* UBIFS and High Availability schemes
@ 2014-04-02 8:19 Apostolos Manolitzas
2014-04-02 21:12 ` Richard Weinberger
0 siblings, 1 reply; 2+ messages in thread
From: Apostolos Manolitzas @ 2014-04-02 8:19 UTC (permalink / raw)
To: linux-mtd@lists.infradead.org
Hello all,
I am in the middle of researching for technical options for high
availability (replication mainly) between two systems with NAND
flash(UBIFS). I found the file systems drbd <http://www.drbd.org/> and
GlusterFS <http://www.gluster.org/> but I didn't have much success on
configuring drbd above UBIFS. In the UBI FAQ, it notes that doesn't
support NFS but it's the same for the drbd?
Thanks for sharing any experiences that you may have with a similar
setup or similar problem.
-Apostolos
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: UBIFS and High Availability schemes
2014-04-02 8:19 UBIFS and High Availability schemes Apostolos Manolitzas
@ 2014-04-02 21:12 ` Richard Weinberger
0 siblings, 0 replies; 2+ messages in thread
From: Richard Weinberger @ 2014-04-02 21:12 UTC (permalink / raw)
To: Apostolos Manolitzas; +Cc: linux-mtd@lists.infradead.org
On Wed, Apr 2, 2014 at 10:19 AM, Apostolos Manolitzas
<manap@intracom-telecom.com> wrote:
> Hello all,
>
> I am in the middle of researching for technical options for high
> availability (replication mainly) between two systems with NAND
> flash(UBIFS). I found the file systems drbd <http://www.drbd.org/> and
> GlusterFS <http://www.gluster.org/> but I didn't have much success on
> configuring drbd above UBIFS. In the UBI FAQ, it notes that doesn't
> support NFS but it's the same for the drbd?
DRBD works on top of block devices, not MTD.
--
Thanks,
//richard
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-04-02 21:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-02 8:19 UBIFS and High Availability schemes Apostolos Manolitzas
2014-04-02 21:12 ` Richard Weinberger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox