From: Takahiro Kuwano <tkuw584924@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: tudor.ambarus@microchip.com, miquel.raynal@bootlin.com,
richard@nod.at, vigneshr@ti.com, p.yadav@ti.com,
Bacem.Daassi@infineon.com,
Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Subject: Re: [PATCH v6 0/3] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t
Date: Thu, 15 Jul 2021 15:34:18 +0900 [thread overview]
Message-ID: <3a760ae3-a7af-bbc5-5272-ef6d6e29c1f7@gmail.com> (raw)
In-Reply-To: <cover.1623831222.git.Takahiro.Kuwano@infineon.com>
Hi,
I found some critical changes are missing from this series.
I will submit new version.
On 6/16/2021 5:44 PM, tkuw584924@gmail.com wrote:
> From: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
>
> The S25HL-T/S25HS-T family is the Cypress Semper Flash with Quad SPI.
>
> The summary datasheets can be found in the following links.
> https://www.cypress.com/file/424146/download (256Mb/512Mb/1Gb, single die)
>
> The full version can be found in the following links (registration
> required).
> https://community.cypress.com/t5/Semper-Flash-Access-Program/Datasheet-Semper-Flash-with-Quad-SPI/ta-p/260789?attachment-id=19522
>
> Tested on Xilinx Zynq-7000 FPGA board.
>
> Changes in v6:
> - Remove 2Gb dual die package parts and related changes to split mulit
> die package support into another series of patches
>
> Changes in v5:
> - Fix 'if (ret == 1)' to 'if (ret < 0)' in spansion_read_any_reg()
> - Add NO_CHIP_ERASE flag to S25HL02GT and S25HS02GT
>
> Changes in v4:
> - Reword 'legacy' to 'default'
> - Rename spi_nor_read() to spi_nor_default_ready()
> - Fix dummy cycle calculation in spansion_read_any_reg()
> - Modify comment for spansion_write_any_reg()
> - Merge block comments about SMPT in s25hx_t_post_sfdp_fixups()
> - Remove USE_CLSR flags from S25HL02GT and S25HS02GT
>
> Changes in v3:
> - Split into multiple patches
> - Remove S25HL256T and S25HS256T
> - Add S25HL02GT and S25HS02GT
> - Add support for multi-die package parts support
> - Cleanup Read/Write Any Register implementation
> - Remove erase_map fix for top/split sector layout
> - Set ECC data unit size (16B) to writesize
>
> Changes in v2:
> - Remove SPI_NOR_SKIP_SFDP flag and clean up related fixups
> - Check CFR3V[4] to determine page_size instead of force 512B
> - Depend on the patchset below to support non-uniform sector layout
> https://lore.kernel.org/linux-mtd/cover.1601612872.git.Takahiro.Kuwano@infineon.com/
>
> Takahiro Kuwano (3):
> mtd: spi-nor: spansion: Add support for Read/Write Any Register
> mtd: spi-nor: spansion: Add support for volatile QE bit
> mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups
>
> drivers/mtd/spi-nor/spansion.c | 278 +++++++++++++++++++++++++++++++++
> 1 file changed, 278 insertions(+)
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2021-07-15 6:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-16 8:44 [PATCH v6 0/3] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t tkuw584924
2021-06-16 8:44 ` [PATCH v6 1/3] mtd: spi-nor: spansion: Add support for Read/Write Any Register tkuw584924
2021-06-16 8:44 ` [PATCH v6 2/3] mtd: spi-nor: spansion: Add support for volatile QE bit tkuw584924
2021-06-16 8:44 ` [PATCH v6 3/3] mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups tkuw584924
2021-07-15 6:34 ` Takahiro Kuwano [this message]
2021-07-16 6:27 ` [PATCH v6 0/3] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3a760ae3-a7af-bbc5-5272-ef6d6e29c1f7@gmail.com \
--to=tkuw584924@gmail.com \
--cc=Bacem.Daassi@infineon.com \
--cc=Takahiro.Kuwano@infineon.com \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=p.yadav@ti.com \
--cc=richard@nod.at \
--cc=tudor.ambarus@microchip.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox