* [PATCH v1 1/5] mtd: spinand: make spinand_{read,write}_page global
2024-06-17 13:34 [PATCH v1 0/5] mtd: spinand: add OTP support Martin Kurbanov
@ 2024-06-17 13:34 ` Martin Kurbanov
2024-06-17 13:34 ` [PATCH v1 2/5] mtd: spinand: add OTP support Martin Kurbanov
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: Martin Kurbanov @ 2024-06-17 13:34 UTC (permalink / raw)
To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Mika Westerberg, Michael Walle, Mark Brown, Chia-Lin Kao,
Md Sadre Alam, Ezra Buehler, Sridharan S N, Frieder Schrempf,
Alexey Romanov
Cc: linux-kernel, linux-mtd, kernel, Martin Kurbanov
Change these functions from static to global so that to use them later
in OTP operations. Since reading OTP pages is no different from reading
pages from the main area.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
---
drivers/mtd/nand/spi/core.c | 24 ++++++++++++++++++++----
include/linux/mtd/spinand.h | 6 ++++++
2 files changed, 26 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index e0b6715e5dfed..807c24b0c7c4f 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -566,8 +566,16 @@ static int spinand_lock_block(struct spinand_device *spinand, u8 lock)
return spinand_write_reg_op(spinand, REG_BLOCK_LOCK, lock);
}
-static int spinand_read_page(struct spinand_device *spinand,
- const struct nand_page_io_req *req)
+/**
+ * spinand_read_page() - Read the page
+ * @spinand: the spinand device
+ * @req: the I/O request
+ *
+ * Return: 0 or a positive number of bitflips corrected on success.
+ * A negative error code otherwise.
+ */
+int spinand_read_page(struct spinand_device *spinand,
+ const struct nand_page_io_req *req)
{
struct nand_device *nand = spinand_to_nand(spinand);
u8 status;
@@ -597,8 +605,16 @@ static int spinand_read_page(struct spinand_device *spinand,
return nand_ecc_finish_io_req(nand, (struct nand_page_io_req *)req);
}
-static int spinand_write_page(struct spinand_device *spinand,
- const struct nand_page_io_req *req)
+/**
+ * spinand_write_page() - Write the page
+ * @spinand: the spinand device
+ * @req: the I/O request
+ *
+ * Return: 0 or a positive number of bitflips corrected on success.
+ * A negative error code otherwise.
+ */
+int spinand_write_page(struct spinand_device *spinand,
+ const struct nand_page_io_req *req)
{
struct nand_device *nand = spinand_to_nand(spinand);
u8 status;
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 5c19ead604996..555846517faf6 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -519,4 +519,10 @@ int spinand_match_and_init(struct spinand_device *spinand,
int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
int spinand_select_target(struct spinand_device *spinand, unsigned int target);
+int spinand_read_page(struct spinand_device *spinand,
+ const struct nand_page_io_req *req);
+
+int spinand_write_page(struct spinand_device *spinand,
+ const struct nand_page_io_req *req);
+
#endif /* __LINUX_MTD_SPINAND_H */
--
2.43.2
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v1 2/5] mtd: spinand: add OTP support
2024-06-17 13:34 [PATCH v1 0/5] mtd: spinand: add OTP support Martin Kurbanov
2024-06-17 13:34 ` [PATCH v1 1/5] mtd: spinand: make spinand_{read,write}_page global Martin Kurbanov
@ 2024-06-17 13:34 ` Martin Kurbanov
2024-07-17 8:36 ` Miquel Raynal
2024-06-17 13:34 ` [PATCH v1 3/5] mtd: spinand: make spinand_wait() global Martin Kurbanov
` (2 subsequent siblings)
4 siblings, 1 reply; 7+ messages in thread
From: Martin Kurbanov @ 2024-06-17 13:34 UTC (permalink / raw)
To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Mika Westerberg, Michael Walle, Mark Brown, Chia-Lin Kao,
Md Sadre Alam, Ezra Buehler, Sridharan S N, Frieder Schrempf,
Alexey Romanov
Cc: linux-kernel, linux-mtd, kernel, Martin Kurbanov
The MTD subsystem already supports accessing two OTP areas: user and
factory. User areas can be written by the user. This patch only adds
support for the user areas.
In this patch the OTP_INFO macro is provided to add parameters to
spinand_info.
To implement OTP operations, the client (flash driver) is provided with
5 callbacks: .read(), .write(), .info(), .lock(), .erase().
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
---
drivers/mtd/nand/spi/Makefile | 3 +-
drivers/mtd/nand/spi/core.c | 3 +
drivers/mtd/nand/spi/otp.c | 219 ++++++++++++++++++++++++++++++++++
include/linux/mtd/spinand.h | 56 +++++++++
4 files changed, 280 insertions(+), 1 deletion(-)
create mode 100644 drivers/mtd/nand/spi/otp.c
diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
index 19cc77288ebbc..60d2e830ffc6b 100644
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o alliancememory.o ato.o esmt.o foresee.o gigadevice.o macronix.o
+spinand-objs := core.o otp.o
+spinand-objs += alliancememory.o ato.o esmt.o foresee.o gigadevice.o macronix.o
spinand-objs += micron.o paragon.o toshiba.o winbond.o xtx.o
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 807c24b0c7c4f..2cb825edd49d0 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -1111,6 +1111,7 @@ int spinand_match_and_init(struct spinand_device *spinand,
spinand->flags = table[i].flags;
spinand->id.len = 1 + table[i].devid.len;
spinand->select_target = table[i].select_target;
+ spinand->otp = &table[i].otp;
op = spinand_select_op_variant(spinand,
info->op_variants.read_cache);
@@ -1292,6 +1293,8 @@ static int spinand_init(struct spinand_device *spinand)
mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks;
mtd->_resume = spinand_mtd_resume;
+ spinand_set_mtd_otp_ops(spinand);
+
if (nand->ecc.engine) {
ret = mtd_ooblayout_count_freebytes(mtd);
if (ret < 0)
diff --git a/drivers/mtd/nand/spi/otp.c b/drivers/mtd/nand/spi/otp.c
new file mode 100644
index 0000000000000..e1f96b1898dcb
--- /dev/null
+++ b/drivers/mtd/nand/spi/otp.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
+ *
+ * Author: Martin Kurbanov <mmkurbanov@salutedevices.com>
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/spinand.h>
+
+static size_t spinand_otp_size(struct spinand_device *spinand)
+{
+ struct nand_device *nand = spinand_to_nand(spinand);
+ size_t otp_pagesize = nanddev_page_size(nand) +
+ nanddev_per_page_oobsize(nand);
+
+ return spinand->otp->layout.npages * otp_pagesize;
+}
+
+static unsigned int spinand_otp_npages(const struct spinand_device *spinand)
+{
+ return spinand->otp->layout.npages;
+}
+
+static int spinand_otp_rw(struct spinand_device *spinand, loff_t from,
+ size_t len, u8 *buf, size_t *retlen, bool is_write)
+{
+ struct nand_device *nand = spinand_to_nand(spinand);
+ struct nand_page_io_req req = { 0 };
+ unsigned long long page;
+ size_t copied = 0;
+ size_t otp_pagesize = nanddev_page_size(nand) +
+ nanddev_per_page_oobsize(nand);
+ int ret = 0;
+
+ page = from;
+ req.dataoffs = do_div(page, otp_pagesize);
+ req.pos.page = page;
+ req.type = is_write ? NAND_PAGE_WRITE : NAND_PAGE_READ;
+ req.mode = MTD_OPS_RAW;
+ req.databuf.in = buf;
+
+ while (copied < len && req.pos.page < spinand_otp_npages(spinand)) {
+ req.datalen = min_t(unsigned int,
+ otp_pagesize - req.dataoffs,
+ len - copied);
+
+ if (is_write)
+ ret = spinand_write_page(spinand, &req);
+ else
+ ret = spinand_read_page(spinand, &req);
+
+ if (ret < 0)
+ break;
+
+ req.dataoffs = 0;
+ copied += req.datalen;
+ req.pos.page++;
+ }
+
+ *retlen = copied;
+
+ return ret;
+}
+
+/**
+ * spinand_otp_read() - Read from OTP area
+ * @spinand: the spinand device
+ * @from: the offset to read
+ * @len: the number of data bytes to read
+ * @buf: the buffer to store the read data
+ * @retlen: the pointer to variable to store the number of read bytes
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+int spinand_otp_read(struct spinand_device *spinand, loff_t from, size_t len,
+ u8 *buf, size_t *retlen)
+{
+ return spinand_otp_rw(spinand, from, len, buf, retlen, false);
+}
+
+/**
+ * spinand_otp_write() - Write to OTP area
+ * @spinand: the spinand device
+ * @from: the offset to write to
+ * @len: the number of bytes to write
+ * @buf: the buffer with data to write
+ * @retlen: the pointer to variable to store the number of written bytes
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+int spinand_otp_write(struct spinand_device *spinand, loff_t from, size_t len,
+ const u8 *buf, size_t *retlen)
+{
+ return spinand_otp_rw(spinand, from, len, (u8 *)buf, retlen, true);
+}
+
+static int spinand_mtd_otp_info(struct mtd_info *mtd, size_t len,
+ size_t *retlen, struct otp_info *buf)
+{
+ struct spinand_device *spinand = mtd_to_spinand(mtd);
+ const struct spinand_otp_ops *ops = spinand->otp->ops;
+ int ret;
+
+ mutex_lock(&spinand->lock);
+ ret = ops->info(spinand, len, buf, retlen);
+ mutex_unlock(&spinand->lock);
+
+ return ret;
+}
+
+static int spinand_mtd_otp_rw(struct mtd_info *mtd, loff_t ofs, size_t len,
+ size_t *retlen, u8 *buf, bool is_write)
+{
+ struct spinand_device *spinand = mtd_to_spinand(mtd);
+ const struct spinand_otp_ops *ops = spinand->otp->ops;
+ size_t total_len = len;
+ int ret;
+
+ if (ofs < 0 || ofs + len > spinand_otp_size(spinand))
+ return -EINVAL;
+
+ total_len = min_t(size_t, total_len, spinand_otp_size(spinand) - ofs);
+ if (!total_len)
+ return 0;
+
+ mutex_lock(&spinand->lock);
+
+ ret = spinand_upd_cfg(spinand, CFG_OTP_ENABLE, CFG_OTP_ENABLE);
+ if (ret)
+ goto out_unlock;
+
+ if (is_write)
+ ret = ops->write(spinand, ofs, len, buf, retlen);
+ else
+ ret = ops->read(spinand, ofs, len, buf, retlen);
+
+ if (spinand_upd_cfg(spinand, CFG_OTP_ENABLE, 0)) {
+ WARN(1, "Can not disable OTP mode\n");
+ ret = -EIO;
+ }
+
+out_unlock:
+ mutex_unlock(&spinand->lock);
+ return ret;
+}
+
+static int spinand_mtd_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u8 *buf)
+{
+ return spinand_mtd_otp_rw(mtd, from, len, retlen, buf, false);
+}
+
+static int spinand_mtd_otp_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u8 *buf)
+{
+ return spinand_mtd_otp_rw(mtd, to, len, retlen, (u8 *)buf, true);
+}
+
+static int spinand_mtd_otp_erase(struct mtd_info *mtd, loff_t from, size_t len)
+{
+ struct spinand_device *spinand = mtd_to_spinand(mtd);
+ const struct spinand_otp_ops *ops = spinand->otp->ops;
+ int ret;
+
+ if (!ops->erase)
+ return -EOPNOTSUPP;
+
+ if (!len)
+ return 0;
+
+ if (from < 0 || (from + len) > spinand_otp_size(spinand))
+ return -EINVAL;
+
+ mutex_lock(&spinand->lock);
+ ret = ops->erase(spinand, from, len);
+ mutex_unlock(&spinand->lock);
+
+ return ret;
+}
+
+static int spinand_mtd_otp_lock(struct mtd_info *mtd, loff_t from, size_t len)
+{
+ struct spinand_device *spinand = mtd_to_spinand(mtd);
+ const struct spinand_otp_ops *ops = spinand->otp->ops;
+ int ret;
+
+ if (!ops->lock)
+ return -EOPNOTSUPP;
+
+ if (from < 0 || (from + len) > spinand_otp_size(spinand))
+ return -EINVAL;
+
+ mutex_lock(&spinand->lock);
+ ret = ops->lock(spinand, from, len);
+ mutex_unlock(&spinand->lock);
+
+ return ret;
+}
+
+/**
+ * spinand_set_mtd_otp_ops() - Set up OTP methods
+ * @spinand: the spinand device
+ *
+ * Set up OTP methods.
+ */
+void spinand_set_mtd_otp_ops(struct spinand_device *spinand)
+{
+ struct mtd_info *mtd = spinand_to_mtd(spinand);
+
+ if (!spinand->otp->ops)
+ return;
+
+ mtd->_get_user_prot_info = spinand_mtd_otp_info;
+ mtd->_read_user_prot_reg = spinand_mtd_otp_read;
+ mtd->_write_user_prot_reg = spinand_mtd_otp_write;
+ mtd->_lock_user_prot_reg = spinand_mtd_otp_lock;
+ mtd->_erase_user_prot_reg = spinand_mtd_otp_erase;
+}
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 555846517faf6..a0d42a9be333f 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -322,6 +322,43 @@ struct spinand_ondie_ecc_conf {
u8 status;
};
+/**
+ * struct spinand_otp_layout - structure to describe the SPI NAND OTP area
+ * @npages: number of pages in the OTP
+ */
+struct spinand_otp_layout {
+ unsigned int npages;
+};
+
+/**
+ * struct spinand_otp_ops - SPI NAND OTP methods
+ * @info: Get the OTP area information
+ * @lock: lock an OTP region
+ * @erase: erase an OTP region
+ * @read: read from the SPI NAND OTP area
+ * @write: write to the SPI NAND OTP area
+ */
+struct spinand_otp_ops {
+ int (*info)(struct spinand_device *spinand, size_t len,
+ struct otp_info *buf, size_t *retlen);
+ int (*lock)(struct spinand_device *spinand, loff_t from, size_t len);
+ int (*erase)(struct spinand_device *spinand, loff_t from, size_t len);
+ int (*read)(struct spinand_device *spinand, loff_t from, size_t len,
+ u8 *buf, size_t *retlen);
+ int (*write)(struct spinand_device *spinand, loff_t from, size_t len,
+ const u8 *buf, size_t *retlen);
+};
+
+/**
+ * struct spinand_otp - SPI NAND OTP grouping structure
+ * @layout: OTP region layout
+ * @ops: OTP access ops
+ */
+struct spinand_otp {
+ const struct spinand_otp_layout layout;
+ const struct spinand_otp_ops *ops;
+};
+
/**
* struct spinand_info - Structure used to describe SPI NAND chips
* @model: model name
@@ -354,6 +391,7 @@ struct spinand_info {
} op_variants;
int (*select_target)(struct spinand_device *spinand,
unsigned int target);
+ struct spinand_otp otp;
};
#define SPINAND_ID(__method, ...) \
@@ -379,6 +417,14 @@ struct spinand_info {
#define SPINAND_SELECT_TARGET(__func) \
.select_target = __func,
+#define SPINAND_OTP_INFO(__npages, __ops) \
+ .otp = { \
+ .layout = { \
+ .npages = __npages, \
+ }, \
+ .ops = __ops, \
+ }
+
#define SPINAND_INFO(__model, __id, __memorg, __eccreq, __op_variants, \
__flags, ...) \
{ \
@@ -422,6 +468,7 @@ struct spinand_dirmap {
* passed in spi_mem_op be DMA-able, so we can't based the bufs on
* the stack
* @manufacturer: SPI NAND manufacturer information
+ * @otp: SPI NAND OTP info.
* @priv: manufacturer private data
*/
struct spinand_device {
@@ -450,6 +497,7 @@ struct spinand_device {
u8 *oobbuf;
u8 *scratchbuf;
const struct spinand_manufacturer *manufacturer;
+ const struct spinand_otp *otp;
void *priv;
};
@@ -525,4 +573,12 @@ int spinand_read_page(struct spinand_device *spinand,
int spinand_write_page(struct spinand_device *spinand,
const struct nand_page_io_req *req);
+void spinand_set_mtd_otp_ops(struct spinand_device *spinand);
+
+int spinand_otp_read(struct spinand_device *spinand, loff_t from, size_t len,
+ u8 *buf, size_t *retlen);
+
+int spinand_otp_write(struct spinand_device *spinand, loff_t from, size_t len,
+ const u8 *buf, size_t *retlen);
+
#endif /* __LINUX_MTD_SPINAND_H */
--
2.43.2
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v1 2/5] mtd: spinand: add OTP support
2024-06-17 13:34 ` [PATCH v1 2/5] mtd: spinand: add OTP support Martin Kurbanov
@ 2024-07-17 8:36 ` Miquel Raynal
0 siblings, 0 replies; 7+ messages in thread
From: Miquel Raynal @ 2024-07-17 8:36 UTC (permalink / raw)
To: Martin Kurbanov
Cc: Richard Weinberger, Vignesh Raghavendra, Mika Westerberg,
Michael Walle, Mark Brown, Chia-Lin Kao, Md Sadre Alam,
Ezra Buehler, Sridharan S N, Frieder Schrempf, Alexey Romanov,
linux-kernel, linux-mtd, kernel
Hi Martin,
mmkurbanov@salutedevices.com wrote on Mon, 17 Jun 2024 16:34:54 +0300:
> The MTD subsystem already supports accessing two OTP areas: user and
> factory. User areas can be written by the user. This patch only adds
> support for the user areas.
>
> In this patch the OTP_INFO macro is provided to add parameters to
> spinand_info.
> To implement OTP operations, the client (flash driver) is provided with
> 5 callbacks: .read(), .write(), .info(), .lock(), .erase().
Good job! Please find minor comments below.
>
> Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
> ---
> drivers/mtd/nand/spi/Makefile | 3 +-
> drivers/mtd/nand/spi/core.c | 3 +
> drivers/mtd/nand/spi/otp.c | 219 ++++++++++++++++++++++++++++++++++
> include/linux/mtd/spinand.h | 56 +++++++++
> 4 files changed, 280 insertions(+), 1 deletion(-)
> create mode 100644 drivers/mtd/nand/spi/otp.c
>
> diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile
> index 19cc77288ebbc..60d2e830ffc6b 100644
> --- a/drivers/mtd/nand/spi/Makefile
> +++ b/drivers/mtd/nand/spi/Makefile
> @@ -1,4 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
> -spinand-objs := core.o alliancememory.o ato.o esmt.o foresee.o gigadevice.o macronix.o
> +spinand-objs := core.o otp.o
> +spinand-objs += alliancememory.o ato.o esmt.o foresee.o gigadevice.o macronix.o
> spinand-objs += micron.o paragon.o toshiba.o winbond.o xtx.o
> obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
> index 807c24b0c7c4f..2cb825edd49d0 100644
> --- a/drivers/mtd/nand/spi/core.c
> +++ b/drivers/mtd/nand/spi/core.c
> @@ -1111,6 +1111,7 @@ int spinand_match_and_init(struct spinand_device *spinand,
> spinand->flags = table[i].flags;
> spinand->id.len = 1 + table[i].devid.len;
> spinand->select_target = table[i].select_target;
> + spinand->otp = &table[i].otp;
>
> op = spinand_select_op_variant(spinand,
> info->op_variants.read_cache);
> @@ -1292,6 +1293,8 @@ static int spinand_init(struct spinand_device *spinand)
> mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks;
> mtd->_resume = spinand_mtd_resume;
>
> + spinand_set_mtd_otp_ops(spinand);
> +
> if (nand->ecc.engine) {
> ret = mtd_ooblayout_count_freebytes(mtd);
> if (ret < 0)
> diff --git a/drivers/mtd/nand/spi/otp.c b/drivers/mtd/nand/spi/otp.c
> new file mode 100644
> index 0000000000000..e1f96b1898dcb
> --- /dev/null
> +++ b/drivers/mtd/nand/spi/otp.c
> @@ -0,0 +1,219 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
> + *
> + * Author: Martin Kurbanov <mmkurbanov@salutedevices.com>
> + */
> +
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/spinand.h>
> +
> +static size_t spinand_otp_size(struct spinand_device *spinand)
> +{
> + struct nand_device *nand = spinand_to_nand(spinand);
> + size_t otp_pagesize = nanddev_page_size(nand) +
> + nanddev_per_page_oobsize(nand);
> +
> + return spinand->otp->layout.npages * otp_pagesize;
> +}
> +
> +static unsigned int spinand_otp_npages(const struct spinand_device *spinand)
> +{
> + return spinand->otp->layout.npages;
Maybe you can move this helper up and use it in spinand_otp_size().
> +}
> +
...
> +static int spinand_mtd_otp_rw(struct mtd_info *mtd, loff_t ofs, size_t len,
> + size_t *retlen, u8 *buf, bool is_write)
> +{
> + struct spinand_device *spinand = mtd_to_spinand(mtd);
> + const struct spinand_otp_ops *ops = spinand->otp->ops;
> + size_t total_len = len;
> + int ret;
> +
> + if (ofs < 0 || ofs + len > spinand_otp_size(spinand))
> + return -EINVAL;
> +
Please just check if (!len) here
> + total_len = min_t(size_t, total_len, spinand_otp_size(spinand) - ofs);
len ^^^
Here you can just compute the minimum and don't check the output. It
will be simpler to understand.
> + if (!total_len)
> + return 0;
> +
> + mutex_lock(&spinand->lock);
> +
> + ret = spinand_upd_cfg(spinand, CFG_OTP_ENABLE, CFG_OTP_ENABLE);
> + if (ret)
> + goto out_unlock;
> +
> + if (is_write)
> + ret = ops->write(spinand, ofs, len, buf, retlen);
> + else
> + ret = ops->read(spinand, ofs, len, buf, retlen);
> +
> + if (spinand_upd_cfg(spinand, CFG_OTP_ENABLE, 0)) {
> + WARN(1, "Can not disable OTP mode\n");
Please avoid WARN() statements like that. A normal pr_warn is enough.
> + ret = -EIO;
> + }
> +
> +out_unlock:
> + mutex_unlock(&spinand->lock);
> + return ret;
> +}
> +
> +static int spinand_mtd_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
Can you keep the naming consistent? ofs vs. from ^
> + size_t *retlen, u8 *buf)
> +{
> + return spinand_mtd_otp_rw(mtd, from, len, retlen, buf, false);
> +}
> +
> +static int spinand_mtd_otp_write(struct mtd_info *mtd, loff_t to, size_t len,
> + size_t *retlen, const u8 *buf)
> +{
> + return spinand_mtd_otp_rw(mtd, to, len, retlen, (u8 *)buf, true);
> +}
> +
> +static int spinand_mtd_otp_erase(struct mtd_info *mtd, loff_t from, size_t len)
> +{
> + struct spinand_device *spinand = mtd_to_spinand(mtd);
> + const struct spinand_otp_ops *ops = spinand->otp->ops;
> + int ret;
> +
> + if (!ops->erase)
> + return -EOPNOTSUPP;
> +
> + if (!len)
> + return 0;
This check seems sensible but is absent in the other helpers. Any
reason? Please add it to _lock() and _rw()
> +
> + if (from < 0 || (from + len) > spinand_otp_size(spinand))
> + return -EINVAL;
And this is also repeated three times, it is probably worth factorizing
out.
> +
> + mutex_lock(&spinand->lock);
> + ret = ops->erase(spinand, from, len);
> + mutex_unlock(&spinand->lock);
> +
> + return ret;
> +}
> +
> +static int spinand_mtd_otp_lock(struct mtd_info *mtd, loff_t from, size_t len)
> +{
> + struct spinand_device *spinand = mtd_to_spinand(mtd);
> + const struct spinand_otp_ops *ops = spinand->otp->ops;
> + int ret;
> +
> + if (!ops->lock)
> + return -EOPNOTSUPP;
> +
> + if (from < 0 || (from + len) > spinand_otp_size(spinand))
> + return -EINVAL;
> +
> + mutex_lock(&spinand->lock);
> + ret = ops->lock(spinand, from, len);
> + mutex_unlock(&spinand->lock);
> +
> + return ret;
> +}
> +
> +/**
> + * spinand_set_mtd_otp_ops() - Set up OTP methods
> + * @spinand: the spinand device
> + *
> + * Set up OTP methods.
> + */
> +void spinand_set_mtd_otp_ops(struct spinand_device *spinand)
> +{
> + struct mtd_info *mtd = spinand_to_mtd(spinand);
> +
> + if (!spinand->otp->ops)
> + return;
> +
> + mtd->_get_user_prot_info = spinand_mtd_otp_info;
> + mtd->_read_user_prot_reg = spinand_mtd_otp_read;
> + mtd->_write_user_prot_reg = spinand_mtd_otp_write;
> + mtd->_lock_user_prot_reg = spinand_mtd_otp_lock;
> + mtd->_erase_user_prot_reg = spinand_mtd_otp_erase;
> +}
> diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
> index 555846517faf6..a0d42a9be333f 100644
> --- a/include/linux/mtd/spinand.h
> +++ b/include/linux/mtd/spinand.h
> @@ -322,6 +322,43 @@ struct spinand_ondie_ecc_conf {
> u8 status;
> };
>
> +/**
> + * struct spinand_otp_layout - structure to describe the SPI NAND OTP area
> + * @npages: number of pages in the OTP
> + */
> +struct spinand_otp_layout {
> + unsigned int npages;
> +};
> +
> +/**
> + * struct spinand_otp_ops - SPI NAND OTP methods
> + * @info: Get the OTP area information
> + * @lock: lock an OTP region
> + * @erase: erase an OTP region
> + * @read: read from the SPI NAND OTP area
> + * @write: write to the SPI NAND OTP area
> + */
> +struct spinand_otp_ops {
> + int (*info)(struct spinand_device *spinand, size_t len,
> + struct otp_info *buf, size_t *retlen);
> + int (*lock)(struct spinand_device *spinand, loff_t from, size_t len);
> + int (*erase)(struct spinand_device *spinand, loff_t from, size_t len);
> + int (*read)(struct spinand_device *spinand, loff_t from, size_t len,
> + u8 *buf, size_t *retlen);
> + int (*write)(struct spinand_device *spinand, loff_t from, size_t len,
> + const u8 *buf, size_t *retlen);
> +};
> +
> +/**
> + * struct spinand_otp - SPI NAND OTP grouping structure
> + * @layout: OTP region layout
> + * @ops: OTP access ops
> + */
> +struct spinand_otp {
> + const struct spinand_otp_layout layout;
> + const struct spinand_otp_ops *ops;
> +};
> +
> /**
> * struct spinand_info - Structure used to describe SPI NAND chips
> * @model: model name
> @@ -354,6 +391,7 @@ struct spinand_info {
> } op_variants;
> int (*select_target)(struct spinand_device *spinand,
> unsigned int target);
> + struct spinand_otp otp;
> };
>
> #define SPINAND_ID(__method, ...) \
> @@ -379,6 +417,14 @@ struct spinand_info {
> #define SPINAND_SELECT_TARGET(__func) \
> .select_target = __func,
>
> +#define SPINAND_OTP_INFO(__npages, __ops) \
> + .otp = { \
> + .layout = { \
> + .npages = __npages, \
> + }, \
> + .ops = __ops, \
> + }
> +
> #define SPINAND_INFO(__model, __id, __memorg, __eccreq, __op_variants, \
> __flags, ...) \
> { \
> @@ -422,6 +468,7 @@ struct spinand_dirmap {
> * passed in spi_mem_op be DMA-able, so we can't based the bufs on
> * the stack
> * @manufacturer: SPI NAND manufacturer information
> + * @otp: SPI NAND OTP info.
> * @priv: manufacturer private data
> */
> struct spinand_device {
> @@ -450,6 +497,7 @@ struct spinand_device {
> u8 *oobbuf;
> u8 *scratchbuf;
> const struct spinand_manufacturer *manufacturer;
> + const struct spinand_otp *otp;
> void *priv;
> };
>
> @@ -525,4 +573,12 @@ int spinand_read_page(struct spinand_device *spinand,
> int spinand_write_page(struct spinand_device *spinand,
> const struct nand_page_io_req *req);
>
> +void spinand_set_mtd_otp_ops(struct spinand_device *spinand);
> +
> +int spinand_otp_read(struct spinand_device *spinand, loff_t from, size_t len,
> + u8 *buf, size_t *retlen);
> +
> +int spinand_otp_write(struct spinand_device *spinand, loff_t from, size_t len,
> + const u8 *buf, size_t *retlen);
> +
Why exposing spinand_otp_read and spinand_otp_write ?
> #endif /* __LINUX_MTD_SPINAND_H */
Thanks,
Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v1 3/5] mtd: spinand: make spinand_wait() global
2024-06-17 13:34 [PATCH v1 0/5] mtd: spinand: add OTP support Martin Kurbanov
2024-06-17 13:34 ` [PATCH v1 1/5] mtd: spinand: make spinand_{read,write}_page global Martin Kurbanov
2024-06-17 13:34 ` [PATCH v1 2/5] mtd: spinand: add OTP support Martin Kurbanov
@ 2024-06-17 13:34 ` Martin Kurbanov
2024-06-17 13:34 ` [PATCH v1 4/5] mtd: spinand: micron: OTP access for MT29F2G01ABAGD Martin Kurbanov
2024-06-17 13:34 ` [PATCH v1 5/5] mtd: spinand: esmt: OTP access for F50{L,D}1G41LB Martin Kurbanov
4 siblings, 0 replies; 7+ messages in thread
From: Martin Kurbanov @ 2024-06-17 13:34 UTC (permalink / raw)
To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Mika Westerberg, Michael Walle, Mark Brown, Chia-Lin Kao,
Md Sadre Alam, Ezra Buehler, Sridharan S N, Frieder Schrempf,
Alexey Romanov
Cc: linux-kernel, linux-mtd, kernel, Martin Kurbanov
Change the function spinand_wait() from static to global so that SPI
NAND flash drivers don't duplicate it.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
---
drivers/mtd/nand/spi/core.c | 18 ++++++++++++++----
include/linux/mtd/spinand.h | 3 +++
2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 2cb825edd49d0..c3e3d1e9599f1 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -496,10 +496,20 @@ static int spinand_erase_op(struct spinand_device *spinand,
return spi_mem_exec_op(spinand->spimem, &op);
}
-static int spinand_wait(struct spinand_device *spinand,
- unsigned long initial_delay_us,
- unsigned long poll_delay_us,
- u8 *s)
+/**
+ * spinand_wait() - Poll memory device status
+ * @spinand: the spinand device
+ * @initial_delay_us: delay in us before starting to poll
+ * @poll_delay_us: time to sleep between reads in us
+ * @s: the pointer to variable to store the value of REG_STATUS
+ *
+ * This function polls a status register (REG_STATUS) and returns when
+ * the STATUS_READY bit is 0 or when the timeout has expired.
+ *
+ * Return: 0 on success, a negative error code otherwise.
+ */
+int spinand_wait(struct spinand_device *spinand, unsigned long initial_delay_us,
+ unsigned long poll_delay_us, u8 *s)
{
struct spi_mem_op op = SPINAND_GET_FEATURE_OP(REG_STATUS,
spinand->scratchbuf);
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index a0d42a9be333f..3b9e7ed32c81d 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -567,6 +567,9 @@ int spinand_match_and_init(struct spinand_device *spinand,
int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
int spinand_select_target(struct spinand_device *spinand, unsigned int target);
+int spinand_wait(struct spinand_device *spinand, unsigned long initial_delay_us,
+ unsigned long poll_delay_us, u8 *s);
+
int spinand_read_page(struct spinand_device *spinand,
const struct nand_page_io_req *req);
--
2.43.2
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v1 4/5] mtd: spinand: micron: OTP access for MT29F2G01ABAGD
2024-06-17 13:34 [PATCH v1 0/5] mtd: spinand: add OTP support Martin Kurbanov
` (2 preceding siblings ...)
2024-06-17 13:34 ` [PATCH v1 3/5] mtd: spinand: make spinand_wait() global Martin Kurbanov
@ 2024-06-17 13:34 ` Martin Kurbanov
2024-06-17 13:34 ` [PATCH v1 5/5] mtd: spinand: esmt: OTP access for F50{L,D}1G41LB Martin Kurbanov
4 siblings, 0 replies; 7+ messages in thread
From: Martin Kurbanov @ 2024-06-17 13:34 UTC (permalink / raw)
To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Mika Westerberg, Michael Walle, Mark Brown, Chia-Lin Kao,
Md Sadre Alam, Ezra Buehler, Sridharan S N, Frieder Schrempf,
Alexey Romanov
Cc: linux-kernel, linux-mtd, kernel, Martin Kurbanov
Support for OTP area access on Micron MT29F2G01ABAGD chip.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
---
drivers/mtd/nand/spi/micron.c | 117 +++++++++++++++++++++++++++++++++-
1 file changed, 116 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 8d741be6d5f3e..a538409db4ccd 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -9,6 +9,7 @@
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/mtd/spinand.h>
+#include <linux/spi/spi-mem.h>
#define SPINAND_MFR_MICRON 0x2c
@@ -28,6 +29,16 @@
#define MICRON_SELECT_DIE(x) ((x) << 6)
+#define MICRON_MT29F2G01ABAGD_OTP_PAGES 12
+#define MICRON_MT29F2G01ABAGD_OTP_PAGE_SIZE 2176
+#define MICRON_MT29F2G01ABAGD_OTP_SIZE_BYTES \
+ (MICRON_MT29F2G01ABAGD_OTP_PAGES * \
+ MICRON_MT29F2G01ABAGD_OTP_PAGE_SIZE)
+
+#define MICRON_MT29F2G01ABAGD_CFG_OTP_STATE BIT(7)
+#define MICRON_MT29F2G01ABAGD_CFG_OTP_LOCK \
+ (CFG_OTP_ENABLE | MICRON_MT29F2G01ABAGD_CFG_OTP_STATE)
+
static SPINAND_OP_VARIANTS(quadio_read_cache_variants,
//SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -182,6 +193,108 @@ static int micron_8_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
+static int mt29f2g01abagd_otp_is_locked(struct spinand_device *spinand)
+{
+ size_t buf_size = MICRON_MT29F2G01ABAGD_OTP_PAGE_SIZE;
+ size_t retlen;
+ u8 *buf;
+ int ret;
+
+ buf = kmalloc(buf_size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = spinand_upd_cfg(spinand,
+ MICRON_MT29F2G01ABAGD_CFG_OTP_LOCK,
+ MICRON_MT29F2G01ABAGD_CFG_OTP_STATE);
+ if (ret)
+ goto out;
+
+ ret = spinand_otp_read(spinand, 0, buf_size, buf, &retlen);
+
+ if (spinand_upd_cfg(spinand, MICRON_MT29F2G01ABAGD_CFG_OTP_LOCK,
+ 0)) {
+ WARN(1, "Can not disable OTP mode\n");
+ ret = -EIO;
+ }
+
+ if (!ret) {
+ size_t i = 0;
+
+ /* If all zeros, then the OTP area is locked. */
+ while (i < buf_size && *(uint32_t *)(&buf[i]) == 0)
+ i += 4;
+
+ if (i == buf_size)
+ ret = 1;
+ }
+
+out:
+ kfree(buf);
+ return ret;
+}
+
+static int mt29f2g01abagd_otp_info(struct spinand_device *spinand, size_t len,
+ struct otp_info *buf, size_t *retlen)
+{
+ int locked;
+
+ if (len < sizeof(*buf))
+ return -EINVAL;
+
+ locked = mt29f2g01abagd_otp_is_locked(spinand);
+ if (locked < 0)
+ return locked;
+
+ buf->locked = locked;
+ buf->start = 0;
+ buf->length = MICRON_MT29F2G01ABAGD_OTP_SIZE_BYTES;
+
+ *retlen = sizeof(*buf);
+ return 0;
+}
+
+static int mt29f2g01abagd_otp_lock(struct spinand_device *spinand, loff_t from,
+ size_t len)
+{
+ struct spi_mem_op write_op = SPINAND_WR_EN_DIS_OP(true);
+ struct spi_mem_op exec_op = SPINAND_PROG_EXEC_OP(0);
+ int ret;
+
+ ret = spinand_upd_cfg(spinand,
+ MICRON_MT29F2G01ABAGD_CFG_OTP_LOCK,
+ MICRON_MT29F2G01ABAGD_CFG_OTP_LOCK);
+ if (!ret)
+ return ret;
+
+ ret = spi_mem_exec_op(spinand->spimem, &write_op);
+ if (!ret)
+ goto out;
+
+ ret = spi_mem_exec_op(spinand->spimem, &exec_op);
+ if (!ret)
+ goto out;
+
+ ret = spinand_wait(spinand, 10, 5, NULL);
+ if (!ret)
+ goto out;
+
+out:
+ if (spinand_upd_cfg(spinand, MICRON_MT29F2G01ABAGD_CFG_OTP_LOCK, 0)) {
+ WARN(1, "Can not disable OTP mode\n");
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static const struct spinand_otp_ops mt29f2g01abagd_otp_ops = {
+ .info = mt29f2g01abagd_otp_info,
+ .lock = mt29f2g01abagd_otp_lock,
+ .read = spinand_otp_read,
+ .write = spinand_otp_write,
+};
+
static const struct spinand_info micron_spinand_table[] = {
/* M79A 2Gb 3.3V */
SPINAND_INFO("MT29F2G01ABAGD",
@@ -193,7 +306,9 @@ static const struct spinand_info micron_spinand_table[] = {
&x4_update_cache_variants),
0,
SPINAND_ECCINFO(µn_8_ooblayout,
- micron_8_ecc_get_status)),
+ micron_8_ecc_get_status),
+ SPINAND_OTP_INFO(MICRON_MT29F2G01ABAGD_OTP_PAGES,
+ &mt29f2g01abagd_otp_ops)),
/* M79A 2Gb 1.8V */
SPINAND_INFO("MT29F2G01ABBGD",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x25),
--
2.43.2
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v1 5/5] mtd: spinand: esmt: OTP access for F50{L,D}1G41LB
2024-06-17 13:34 [PATCH v1 0/5] mtd: spinand: add OTP support Martin Kurbanov
` (3 preceding siblings ...)
2024-06-17 13:34 ` [PATCH v1 4/5] mtd: spinand: micron: OTP access for MT29F2G01ABAGD Martin Kurbanov
@ 2024-06-17 13:34 ` Martin Kurbanov
4 siblings, 0 replies; 7+ messages in thread
From: Martin Kurbanov @ 2024-06-17 13:34 UTC (permalink / raw)
To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
Mika Westerberg, Michael Walle, Mark Brown, Chia-Lin Kao,
Md Sadre Alam, Ezra Buehler, Sridharan S N, Frieder Schrempf,
Alexey Romanov
Cc: linux-kernel, linux-mtd, kernel, Martin Kurbanov
Support for OTP area access on ESMT F50L1G41LB and F50D1G41LB chips.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
---
drivers/mtd/nand/spi/esmt.c | 69 +++++++++++++++++++++++++++++++++++--
1 file changed, 67 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/spi/esmt.c b/drivers/mtd/nand/spi/esmt.c
index 4597a82de23a4..1806e9d48c176 100644
--- a/drivers/mtd/nand/spi/esmt.c
+++ b/drivers/mtd/nand/spi/esmt.c
@@ -12,6 +12,13 @@
/* ESMT uses GigaDevice 0xc8 JECDEC ID on some SPI NANDs */
#define SPINAND_MFR_ESMT_C8 0xc8
+#define ESMT_F50L1G41LB_CFG_OTP_PROTECT BIT(7)
+#define ESMT_F50L1G41LB_CFG_OTP_LOCK \
+ (CFG_OTP_ENABLE | ESMT_F50L1G41LB_CFG_OTP_PROTECT)
+
+#define ESMT_F50L1G41LB_PAGE_SIZE 2112
+#define ESMT_F50L1G41LB_OTP_PAGES 28
+
static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
@@ -102,6 +109,60 @@ static const struct mtd_ooblayout_ops f50l1g41lb_ooblayout = {
.free = f50l1g41lb_ooblayout_free,
};
+static int f50l1g41lb_otp_info(struct spinand_device *spinand, size_t len,
+ struct otp_info *buf, size_t *retlen)
+{
+ if (len < sizeof(*buf))
+ return -EINVAL;
+
+ buf->locked = 0;
+ buf->start = 0;
+ buf->length = ESMT_F50L1G41LB_PAGE_SIZE * ESMT_F50L1G41LB_OTP_PAGES;
+
+ *retlen = sizeof(*buf);
+ return 0;
+}
+
+static int f50l1g41lb_otp_lock(struct spinand_device *spinand, loff_t from,
+ size_t len)
+{
+ struct spi_mem_op write_op = SPINAND_WR_EN_DIS_OP(true);
+ struct spi_mem_op exec_op = SPINAND_PROG_EXEC_OP(0);
+ int ret;
+
+ ret = spinand_upd_cfg(spinand, ESMT_F50L1G41LB_CFG_OTP_LOCK,
+ ESMT_F50L1G41LB_CFG_OTP_LOCK);
+ if (!ret)
+ return ret;
+
+ ret = spi_mem_exec_op(spinand->spimem, &write_op);
+ if (!ret)
+ goto out;
+
+ ret = spi_mem_exec_op(spinand->spimem, &exec_op);
+ if (!ret)
+ goto out;
+
+ ret = spinand_wait(spinand, 10, 5, NULL);
+ if (!ret)
+ goto out;
+
+out:
+ if (spinand_upd_cfg(spinand, ESMT_F50L1G41LB_CFG_OTP_LOCK, 0)) {
+ WARN(1, "Can not disable OTP mode\n");
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static const struct spinand_otp_ops f50l1g41lb_otp_ops = {
+ .info = f50l1g41lb_otp_info,
+ .lock = f50l1g41lb_otp_lock,
+ .read = spinand_otp_read,
+ .write = spinand_otp_write,
+};
+
static const struct spinand_info esmt_c8_spinand_table[] = {
SPINAND_INFO("F50L1G41LB",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x01, 0x7f,
@@ -112,7 +173,9 @@ static const struct spinand_info esmt_c8_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)),
+ SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL),
+ SPINAND_OTP_INFO(ESMT_F50L1G41LB_OTP_PAGES,
+ &f50l1g41lb_otp_ops)),
SPINAND_INFO("F50D1G41LB",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x11, 0x7f,
0x7f, 0x7f),
@@ -122,7 +185,9 @@ static const struct spinand_info esmt_c8_spinand_table[] = {
&write_cache_variants,
&update_cache_variants),
0,
- SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)),
+ SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL),
+ SPINAND_OTP_INFO(ESMT_F50L1G41LB_OTP_PAGES,
+ &f50l1g41lb_otp_ops)),
SPINAND_INFO("F50D2G41KA",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x51, 0x7f,
0x7f, 0x7f),
--
2.43.2
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 7+ messages in thread