From: ali shahrokni <shahrokni@gmail.com>
To: linux-newbie@vger.kernel.org
Subject: Firewire camera and PCMCIA card under Debian
Date: Mon, 11 Sep 2006 17:37:06 +0100 [thread overview]
Message-ID: <450590B2.4000809@laposte.net> (raw)
Hello,
I am trying to connect a unibrain firewire camera to my T40 thinkpad
using a PCMCIA firecard. I am running debian testing and kernel 2.6.15.
The card is detected and the output of dmeg follows but the camera
doesn't even turn on and nothing happens when I connect it to the card!
Any help would be greatly appreciated.
Cheers,
Ali
ieee1394: raw1394: /dev/raw1394 device initialized
video1394: Installed video1394 module
usb 2-2: new full speed USB device using uhci_hcd and address 3
pccard: card ejected from slot 1
ieee1394: Node removed: ID:BUS[0-00:1023] GUID[0814435800000528]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
pccard: CardBus card inserted into slot 1
PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKB] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:07:00.0 to 64
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]
MMIO=[c4004000-c40047ff] Max Packet=[2048]
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0814435800000528]
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
next reply other threads:[~2006-09-11 16:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-11 16:37 ali shahrokni [this message]
2006-09-12 6:41 ` Firewire camera and PCMCIA card under Debian Ray Olszewski
[not found] <4505910C.8030505@laposte.net>
2006-09-11 16:39 ` ali shahrokni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=450590B2.4000809@laposte.net \
--to=shahrokni@gmail.com \
--cc=linux-newbie@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox