[PATCH -next] mtd: rawnand: marvell: use resource_size

[PATCH -next] mtd: rawnand: marvell: use resource_size

[Zheng Yongjun]

Use resource_size rather than a verbose computation on
the end and start fields.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
---
 drivers/mtd/nand/raw/marvell_nand.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index f5ca2002d08e..3e01b11c87f8 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2396,7 +2396,7 @@ static int marvell_nfc_setup_interface(struct nand_chip *chip, int chipnr,
 	 * be greater than that to be sure tCCS delay is respected.
 	 */
 	nfc_tmg.tWHR = TO_CYCLES(max_t(int, sdr->tWHR_min, sdr->tCCS_min),
-				 period_ns) - 2,
+				 period_ns) - 2;
 	nfc_tmg.tRHW = TO_CYCLES(max_t(int, sdr->tRHW_min, sdr->tCCS_min),
 				 period_ns);
 
-- 
2.22.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH -next] mtd: rawnand: marvell: use resource_size

[Miquel Raynal]

Hello

Zheng Yongjun <zhengyongjun3@huawei.com> wrote on Wed, 6 Jan 2021
21:18:39 +0800:

> Use resource_size rather than a verbose computation on
> the end and start fields.

Same as your previous patch, the description does not match the change.

> 
> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
> ---
>  drivers/mtd/nand/raw/marvell_nand.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
> index f5ca2002d08e..3e01b11c87f8 100644
> --- a/drivers/mtd/nand/raw/marvell_nand.c
> +++ b/drivers/mtd/nand/raw/marvell_nand.c
> @@ -2396,7 +2396,7 @@ static int marvell_nfc_setup_interface(struct nand_chip *chip, int chipnr,
>  	 * be greater than that to be sure tCCS delay is respected.
>  	 */
>  	nfc_tmg.tWHR = TO_CYCLES(max_t(int, sdr->tWHR_min, sdr->tCCS_min),
> -				 period_ns) - 2,
> +				 period_ns) - 2;
>  	nfc_tmg.tRHW = TO_CYCLES(max_t(int, sdr->tRHW_min, sdr->tCCS_min),
>  				 period_ns);
>  




Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/