GNU OCR

GNU OCR

[Matthew Stapleton]

Does anyone know of a GNU or opensource OCR project that is comparable to
commercial suites?

Thanks,
Matthew Stapleton
============================
http://webpages.marshall.edu/~staple12
http://trialbyexistence.hxc.com
============================
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Re: GNU OCR

[Ray Olszewski]

At 02:03 AM 8/2/02 -0400, Matthew Stapleton wrote:
>Does anyone know of a GNU or opensource OCR project that is comparable to
>commercial suites?

The Debian database lists two OCR packages:

         gocr (actually, about seven related packages), which from the 
description sounds
                 like an early-stage, limited project
         clara, which is described as "intended for large scale digitalization
                 projects. It features a powerful GUI and a web interface
                 for cooperative digitalization of books."

No personal experience with either, though. In any case, "comparable" is in 
the eye of the beholder, at least past some threshhold of performance.

If you are a Debian user, the usual apt-* commands will get you the 
relevant packages. If you use a different distro, I suppose you either look 
in its database or track down the originating sites in the usual ways.


--
-------------------------------------------"Never tell me the odds!"--------
Ray Olszewski					-- Han Solo
Palo Alto, California, USA			  ray@comarre.com
-------------------------------------------------------------------------------

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

IRQ conflict

[Frank Roberts - SOTL]

Hi All;

Hope some one understands what I am saying more than I do and can explain what 
procedures I should utilize to correct the problem.

I have added a scsi card back into this box (It was in the box once before) 
and I am getting a IRQ conflict as follows: 

PCI: Found IRQ 11 for device 00:0e.0
IRQ routing conflict for 00:07.2, have irq 5, want irq 11
IRQ routing conflict for 00:07.3, have irq 5, want irq 11
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5
        <Adaptec 2902/04/10/15/20/30C SCSI adapter>
        aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs

I know that this box has worked with its current bios configuration under RH 
7.2 and that the modification made to the system at that time were not in the 
bios. The box was upgraded to RH 7.3 due to a massive human generated system 
failure.

What I would appreciate help with is how does one go about resolving IRQ 
conflicts.

Thanks
Frank




-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs