* adsl pppoa connection
@ 2005-12-30 19:57 Andrew
2005-12-31 18:08 ` Hal MacArgle
0 siblings, 1 reply; 2+ messages in thread
From: Andrew @ 2005-12-30 19:57 UTC (permalink / raw)
To: linux-newbie
I'm trying to set up an adsl pppoa Internet connection on Slackware 10.2
with kernel 2.6.13, which includes the cxacru driver known to work with
vigor 318 modem.
The modem shows up in /proc/bus/usb/devices.
cat /proc/net/atm/cxacru\:0 :
ADSL USB MODEM (usb-0000:00:0a.0-1)
MAC: 00:50:7f:18:75:6e
AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop )
Line up
Leds light up correctly.
Running pppd gets as far as:
Connect: ppp0 <--> /dev/pts/0
Connection terminated
Modem hangup
Exit
The message in syslog is LCP: timeout sending Config-Requests
It seems I am not getting an IP address (dynamic).
According to my ISP, no username or password are required;
authentication is apparently done by phone number.
Does anybody have any idea where I go from here? Or what I should put in
my ppp/options?
TIA,
Andrew
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: adsl pppoa connection
2005-12-30 19:57 adsl pppoa connection Andrew
@ 2005-12-31 18:08 ` Hal MacArgle
0 siblings, 0 replies; 2+ messages in thread
From: Hal MacArgle @ 2005-12-31 18:08 UTC (permalink / raw)
To: Andrew; +Cc: linux-newbie
On 12-30, Andrew wrote:
> I'm trying to set up an adsl pppoa Internet connection on Slackware 10.2
> with kernel 2.6.13, which includes the cxacru driver known to work with
> vigor 318 modem.
>
> The modem shows up in /proc/bus/usb/devices.
>
> cat /proc/net/atm/cxacru\:0 :
> ADSL USB MODEM (usb-0000:00:0a.0-1)
> MAC: 00:50:7f:18:75:6e
> AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop )
> Line up
>
> Leds light up correctly.
>
> Running pppd gets as far as:
>
> Connect: ppp0 <--> /dev/pts/0
> Connection terminated
> Modem hangup
> Exit
>
> The message in syslog is LCP: timeout sending Config-Requests
>
> It seems I am not getting an IP address (dynamic).
>
> According to my ISP, no username or password are required;
> authentication is apparently done by phone number.
>
> Does anybody have any idea where I go from here? Or what I should put in
> my ppp/options?
>
> TIA,
>
> Andrew
Greetings: Can't help with pppoa but I got pppoe working with much
doco reading and considerable help from Ray and Chuck on this list..
I have the file: DSL-HOWTO.pdf > 200K, that goes into all DSL formats
including pppoa.. It may give you some clues, finding it via google,
by Hal Burgiss, hal@foobar.net; v1.71 2002-07-21... HTH..
--
Hal - in Terra Alta, WV/US - Slackware GNU/Linux 10.1 (2.4.29)
.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-12-31 18:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-12-30 19:57 adsl pppoa connection Andrew
2005-12-31 18:08 ` Hal MacArgle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox