() anymore Miquel Raynal
2018-07-25 15:59 ` Boris Brezillon
2018-07-25 13:31 ` [PATCH v5 16/17] mtd: rawnand: allocate model parameter dynamically Miquel Raynal
2018-07-25 13:31 ` [PATCH v5 17/17] mtd: rawnand: allocate dynamically ONFI parameters during detection Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180725175640.220b3e42@bbrezillon \
--to=boris.brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=dev@lynxeye.de \
--cc=dwmw2@infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=rainyfeeling@outlook.com \
--cc=richard@nod.at \
--cc=stefan@agner.ch \
--cc=wenyou.yang@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox