* kernel compile issues
@ 2003-07-28 4:25 Travis Osterman
0 siblings, 0 replies; only message in thread
From: Travis Osterman @ 2003-07-28 4:25 UTC (permalink / raw)
To: newbie list
I posted a few days ago regarding compilation problems. After
consulting the RH manual, google, and retrying the tips I received here,
I have gotten further, but still cannot achieve the entire process. I
am running an 18 gig scsi2 drive drive as my main drive with an
AHA2930U2 Adaptec card. The only configuration of the kernel I changed
was to add the scsi driver support directly into the kernel. The
following commands run as root give no errors.
# make clean
# make distclean
# make mrproper
# make xconfig
# make dep
# make bzImage
# make modules
# make modules_install
# ./mkinitrd /boot/initrd-2.4.20-8-matrox.img 2.4.20-8
# cp arch/i386/boot/bzImage /boot/vmlinz-matrox
Using grub, the following boots the old kernel fine:
title Red Hat Linux (2.4.20-8)
root (hd0,5)
kernel /vmlinuz-2.4.20-8 ro root=LABEL=/ hda=ide-scsi
initrd /initrd-2.4.20-8.img
However, if I choose to load the following from grub, I receive the
error message located below the entry.
title Matrox Install
root (hd0,5)
kernel /vmlinuz-matrox ro root=LABEL=/ hda=ide-scsi
initrd /initrd-2.4.20-8.img
ds: no socket drivers loaded
vfs: cannot open root dev "label=/" or 00:00
please append a correct "root=" boot option
kernel panic: vfs: unable to mount root fs on 00:00
Finally, I attempted to load the following (honestly not knowing what
some of the other parameters were for) and found that I received a
[failure] on loading modules like mousedev, usb, etc. The boot did
proceed however.
title Matrox Install 2
root(hd0,5)
kernel /vmlinuz-matrox
After performing all of this, I read that two files may need backed up
and copied after compilation so I performed the following:
# mv /boot/System.map /boot/System.oldmap
# cp /usr/src/linux-2.4.20-8/System.map /boot/
# mv /boot/config-2.4.20-8 /boot/config-2.4.20-8-old
# cp /usr/src/linux-2.4.20-8/.config /boot/config-2.4.20-8
This seemed to not affect the boot process of any of the three
configurations I have listed. I'm really not sure what my next step
is. Thank you for your help and understanding.
-- Travis
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-07-28 4:25 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-07-28 4:25 kernel compile issues Travis Osterman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox