* [PATCH 1/2] mtd: spinand: gigadevice: add support for GD5F4GM7UExxG
2026-11-16 15:28 [PATCH 0/2] mtd: spinand: add GD5F4GM7UExxG and XT26G04C Angelo Compagnucci
@ 2026-11-16 15:28 ` Angelo Compagnucci
2026-11-16 15:28 ` [PATCH 2/2] mtd: spinand: xtx: add support for XT26G04C Angelo Compagnucci
1 sibling, 0 replies; 3+ messages in thread
From: Angelo Compagnucci @ 2026-11-16 15:28 UTC (permalink / raw)
To: Miquel Raynal
Cc: Richard Weinberger, Vignesh Raghavendra, linux-mtd, linux-kernel,
Angelo Compagnucci
Add the GigaDevice GD5F4GM7UExxG. It is a 4Gbit 3.3V SPI NAND with
4096 byte pages and 256 byte OOB.
The ECC status works like on the GD5F4GM8. With ECC enabled, only the
first 128 OOB bytes are free. The other 128 hold the ECC parity, like
on the GD5F4GQ4xC. The Quad IO read needs two dummy bytes, like on the
GD5F1GQ5.
The values come from the GigaDevice datasheet DS-01326, Rev 1.0.
Tested on an STM32MP133 board with UBI and UBIFS.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
---
drivers/mtd/nand/spi/gigadevice.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index a6d6d6e0c..990f2d271 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -564,6 +564,16 @@ static const struct spinand_info gigadevice_spinand_table[] = {
SPINAND_HAS_QE_BIT,
SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
gd5fxgq4uexxg_ecc_get_status)),
+ SPINAND_INFO("GD5F4GM7UExxG",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x94),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_1gq5,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&gd5fxgq4xc_oob_256_ops,
+ gd5fxgq4uexxg_ecc_get_status)),
SPINAND_INFO("GD5F4GM8UExxG",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x95),
NAND_MEMORG(1, 2048, 128, 64, 4096, 80, 1, 1, 1),
--
2.53.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH 2/2] mtd: spinand: xtx: add support for XT26G04C
2026-11-16 15:28 [PATCH 0/2] mtd: spinand: add GD5F4GM7UExxG and XT26G04C Angelo Compagnucci
2026-11-16 15:28 ` [PATCH 1/2] mtd: spinand: gigadevice: add support for GD5F4GM7UExxG Angelo Compagnucci
@ 2026-11-16 15:28 ` Angelo Compagnucci
1 sibling, 0 replies; 3+ messages in thread
From: Angelo Compagnucci @ 2026-11-16 15:28 UTC (permalink / raw)
To: Miquel Raynal
Cc: Richard Weinberger, Vignesh Raghavendra, linux-mtd, linux-kernel,
Angelo Compagnucci
Add the XTX XT26G04C. It is a 4Gbit 3.3V SPI NAND with 4096 byte pages,
256 byte OOB and 8-bit on-die ECC.
The status register reports the number of corrected bits in bits 7:4.
Values 0 to 8 are valid and 0xf means an uncorrectable error. The other
XTX parts use a different format, so add a new ECC status function.
The values come from the XTX XT26G04C datasheet, Rev 1.9.
Tested on an STM32MP133 board with UBI and UBIFS.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
---
drivers/mtd/nand/spi/xtx.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/mtd/nand/spi/xtx.c b/drivers/mtd/nand/spi/xtx.c
index 5915b37b4..70f853678 100644
--- a/drivers/mtd/nand/spi/xtx.c
+++ b/drivers/mtd/nand/spi/xtx.c
@@ -22,6 +22,9 @@
#define XT26XXXD_STATUS_ECC_8_CORRECTED (3)
#define XT26XXXD_STATUS_ECC_UNCOR_ERROR (2)
+#define XT26G0XC_STATUS_ECC_MASK GENMASK(7, 4)
+#define XT26G0XC_STATUS_ECC_UNCOR_ERROR (0xf)
+
static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_1S_4S_4S_OP(0, 1, NULL, 0, 0),
SPINAND_PAGE_READ_FROM_CACHE_1S_1S_4S_OP(0, 1, NULL, 0, 0),
@@ -138,6 +141,21 @@ static int xt26xxxd_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
+
+static int xt26g0xc_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
+{
+ u8 eccsr = FIELD_GET(XT26G0XC_STATUS_ECC_MASK, status);
+
+ if (eccsr <= 8)
+ return eccsr;
+
+ if (eccsr == XT26G0XC_STATUS_ECC_UNCOR_ERROR)
+ return -EBADMSG;
+
+ return -EINVAL;
+}
+
static const struct spinand_info xtx_spinand_table[] = {
SPINAND_INFO("XT26G01A",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE1),
@@ -249,6 +267,16 @@ static const struct spinand_info xtx_spinand_table[] = {
0,
SPINAND_ECCINFO(&xt26xxxd_ooblayout,
xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26G04C",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x13),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26g0xc_ecc_get_status)),
};
static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {
--
2.53.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 3+ messages in thread