public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
* [PATCH] mtd: spinand: winbond: Add support for W25N02KW
@ 2023-10-20 11:32 haibo.chen
  2023-10-27 17:43 ` Miquel Raynal
  0 siblings, 1 reply; 2+ messages in thread
From: haibo.chen @ 2023-10-20 11:32 UTC (permalink / raw)
  To: miquel.raynal, richard, vigneshr
  Cc: haibo.chen, olivier.maignial, linux-imx, linux-mtd

From: Haibo Chen <haibo.chen@nxp.com>

Add the necessary info to support W25N02KW.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
 drivers/mtd/nand/spi/winbond.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index f507e3759301..5c759656c4f9 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -169,6 +169,15 @@ static const struct spinand_info winbond_spinand_table[] = {
 					      &update_cache_variants),
 		     0,
 		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+	SPINAND_INFO("W25N02KW",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xba, 0x22),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
 };
 
 static int winbond_spinand_init(struct spinand_device *spinand)
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2023-10-27 17:44 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-10-20 11:32 [PATCH] mtd: spinand: winbond: Add support for W25N02KW haibo.chen
2023-10-27 17:43 ` Miquel Raynal

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox