From: Ole Martin Handeland <oli@oasenlan.com>
To: linux-newbie@vger.kernel.org
Subject: RTL network card problem
Date: Tue, 21 Sep 2004 17:54:34 +0200 [thread overview]
Message-ID: <cipis0$jcg$1@sea.gmane.org> (raw)
Hi,
When i just inserted this second network card my redhat network config
shows this:
Desc. Type Device Status
RTL-8139/8139C/8139C+ Ethernet eth0 ok
RTL-8139/8139C/8139C+ Unknown dev22193 ok
Yes, i have two pci slots with two identical cards in.
ifconfig shows this:
dev22193 Link encap:Ethernet HWaddr 00:E0:4C:39:32:3F
inet addr:192.168.0.5 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::2e0:4cff:fe39:323f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:55 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:7474 (7.2 Kb)
Interrupt:10 Base address:0xc000
eth0 Link encap:Ethernet HWaddr 00:10:A7:13:CB:0D
inet addr:192.168.1.101 Bcast:192.168.1.255
Mask:255.255.255.0
inet6 addr: fe80::210:a7ff:fe13:cb0d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:108 errors:0 dropped:0 overruns:0 frame:0
TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16616 (16.2 Kb) TX bytes:4623 (4.5 Kb)
Interrupt:11 Base address:0xc400
So, my question is: why is this network card just partially found? my
kudzu found it, i configured it, and it dont work...?
System: 700mhz celeron, 256mb ram, fedora core 2, and, as you see, one
and a half network cards...
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
next reply other threads:[~2004-09-21 15:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-21 15:54 Ole Martin Handeland [this message]
2004-09-21 23:43 ` RTL network card problem chuck gelm
2004-09-22 15:21 ` Ole Martin Handeland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='cipis0$jcg$1@sea.gmane.org' \
--to=oli@oasenlan.com \
--cc=linux-newbie@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox