[PATCH] mtd: fix comment typos in UBI and NAND headers

* [PATCH] mtd: fix comment typos in UBI and NAND headers
@ 2026-09-15 12:55 Ruslan Vagner
  2026-09-19  6:57 ` Miquel Raynal
  0 siblings, 1 reply; 2+ messages in thread
From: Ruslan Vagner @ 2026-09-15 12:55 UTC (permalink / raw)
  To: linux-mtd; +Cc: miquel.raynal, richard, Ruslan Vagner

Fix the spelling in comments. No functional change.

Signed-off-by: Ruslan Vagner <rusya92266@gmail.com>
---
 drivers/mtd/ubi/wl.c         | 2 +-
 include/linux/mtd/rawnand.h  | 2 +-
 include/linux/mtd/sh_flctl.h | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 5a0db928a90e..44237de52250 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -1486,7 +1486,7 @@ static bool scrub_possible(struct ubi_device
*ubi, struct ubi_wl_entry *e)
  * @pnum: the physical eraseblock to schedule
  * @force: don't read the block, assume bitflips happened and take action.
  *
- * This function reads the given eraseblock and checks if bitflips occured.
+ * This function reads the given eraseblock and checks if bitflips occurred.
  * In case of bitflips, the eraseblock is scheduled for scrubbing.
  * If scrubbing is forced with @force, the eraseblock is not read,
  * but scheduled for scrubbing right away.
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 5c70e7bd3ed5..43fefff02025 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1592,7 +1592,7 @@ void nand_wait_ready(struct nand_chip *chip);

 /*
  * Free resources held by the NAND device, must be called on error after a
- * sucessful nand_scan().
+ * successful nand_scan().
  */
 void nand_cleanup(struct nand_chip *chip);

diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
index 78fc2d4218c8..f3ce3253e8ec 100644
--- a/include/linux/mtd/sh_flctl.h
+++ b/include/linux/mtd/sh_flctl.h
@@ -61,7 +61,7 @@
  * to control the clock divider used between the High-Speed Peripheral Clock
  * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
  * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
- * bit version the divider is seperate for the pulse width of high and low
+ * bit version the divider is separate for the pulse width of high and low
  * signals.
  */
 #define PULSE3	(0x1 << 27)
-- 
2.54.0.windows.1

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply related	[flat|nested] 2+ messages in thread