[PATCH v2 0/2] mtd: spi-nor: spansion: fix die erase support

[PATCH v2 0/2] mtd: spi-nor: spansion: fix die erase support

[tkuw584924]

From: Takahiro Kuwano <takahiro.kuwano@infineon.com>

Changes in v2:
- Collected trailers
- Fixed author email in headers

Takahiro Kuwano (2):
  mtd: spi-nor: spansion: use die erase for multi-die devices only
  mtd: spi-nor: spansion: add die erase support in s28hx-t

 drivers/mtd/spi-nor/spansion.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

-- 
2.43.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v2 1/2] mtd: spi-nor: spansion: use die erase for multi-die devices only

[tkuw584924]

From: Takahiro Kuwano <takahiro.kuwano@infineon.com>

Die erase opcode is supported in multi-die devices only. For single die
devices, default chip erase opcode must be used.

In s25hx_t_late_init(), die erase opcode is set only when the device is
multi-die.

Fixes: 461d0babb544 ("mtd: spi-nor: spansion: enable die erase for multi die flashes")
Cc: stable@kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
---
 drivers/mtd/spi-nor/spansion.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 8498c7003d88..b6023076903a 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -674,7 +674,9 @@ static int s25hx_t_late_init(struct spi_nor *nor)
 	params->ready = cypress_nor_sr_ready_and_clear;
 	cypress_nor_ecc_init(nor);
 
-	params->die_erase_opcode = SPINOR_OP_CYPRESS_DIE_ERASE;
+	if (params->n_dice > 1)
+		params->die_erase_opcode = SPINOR_OP_CYPRESS_DIE_ERASE;
+
 	return 0;
 }
 
-- 
2.43.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v2 1/2] mtd: spi-nor: spansion: use die erase for multi-die devices only

[Michael Walle]

[-- Attachment #1.1: Type: text/plain, Size: 738 bytes --]

On Wed May 27, 2026 at 11:05 AM CEST, tkuw584924 wrote:
> From: Takahiro Kuwano <takahiro.kuwano@infineon.com>
>
> Die erase opcode is supported in multi-die devices only. For single die
> devices, default chip erase opcode must be used.
>
> In s25hx_t_late_init(), die erase opcode is set only when the device is
> multi-die.
>
> Fixes: 461d0babb544 ("mtd: spi-nor: spansion: enable die erase for multi die flashes")
> Cc: stable@kernel.org
> Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Signed-off-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>

Reviewed-by: Michael Walle <mwalle@kernel.org>


[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 297 bytes --]

[-- Attachment #2: Type: text/plain, Size: 144 bytes --]

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH v2 2/2] mtd: spi-nor: spansion: add die erase support in s28hx-t

[tkuw584924]

From: Takahiro Kuwano <takahiro.kuwano@infineon.com>

S28Hx-T family has multi-die devices that support die erase opcode.
Update die erase opcode when the device is multi-die.

Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
---
 drivers/mtd/spi-nor/spansion.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index b6023076903a..65227d989de1 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -762,6 +762,9 @@ static int s28hx_t_late_init(struct spi_nor *nor)
 	params->ready = cypress_nor_sr_ready_and_clear;
 	cypress_nor_ecc_init(nor);
 
+	if (params->n_dice > 1)
+		params->die_erase_opcode = SPINOR_OP_CYPRESS_DIE_ERASE;
+
 	return 0;
 }
 
-- 
2.43.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v2 2/2] mtd: spi-nor: spansion: add die erase support in s28hx-t

[Michael Walle]

[-- Attachment #1.1: Type: text/plain, Size: 1269 bytes --]

On Wed May 27, 2026 at 11:05 AM CEST, tkuw584924 wrote:
> From: Takahiro Kuwano <takahiro.kuwano@infineon.com>
>
> S28Hx-T family has multi-die devices that support die erase opcode.
> Update die erase opcode when the device is multi-die.
>
> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
> Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
> Signed-off-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
> ---
>  drivers/mtd/spi-nor/spansion.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
> index b6023076903a..65227d989de1 100644
> --- a/drivers/mtd/spi-nor/spansion.c
> +++ b/drivers/mtd/spi-nor/spansion.c
> @@ -762,6 +762,9 @@ static int s28hx_t_late_init(struct spi_nor *nor)
>  	params->ready = cypress_nor_sr_ready_and_clear;
>  	cypress_nor_ecc_init(nor);
>  
> +	if (params->n_dice > 1)
> +		params->die_erase_opcode = SPINOR_OP_CYPRESS_DIE_ERASE;
> +

So this seems to be a common theme for the spansion/cypress flashes.
Does it make sense to have a .mfr_flag USE_DIE_ERASE or
SUPPORTS_DIE_ERASE that can be set in the flash entry instead of
having many different fixups?

-michael

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 297 bytes --]

[-- Attachment #2: Type: text/plain, Size: 144 bytes --]

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

RE: [PATCH v2 2/2] mtd: spi-nor: spansion: add die erase support in s28hx-t

[Takahiro.Kuwano]

> 
> On Wed May 27, 2026 at 11:05 AM CEST, tkuw584924 wrote:
> > From: Takahiro Kuwano <takahiro.kuwano@infineon.com>
> >
> > S28Hx-T family has multi-die devices that support die erase opcode.
> > Update die erase opcode when the device is multi-die.
> >
> > Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
> > Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
> > Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > Signed-off-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
> > ---
> >  drivers/mtd/spi-nor/spansion.c | 3 +++
> >  1 file changed, 3 insertions(+)
> >
> > diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
> > index b6023076903a..65227d989de1 100644
> > --- a/drivers/mtd/spi-nor/spansion.c
> > +++ b/drivers/mtd/spi-nor/spansion.c
> > @@ -762,6 +762,9 @@ static int s28hx_t_late_init(struct spi_nor *nor)
> >  	params->ready = cypress_nor_sr_ready_and_clear;
> >  	cypress_nor_ecc_init(nor);
> >
> > +	if (params->n_dice > 1)
> > +		params->die_erase_opcode = SPINOR_OP_CYPRESS_DIE_ERASE;
> > +
> 
> So this seems to be a common theme for the spansion/cypress flashes.
> Does it make sense to have a .mfr_flag USE_DIE_ERASE or
> SUPPORTS_DIE_ERASE that can be set in the flash entry instead of
> having many different fixups?

Yes, actually I plan to cleanup spansion.c later on, by using mfr_flags.
There are common features (incl. die-erase) across the device families that
appear in different fixups. I think I need to consolidate them and reduce
the number of fixup functions.

Thanks,
Takahiro



______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH v2 0/2] mtd: spi-nor: spansion: fix die erase support

[Pratyush Yadav]

On Wed, May 27 2026, tkuw584924@gmail.com wrote:

> From: Takahiro Kuwano <takahiro.kuwano@infineon.com>

Applied to spi-nor/next. Thanks!

-- 
Regards,
Pratyush Yadav

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/