Re: Type II PCMCIA, how can I tell?

Re: Type II PCMCIA, how can I tell?

[rob.rice]

a type one PCMCIA crd is about 3/16" thick a type two is twice that look at the slot for how thick of a card it will accept if it will accept two type one cards it will accept one type two 
> 
> From: Chuck Gelm <nc8q@gelm.net>
> Date: 2002/12/03 Tue PM 05:51:08 EST
> To: Linux Newbie <linux-newbie@vger.kernel.org>
> Subject: Type II PCMCIA, how can I tell?
> 
> How can I tell if my laptop is "Type II PCMCIA" ?
> 
> Regards, Chuck
> -
> To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.linux-learn.org/faqs
> 

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Re: Type II PCMCIA SLOT, how can I tell?

[Chuck Gelm]

was Re: Type II PCMCIA, how can I tell?

 It is not the PC-CARD that I am in question about.
It is the PCMCIA interface in an old laptop.

 Is there some program I can run to check the interface
to see if it is PCMCIA Type II ?

Thanks, Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Belkin F5D6020: Is this a prism card?

[Chuck Gelm]

Howdy, Y'all:

 I plugged a Belkin F5D6020 PC card into a slackware 8.0
kernel 2.2.19 laptop and this is what it reported:

cardmgr[49] initializing socket 1
cardmgr[49] unsupported socket 1 product info "Belkin",
            "11Mbps-Wireless-Notebook-Network-Adapter
cardmgr[49] manfid, 0x01bf, 0x3302  function: 6 (network)

 I'm building a kernel now, but ..

 When I first ran linux-wlan-ng-0.1.16-pre7/.Configure
it complained about not finding /usr/src/pcmcia-cs-3.1.26 (IIRC).
Where/how do I obtain /usr/src/pcmcia-cs-3.1.26/*  ?

Thanks, Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Belkin F5D6020: part 2

[Chuck Gelm]

Howdy, Y'all:

Belkin F5D6020: part 2

 Slackware v8.0, kernel 2.2.19, Dell Latitude XPi CD,
pentium 166, 1.1 Gigabyte HD, 16 megabytes RAM,
Belkin F5D6020 PC-card, linux-wlan-0.1.16-pre7:

#root@dell:/# /etc/rc.d/rc.wlan start
Starting WLAN Devices: wlanctl-ng: No such device
Failed to enable the device, exitcode = 1.
grep /proc/net/p80211/wlan0/wlandev: No such file or directory
wlanctl-ng: No such device
dot11PrivacyOptionImplemented mibget failed.
wlanctl-ng: No such device
error: Autojoin indicated failure!

 What am I committing or omitting?

Regards, Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Belkin F5D6020 ver.2: image

[Chuck Gelm]

Here is an image of the label on a recently purchased
Belkin F5D6020 ver. 2  wireless network pc-card.
http://gelm.net/images/f5d6020-100.jpg

The 'system requirements' mentioned on the box were:

- PC compatible computer with available PCMCIA slot
- Windows(r) 98, 2000, Me, or XP

No mention of 'Type II' or '32 bit interface'.

The image is about 24 kilobytes.

HTH, Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs