RaLink rt2500 wireless local area network

RaLink rt2500 wireless local area network

[Tommi Tapani Piirainen]

Hello,

I have tried to install modules for rt2500 some time now with rt2500 or rt2x00 
module. I have managed to compile the module and install it, but after loading 
the module with insmod error occure "-1, File don't exist" some thing like 
that. Modprobe though don't give error and I can see module loaded with lsmod, 
but iwconfig don't show any wireless devices:( 

Error loading the module can be generic, because I can't load other modules I 
compile eather. So if some one can help me with procedure neccessary to install 
modules?

Now I have tried to compile the module and then install it and load it with 
modprobe or insmod.

#make 
#make install
#insmod $module

Where the $module is a name for the module installed.

give error "-1, File don't exist"

#emerge net-wireless/rt2500
#insmod $module 

don't work, same error "-1, File don't exist"

Some times compiling give me errors other times not, I am confused. Error is 
usually "RT2500_DBG not set" if I can remember right. Any suggestions?

I am tried to install the module too long so I will try use windows drivers if 
I don't manage to use rt2x00. Is this right way to go?

I currently change my operating system to Gentoo and I'm not really familiar 
with it:( My recent compiled kernel is (gentoo-sources) 2.6.16-r7. 

I have pcmcia and amateur radio compiled in the kernel.

-- 
*********************
tommi.piirainen@tkk.fi
**********************
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Re: RaLink rt2500 wireless local area network

[chuck gelm]

Tommi Tapani Piirainen wrote:

>Hello,
>
>I have tried to install modules for rt2500 some time now with rt2500 or rt2x00 
>module. I have managed to compile the module and install it, but after loading 
>the module with insmod error occure "-1, File don't exist" some thing like 
>that. Modprobe though don't give error and I can see module loaded with lsmod, 
>but iwconfig don't show any wireless devices:( 
>
>Error loading the module can be generic, because I can't load other modules I 
>compile eather. So if some one can help me with procedure neccessary to install 
>modules?
>
>Now I have tried to compile the module and then install it and load it with 
>modprobe or insmod.
>
>#make 
>#make install
>#insmod $module
>
>Where the $module is a name for the module installed.
>
>give error "-1, File don't exist"
>
>#emerge net-wireless/rt2500
>#insmod $module 
>
>don't work, same error "-1, File don't exist"
>
>Some times compiling give me errors other times not, I am confused. Error is 
>usually "RT2500_DBG not set" if I can remember right. Any suggestions?
>
>I am tried to install the module too long so I will try use windows drivers if 
>I don't manage to use rt2x00. Is this right way to go?
>
>I currently change my operating system to Gentoo and I'm not really familiar 
>with it:( My recent compiled kernel is (gentoo-sources) 2.6.16-r7. 
>
>I have pcmcia and amateur radio compiled in the kernel.
>
>  
>
Hi, Tommi:

 Please always give the exact command and the exact error message.
I 'googled' and found some comments about problems with using rt2500 
module(s).
Probably, you should mention your linux distribution (with version) and 
kernel (2.?.?).
I see where someone was having a problem with ndiswrapper and a rt2500 
device
notbeing able to specify 'b/g' [802.11b/802.11g].

 The wireless device in my laptop is a Broadcom 94306 and I got it to 
work by using
ndiswrapper.  If you try ndiswrapper, perhaps my setup will be similar 
to yours:
http://gelm.net/2005/zv5410us/wireless.html

"-1, File don't exist"

 Did you run 'depmod -a' after installing the module?  
Is the module where your kernel expects to find it?
 (where the other modules are)
My system runs 'depmod -a' with every boot.

 I am not familiar with the command 'emerge'. :-|

 In your example "#insmod $module", we do not know, for sure, what '$module' is equal to. !?!
Please specify module name in command line.

 'insmod' does not assume any parameters, perhaps you need some parameters or arguments 
in the 'insmod' command line.

 'modprobe' will try to assume some parameters or arguments and if it assumes correctly
all is well.

 However, you mention:
"Error loading the module can be generic, because I can't load other modules I 
compile eather. So if some one can help me with procedure neccessary to install 
modules?"

 Yes, Show us how, exactly, you are trying to load modules and
the exact error messages.

Which distribution and kernel?
Which module version and source ?  (http://download.blahblah.org/pub/rt2500-2.1.23.tar.gz)

Perhaps some messages are appearing in /var/log/messages. Watch
 tail -f /var/log/messages
while you insert the device.

HTH, Chuck


-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Re: RaLink rt2500 wireless local area network SOLVED

[Tommi Tapani Piirainen]

On Mon, 29 May 2006 07:50:26 -0400 chuck gelm <chuck@gelm.net> wrote:

> Tommi Tapani Piirainen wrote:
> 
> >Hello,
> >
> >I have tried to install modules for rt2500 some time now with rt2500
> or rt2x00 
> >module. I have managed to compile the module and install it, but after
> loading 
> >the module with insmod error occure "-1, File don't exist" some thing
> like 
> >that. Modprobe though don't give error and I can see module loaded
> with lsmod, 
> >but iwconfig don't show any wireless devices:( 
> >
> >Error loading the module can be generic, because I can't load other
> modules I 
> >compile eather. So if some one can help me with procedure neccessary
> to install 
> >modules?
> >
> >Now I have tried to compile the module and then install it and load it
> with 
> >modprobe or insmod.
> >
> >#make 
> >#make install
> >#insmod $module
> >
> >Where the $module is a name for the module installed.
> >
> >give error "-1, File don't exist"
> >
> >#emerge net-wireless/rt2500
> >#insmod $module 
> >
> >don't work, same error "-1, File don't exist"
> >
> >Some times compiling give me errors other times not, I am confused.
> Error is 
> >usually "RT2500_DBG not set" if I can remember right. Any suggestions?
> >
> >I am tried to install the module too long so I will try use windows
> drivers if 
> >I don't manage to use rt2x00. Is this right way to go?
> >
> >I currently change my operating system to Gentoo and I'm not really
> familiar 
> >with it:( My recent compiled kernel is (gentoo-sources) 2.6.16-r7. 
> >
> >I have pcmcia and amateur radio compiled in the kernel.
> >
> >  
> >
> Hi, Tommi:
> 
>  Please always give the exact command and the exact error message.
> I 'googled' and found some comments about problems with using rt2500 
> module(s).
> Probably, you should mention your linux distribution (with version) and
> 
> kernel (2.?.?).
> I see where someone was having a problem with ndiswrapper and a rt2500 
> device
> notbeing able to specify 'b/g' [802.11b/802.11g].
> 
>  The wireless device in my laptop is a Broadcom 94306 and I got it to 
> work by using
> ndiswrapper.  If you try ndiswrapper, perhaps my setup will be similar 
> to yours:
> http://gelm.net/2005/zv5410us/wireless.html
> 
> "-1, File don't exist"
> 
>  Did you run 'depmod -a' after installing the module?  
> Is the module where your kernel expects to find it?
>  (where the other modules are)
> My system runs 'depmod -a' with every boot.
> 
>  I am not familiar with the command 'emerge'. :-|
> 
>  In your example "#insmod $module", we do not know, for sure, what
> '$module' is equal to. !?!
> Please specify module name in command line.
> 
>  'insmod' does not assume any parameters, perhaps you need some
> parameters or arguments 
> in the 'insmod' command line.
> 
>  'modprobe' will try to assume some parameters or arguments and if it
> assumes correctly
> all is well.
> 
>  However, you mention:
> "Error loading the module can be generic, because I can't load other
> modules I 
> compile eather. So if some one can help me with procedure neccessary to
> install 
> modules?"
> 
>  Yes, Show us how, exactly, you are trying to load modules and
> the exact error messages.
> 
> Which distribution and kernel?
> Which module version and source ? 
> (http://download.blahblah.org/pub/rt2500-2.1.23.tar.gz)
> 
> Perhaps some messages are appearing in /var/log/messages. Watch
>  tail -f /var/log/messages
> while you insert the device.
> 
> HTH, Chuck
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-newbie"
> in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.linux-learn.org/faqs
> 

Hi, 

I just wanted to reply that I solved the problem. Actually my chip was rt61. So 
I downloaded drivers from the ralink site "http://www.ralinktech.com/supp-
1.htm" and compiled it. I got few warnings during compilation and I get warning 
when I load the module, but it seems to work:)

-- 
******
Tommi 
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs