* usb-storage
@ 2004-02-02 16:59 Thorsten Alge
2004-02-03 6:41 ` usb-storage pa3gcu
0 siblings, 1 reply; 2+ messages in thread
From: Thorsten Alge @ 2004-02-02 16:59 UTC (permalink / raw)
To: linux-newbie@vger.kernel.org
hi,
i have some problems with my USB-Harddisk. When i plug it in, i got the
following errors:
hub.c: new USB device 00:09.3-6.1, assigned address 3
usb.c: USB device 3 (vend/prod 0x5e3/0x702) is not claimed by any active
driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: FUJITSU Model: MHR2030AT Rev: 0811
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
sda:<6>Device not ready. Make sure there is a disc in the drive.
usb_control/bulk_msg: timeout
...
usb_control/bulk_msg: timeout
I dont know how to fix it. can anyone help??
thanks,
thorsten
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: usb-storage
2004-02-02 16:59 usb-storage Thorsten Alge
@ 2004-02-03 6:41 ` pa3gcu
0 siblings, 0 replies; 2+ messages in thread
From: pa3gcu @ 2004-02-03 6:41 UTC (permalink / raw)
To: Thorsten Alge, linux-newbie@vger.kernel.org
On Monday 02 February 2004 17:59, Thorsten Alge wrote:
> hi,
>
> i have some problems with my USB-Harddisk. When i plug it in, i got the
> following errors:
I personally have never encounderd your problem, but i did a search on
google.com/linux and found the following mail, it represents your problem in
many ways, it also has a solution suggested as well.
http://mailman.u.washington.edu/pipermail/linux/2002-November/005302.html
> hub.c: new USB device 00:09.3-6.1, assigned address 3
> usb.c: USB device 3 (vend/prod 0x5e3/0x702) is not claimed by any active
> driver.
> Initializing USB Mass Storage driver...
> usb.c: registered new driver usb-storage
> scsi1 : SCSI emulation for USB Mass Storage devices
> Vendor: FUJITSU Model: MHR2030AT Rev: 0811
> Type: Direct-Access ANSI SCSI revision: 02
> Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
> SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
> sda:<6>Device not ready. Make sure there is a disc in the drive.
> usb_control/bulk_msg: timeout
> ...
> usb_control/bulk_msg: timeout
>
> I dont know how to fix it. can anyone help??
>
>
> thanks,
>
> thorsten
>
--
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.
Regards Richard
pa3gcu@zeelandnet.nl
http://people.zeelandnet.nl/pa3gcu/
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-02-03 6:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-02 16:59 usb-storage Thorsten Alge
2004-02-03 6:41 ` usb-storage pa3gcu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox