* linux-next: perfmon3 tree removed
From: Stephen Rothwell @ 2008-12-19 0:20 UTC (permalink / raw)
To: stephane eranian; +Cc: linux-next, Thomas Gleixner, Ingo Molnar
[-- Attachment #1: Type: text/plain, Size: 275 bytes --]
Hi Stephane,
Due to ongoing discussions and development, I have removed perfmon3 from
linux-next. This should be revisited when things settle back down again.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* Re: linux-next: Tree for December 18 (irq.h documentation)
From: Yinghai Lu @ 2008-12-19 0:33 UTC (permalink / raw)
To: Randy Dunlap, Ingo Molnar; +Cc: Stephen Rothwell, linux-next, LKML
In-Reply-To: <20081218155709.bf435d8c.randy.dunlap@oracle.com>
Randy Dunlap wrote:
> Hi YH,
>
> Whenever you update a struct in a header file that uses kernel-doc,
> like struct irq_desc in include/linux/irq.h, please also update the
> corresponding kernel-doc notation for the new struct members, so
> that kernel-doc warnings are not caused:
>
> from linux-next-20081218:
>
> Warning(linux-next-20081218//include/linux/irq.h:192): No description found for parameter 'timer_rand_state'
> Warning(linux-next-20081218//include/linux/irq.h:192): No description found for parameter 'kstat_irqs'
> Warning(linux-next-20081218//include/linux/irq.h:192): No description found for parameter 'irq_2_iommu'
>
>
please check
[PATCH] sparseirq: add kernel-doc notation for new member in irq_desc
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 1beb63a..4675682 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -135,6 +135,9 @@ struct irq_2_iommu;
/**
* struct irq_desc - interrupt descriptor
* @irq: interrupt number for this descriptor
+ * @timer_rand_state pointer to timer rand state struct
+ * @kstat_irqs irq stats per cpu
+ * @irq_2_iommu iommu with this irq
* @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()]
* @chip: low level interrupt hardware access
* @msi_desc: MSI descriptor
^ permalink raw reply related
* Re: linux-next: Tree for December 18 (irq.h documentation)
From: Randy Dunlap @ 2008-12-19 0:45 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Ingo Molnar, Stephen Rothwell, linux-next, LKML
In-Reply-To: <494AEBCA.70108@kernel.org>
Yinghai Lu wrote:
> Randy Dunlap wrote:
>> Hi YH,
>>
>> Whenever you update a struct in a header file that uses kernel-doc,
>> like struct irq_desc in include/linux/irq.h, please also update the
>> corresponding kernel-doc notation for the new struct members, so
>> that kernel-doc warnings are not caused:
>>
>> from linux-next-20081218:
>>
>> Warning(linux-next-20081218//include/linux/irq.h:192): No description found for parameter 'timer_rand_state'
>> Warning(linux-next-20081218//include/linux/irq.h:192): No description found for parameter 'kstat_irqs'
>> Warning(linux-next-20081218//include/linux/irq.h:192): No description found for parameter 'irq_2_iommu'
>>
>>
> please check
Thanks. Please see below.
> [PATCH] sparseirq: add kernel-doc notation for new member in irq_desc
>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>
> diff --git a/include/linux/irq.h b/include/linux/irq.h
> index 1beb63a..4675682 100644
> --- a/include/linux/irq.h
> +++ b/include/linux/irq.h
> @@ -135,6 +135,9 @@ struct irq_2_iommu;
> /**
> * struct irq_desc - interrupt descriptor
> * @irq: interrupt number for this descriptor
> + * @timer_rand_state pointer to timer rand state struct
> + * @kstat_irqs irq stats per cpu
> + * @irq_2_iommu iommu with this irq
Format is:
* @member: description
I.e., please add a ':' after each member name.
> * @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()]
> * @chip: low level interrupt hardware access
> * @msi_desc: MSI descriptor
--
~Randy
^ permalink raw reply
* Re: linux-next: Tree for December 18 (irq.h documentation)
From: Yinghai Lu @ 2008-12-19 0:57 UTC (permalink / raw)
To: Randy Dunlap, Ingo Molnar; +Cc: Stephen Rothwell, linux-next, LKML
In-Reply-To: <494AEBCA.70108@kernel.org>
please check
[PATCH] sparseirq: add kernel-doc notation for new member in irq_desc -v2
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 1beb63a..5845bdc 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -135,6 +135,9 @@ struct irq_2_iommu;
/**
* struct irq_desc - interrupt descriptor
* @irq: interrupt number for this descriptor
+ * @timer_rand_state: pointer to timer rand state struct
+ * @kstat_irqs: irq stats per cpu
+ * @irq_2_iommu: iommu with this irq
* @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()]
* @chip: low level interrupt hardware access
* @msi_desc: MSI descriptor
^ permalink raw reply related
* Re: linux-next: Tree for December 18 (irq.h documentation)
From: Randy Dunlap @ 2008-12-19 1:00 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Ingo Molnar, Stephen Rothwell, linux-next, LKML
In-Reply-To: <494AF190.6000801@kernel.org>
Yinghai Lu wrote:
> please check
>
> [PATCH] sparseirq: add kernel-doc notation for new member in irq_desc -v2
>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Thanks.
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
> diff --git a/include/linux/irq.h b/include/linux/irq.h
> index 1beb63a..5845bdc 100644
> --- a/include/linux/irq.h
> +++ b/include/linux/irq.h
> @@ -135,6 +135,9 @@ struct irq_2_iommu;
> /**
> * struct irq_desc - interrupt descriptor
> * @irq: interrupt number for this descriptor
> + * @timer_rand_state: pointer to timer rand state struct
> + * @kstat_irqs: irq stats per cpu
> + * @irq_2_iommu: iommu with this irq
> * @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()]
> * @chip: low level interrupt hardware access
> * @msi_desc: MSI descriptor
>
--
~Randy
^ permalink raw reply
* Re: linux-next: Tree for December 18 (patch: kernel-doc notation)
From: Dave Chinner @ 2008-12-19 10:39 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Stephen Rothwell, linux-next, LKML, akpm
In-Reply-To: <20081218161437.fe2d2675.randy.dunlap@oracle.com>
On Thu, Dec 18, 2008 at 04:14:37PM -0800, Randy Dunlap wrote:
> fs/inode.c and mm/filemap.c need kernel-doc fixes.
>
> What tree were these merged into for linux-next?
The fs/inode.c one ended up going through the XFS tree because
of the XFs code dependent on it....
> How do I get these doc fixes merged? (2 patches below)
Perhaps best to go through the VFS tree for fs/inode.c changes.
> ---
>
> From: Randy Dunlap <randy.dunlap@oracle.com>
>
> Fix fs/inode.c kernel-doc function parameters:
>
> Warning(linux-next-20081218//fs/inode.c:120): No description found for parameter 'sb'
> Warning(linux-next-20081218//fs/inode.c:120): No description found for parameter 'inode'
> Warning(linux-next-20081218//fs/inode.c:588): No description found for parameter 'sb'
> Warning(linux-next-20081218//fs/inode.c:588): No description found for parameter 'inode'
>
> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
> cc: Dave Chinner <david@fromorbit.com>
Looks fine to me.
Reviewed-by: Dave Chinner <david@fromorbit.com>
Cheers,
Dave.
--
Dave Chinner
david@fromorbit.com
^ permalink raw reply
* [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask
From: Kamalesh Babulal @ 2008-12-19 10:54 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, LKML, mingo, yinghai, mel
In-Reply-To: <20081216223754.0c8e21d4.sfr@canb.auug.org.au>
Hi,
next-200816 kernel panics, while boot up on x86_64 machine.
Initializing CPU#0
BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
IP: [<ffffffff80700449>] init_ISA_irqs+0x18/0x53
PGD 0
Oops: 0002 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.28-rc7-autotest #1
RIP: 0010:[<ffffffff80700449>] [<ffffffff80700449>] init_ISA_irqs+0x18/0x53
RSP: 0018:ffffffff806f1f68 EFLAGS: 00010093
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff80766940
RDX: 0000000000000100 RSI: 0000000000000096 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff8800808b0000 R09: 0000000000000000
R10: ffff880001012c80 R11: ffffffff80349d00 R12: 0000000000000000
R13: ffffffff80727240 R14: ffffffff80729a80 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff806e2480(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000048 CR3: 0000000000201000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffffffff806f0000, task ffffffff806713a0)
Stack:
0000000000000003 ffffffff8070048d ffffffff806d4ea0 ffffffff804ff724
0000000000000003 ffffffff806f9b23 0000000000000000 00000000007e0c30
ffffffff80729a80 0000000000093350 0000000000000000 0000000000000000
Call Trace:
[<ffffffff8070048d>] native_init_IRQ+0x9/0x931
[<ffffffff804ff724>] register_cpu_notifier+0x1f/0x23
[<ffffffff806f9b23>] start_kernel+0x1bd/0x318
[<ffffffff806f938f>] x86_64_start_kernel+0xde/0xe2
Code: 85 c0 75 0d 59 48 c7 c7 20 2f 67 80 e9 15 d5 cb ff 5a c3 53 31 db e8 ec 86 00 00 31 ff e8 46 ee b0 ff 89 df e8 ce 4e b6 ff 89 df <c7> 40 48 00 02 00 00 48 c7 40 40 00 00 00 00 c7 40 4c 01 00 00
RIP [<ffffffff80700449>] init_ISA_irqs+0x18/0x53
RSP <ffffffff806f1f68>
CR2: 0000000000000048
---[ end trace 4eaa2a86a8e2da22 ]---
Kernel panic - not syncing: Attempted to kill the idle task!
------------[ cut here ]------------
WARNING: at kernel/smp.c:333 smp_call_function_mask+0x32/0x229()
Modules linked in:
Pid: 0, comm: swapper Tainted: G D 2.6.28-rc7-autotest #1
Call Trace:
[<ffffffff80237267>] warn_on_slowpath+0x51/0x6d
[<ffffffff80257069>] kallsyms_lookup+0x49/0x80
[<ffffffff80700449>] init_ISA_irqs+0x18/0x53
[<ffffffff80700449>] init_ISA_irqs+0x18/0x53
[<ffffffff8024ba92>] up+0xe/0x36
[<ffffffff80237935>] release_console_sem+0x18a/0x1a5
[<ffffffff80252f8f>] smp_call_function_mask+0x32/0x229
[<ffffffff80516059>] _spin_lock_irqsave+0x9/0xe
[<ffffffff8039a34f>] mix_pool_bytes_extract+0x5c/0x155
[<ffffffff80237ea1>] printk+0x4e/0x56
[<ffffffff80258d89>] crash_kexec+0xe6/0xef
[<ffffffff802531b0>] smp_call_function+0x2a/0x2f
[<ffffffff8021cdba>] native_smp_send_stop+0x1a/0x26
[<ffffffff80237322>] panic+0x95/0x13f
[<ffffffff80237ea1>] printk+0x4e/0x56
[<ffffffff80239c4f>] do_exit+0x71/0x781
[<ffffffff80516be1>] oops_begin+0x0/0x8d
[<ffffffff805184c9>] do_page_fault+0x72c/0x7e5
[<ffffffff80516199>] error_exit+0x0/0x51
[<ffffffff80349d00>] delay_loop+0x0/0x29
[<ffffffff80700449>] init_ISA_irqs+0x18/0x53
[<ffffffff80700447>] init_ISA_irqs+0x16/0x53
[<ffffffff8070048d>] native_init_IRQ+0x9/0x931
[<ffffffff804ff724>] register_cpu_notifier+0x1f/0x23
[<ffffffff806f9b23>] start_kernel+0x1bd/0x318
[<ffffffff806f938f>] x86_64_start_kernel+0xde/0xe2
---[ end trace 4eaa2a86a8e2da22 ]---
git-bisect start
# good: [8b1fae4e4200388b64dd88065639413cb3f1051c] Linux 2.6.28-rc8
git-bisect good 8b1fae4e4200388b64dd88065639413cb3f1051c
# bad: [2c5aeead3f33fe8cb92b2ba78f9808149e2a67b6] Add linux-next specific files for 20081216
git-bisect bad 2c5aeead3f33fe8cb92b2ba78f9808149e2a67b6
# bad: [0c9de092b4d35d2352b6bdad4dabe329ae26baa1] Merge commit 'kvm/master'
git-bisect bad 0c9de092b4d35d2352b6bdad4dabe329ae26baa1
# bad: [d762bf4f9299644385149e860378569fb8da5a44] Merge commit 'acpi/test'
git-bisect bad d762bf4f9299644385149e860378569fb8da5a44
# good: [ff7f8bd0fdbada0a12c9b252cc08eac4e88d6d8e] Merge branch 'quilt/driver-core'
git-bisect good ff7f8bd0fdbada0a12c9b252cc08eac4e88d6d8e
# bad: [36046a54cc8a010d0e2e10f08a7deb0b6fd6a55d] Merge commit 'safe-poison-pointers/auto-safe-poison-pointers-next'
git-bisect bad 36046a54cc8a010d0e2e10f08a7deb0b6fd6a55d
# good: [e76bd8d9850c2296a7e8e24c9dce9b5e6b55fe2f] sched: avoid stack var in move_task_off_dead_cpu
git-bisect good e76bd8d9850c2296a7e8e24c9dce9b5e6b55fe2f
# bad: [71007b38ab0295e93697d0dd6dff1db1b8c42854] Merge branch 'cpus4096' into auto-cpus4096-next
git-bisect bad 71007b38ab0295e93697d0dd6dff1db1b8c42854
# good: [b29144c317fb748dae6d72c0f88eda9d43165b8d] Merge branches 'tracing/ftrace' and 'tracing/function-graph-tracer' into tracing/core
git-bisect good b29144c317fb748dae6d72c0f88eda9d43165b8d
# good: [da485e0cb16726797e99a595a399b9fc721b91bc] tracing/fastboot: include missing headers
git-bisect good da485e0cb16726797e99a595a399b9fc721b91bc
# good: [81444a799550214f549caf579cf65a0ca55e70b7] Merge branch 'tracing/fastboot' into cpus4096
git-bisect good 81444a799550214f549caf579cf65a0ca55e70b7
# good: [45ab6b0c76d0e4cce5bd608ccf97b0f6b20f18df] Merge branch 'sched/core' into cpus4096
git-bisect good 45ab6b0c76d0e4cce5bd608ccf97b0f6b20f18df
# bad: [50dd94e017ec39f85c26b6c10ed9fb2d7a7d8042] sparseirq: fix typo in !CONFIG_IO_APIC case
git-bisect bad 50dd94e017ec39f85c26b6c10ed9fb2d7a7d8042
# bad: [99d093d12897562a253540a902bbf65ec16042ac] x86: use NR_IRQS_LEGACY
git-bisect bad 99d093d12897562a253540a902bbf65ec16042ac
# bad: [0b8f1efad30bd58f89961b82dfe68b9edf8fd2ac] sparse irq_desc[] array: core kernel and x86 changes
git-bisect bad 0b8f1efad30bd58f89961b82dfe68b9edf8fd2ac
The git-bisect points to below commit
commit 0b8f1efad30bd58f89961b82dfe68b9edf8fd2ac
Author: Yinghai Lu <yinghai@kernel.org>
Date: Fri Dec 5 18:58:31 2008 -0800
sparse irq_desc[] array: core kernel and x86 changes
Impact: new feature
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
^ permalink raw reply
* Re: [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask
From: Yinghai Lu @ 2008-12-19 11:51 UTC (permalink / raw)
To: Kamalesh Babulal; +Cc: Stephen Rothwell, linux-next, LKML, mingo, mel
In-Reply-To: <20081219105441.GA19750@linux.vnet.ibm.com>
On Fri, Dec 19, 2008 at 2:54 AM, Kamalesh Babulal
<kamalesh@linux.vnet.ibm.com> wrote:
> Hi,
>
> next-200816 kernel panics, while boot up on x86_64 machine.
>
> Initializing CPU#0
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
> IP: [<ffffffff80700449>] init_ISA_irqs+0x18/0x53
.config and good boot log?
YH
^ permalink raw reply
* linux-next: Tree for December 19
From: Stephen Rothwell @ 2008-12-19 12:57 UTC (permalink / raw)
To: linux-next; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 8379 bytes --]
Hi all,
Changes since 20081218:
Removed trees:
perfmon3
fscache
Undropped tree:
rr
Dropped trees (temporarily):
scsi (build problem)
mtd (build problems)
kvm (build problem)
semaphore-removal (due to unfixed conflicts against Linus' tree)
cpu_alloc (build problem)
audit (difficult conflicts)
The rr_cpumask tree lost its conflicts (one was tansferred to the rr
tree).
----------------------------------------------------------------------------
I have created today's linux-next tree at
git://git.kernel.org/pub/scm/linux/kernel/git/sfr/linux-next.git
(patches at
http://www.kernel.org/pub/linux/kernel/people/sfr/linux-next/). If you
are tracking the linux-next tree using git, you should not use "git pull"
to do so as that will try to merge the new linux-next release with the
old one. You should use "git fetch" as mentioned in the FAQ on the wiki
(see below).
You can see which trees have been included by looking in the Next/Trees
file in the source. There are also quilt-import.log and merge.log files
in the Next directory. Between each merge, the tree was built with
a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the
final fixups (if any), it is also built with powerpc allnoconfig,
44x_defconfig and allyesconfig (minus CONFIG_PROFILE_ALL_BRANCHES) and
i386, sparc and sparc64 defconfig.
Below is a summary of the state of the merge.
We are up to 132 trees (counting Linus' and 15 trees of patches pending for
Linus' tree), more are welcome (even if they are currently empty).
Thanks to those who have contributed, and to those who haven't, please do.
Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give
advice about cross compilers/configs that work, we are always open to add
more builds.
Thanks to Jan Dittmer for adding the linux-next tree to his build tests
at http://l4x.org/k/ , the guys at http://test.kernel.org/ and Randy
Dunlap for doing many randconfig builds.
There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
$ git checkout master
$ git reset --hard stable
Merging origin/master
Merging arm-current/master
Merging m68k-current/for-linus
Merging powerpc-merge/merge
Merging sparc-current/master
Merging scsi-rc-fixes/master
Merging net-current/master
Merging sound-current/for-linus
Merging pci-current/for-linus
Merging wireless-current/master
Merging kbuild-current/master
Merging quilt/driver-core.current
Merging quilt/usb.current
Merging cpufreq-current/fixes
Merging input-current/for-linus
Merging md-current/for-2.6.26
Merging audit-current/for-linus
Merging dwmw2/master
Merging arm/devel
Merging avr32/avr32-arch
Merging blackfin/for-linus
Merging cris/for-next
Merging ia64/test
Merging m68k/for-next
Merging m68knommu/for-next
Merging mips/mips-for-linux-next
Merging parisc/master
Merging powerpc/next
Merging 4xx/next
Merging galak/next
Merging pxa/for-next
Merging s390/features
CONFLICT (content): Merge conflict in drivers/char/Makefile
Merging sh/master
Merging sparc/master
Merging x86/auto-x86-next
Merging xtensa/master
Merging quilt/driver-core
CONFLICT (content): Merge conflict in arch/powerpc/platforms/85xx/mpc85xx_mds.c
Merging quilt/usb
Merging tip-core/auto-core-next
Merging cpus4096/auto-cpus4096-next
CONFLICT (content): Merge conflict in scripts/recordmcount.pl
Merging ftrace/auto-ftrace-next
Merging genirq/auto-genirq-next
Merging safe-poison-pointers/auto-safe-poison-pointers-next
Merging sched/auto-sched-next
Merging stackprotector/auto-stackprotector-next
Merging timers/auto-timers-next
Merging pci/linux-next
Merging quilt/device-mapper
CONFLICT (content): Merge conflict in drivers/md/dm.c
Merging hid/for-next
Merging quilt/i2c
Merging quilt/jdelvare-hwmon
Merging quilt/kernel-doc
Merging v4l-dvb/master
Merging jfs/next
Merging kbuild/master
Merging quilt/ide
Merging libata/NEXT
Merging nfs/linux-next
Merging xfs/master
CONFLICT (content): Merge conflict in fs/xfs/xfs_rename.c
Merging infiniband/for-next
Merging acpi/test
Merging nfsd/nfsd-next
Merging ieee1394/for-next
Merging ubi/linux-next
Merging dlm/next
Merging ocfs2/linux-next
Merging ext4/next
Merging async_tx/next
Merging udf/for_next
Merging net/master
CONFLICT (delete/modify): arch/sparc64/kernel/idprom.c deleted in HEAD and modified in net/master. Version net/master of arch/sparc64/kernel/idprom.c left in tree.
CONFLICT (content): Merge conflict in fs/lockd/host.c
CONFLICT (content): Merge conflict in fs/lockd/mon.c
$ git rm -f arch/sparc64/kernel/idprom.c
Applying: net: async_tx merge fix
Merging wireless/master
Merging crypto/master
Merging vfs/for-next
Merging sound/for-next
Merging cpufreq/next
Merging v9fs/for-next
Merging rr_cpumask/master
Merging quilt/rr
CONFLICT (content): Merge conflict in kernel/sched.c
Merging cifs/master
CONFLICT (content): Merge conflict in fs/cifs/connect.c
Applying: cifs: update for new IP4/6 address printing
Merging mmc/next
Merging gfs2/master
Merging input/next
Merging semaphore/semaphore
Merging bkl-removal/bkl-removal
CONFLICT (content): Merge conflict in fs/ioctl.c
Merging ubifs/linux-next
Merging lsm/for-next
Merging block/for-next
CONFLICT (content): Merge conflict in fs/bio.c
Merging embedded/master
Merging firmware/master
CONFLICT (content): Merge conflict in drivers/net/tg3.c
CONFLICT (content): Merge conflict in firmware/Makefile
CONFLICT (content): Merge conflict in firmware/WHENCE
Merging pcmcia/master
Merging battery/master
Merging leds/for-mm
Merging backlight/for-mm
Merging kgdb/kgdb-next
Merging slab/for-next
Merging uclinux/for-next
Merging md/for-next
Merging kmemcheck/auto-kmemcheck-next
CONFLICT (content): Merge conflict in MAINTAINERS
CONFLICT (content): Merge conflict in arch/x86/mm/Makefile
CONFLICT (content): Merge conflict in mm/slab.c
CONFLICT (content): Merge conflict in mm/slub.c
Merging generic-ipi/auto-generic-ipi-next
Merging mfd/for-next
Merging hdlc/hdlc-next
Merging drm/drm-next
Merging voltage/for-next
Merging security-testing/next
CONFLICT (content): Merge conflict in drivers/char/tty_audit.c
CONFLICT (content): Merge conflict in fs/cifs/cifs_fs_sb.h
CONFLICT (content): Merge conflict in fs/ocfs2/namei.c
CONFLICT (content): Merge conflict in fs/xfs/linux-2.6/xfs_cred.h
CONFLICT (content): Merge conflict in fs/xfs/linux-2.6/xfs_globals.h
CONFLICT (content): Merge conflict in fs/xfs/linux-2.6/xfs_ioctl.c
CONFLICT (content): Merge conflict in fs/xfs/xfs_vnodeops.h
Merging lblnet/master
CONFLICT (content): Merge conflict in Documentation/feature-removal-schedule.txt
Merging quilt/ttydev
CONFLICT (content): Merge conflict in fs/devpts/inode.c
Merging agp/agp-next
Merging oprofile/auto-oprofile-next
Merging fastboot/auto-fastboot-next
Merging sparseirq/auto-sparseirq-next
Merging iommu/auto-iommu-next
Merging uwb/for-upstream
Merging watchdog/master
Merging proc/proc
Merging bdev/master
Merging dwmw2-iommu/master
Merging cputime/cputime
CONFLICT (content): Merge conflict in kernel/sched.c
Merging osd/linux-next
Merging fatfs/master
Merging fuse/for-next
Merging jc_docs/docs-next
Merging nommu/master
CONFLICT (content): Merge conflict in Documentation/sysctl/vm.txt
CONFLICT (content): Merge conflict in kernel/fork.c
Merging boot-params/master
CONFLICT (content): Merge conflict in arch/arm/kernel/setup.c
CONFLICT (content): Merge conflict in arch/parisc/kernel/setup.c
CONFLICT (content): Merge conflict in arch/sh/boards/mach-microdev/setup.c
CONFLICT (content): Merge conflict in arch/sh/boards/mach-migor/setup.c
CONFLICT (content): Merge conflict in init/main.c
Merging trivial/for-next
Merging quilt/staging
CONFLICT (delete/modify): drivers/staging/winbond/linux/wbusb.c deleted in quilt/staging and modified in HEAD. Version HEAD of drivers/staging/winbond/linux/wbusb.c left in tree.
CONFLICT (content): Merge conflict in drivers/staging/wlan-ng/p80211netdev.c
CONFLICT (content): Merge conflict in drivers/staging/wlan-ng/p80211wext.c
$ git rm -f drivers/staging/winbond/linux/wbusb.c
Merging scsi-post-merge/master
[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply
* Re: [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask
From: Kamalesh Babulal @ 2008-12-19 13:46 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Stephen Rothwell, linux-next, LKML, mingo, mel
In-Reply-To: <86802c440812190351q3118516aif664dd5869c21b2a@mail.gmail.com>
* Yinghai Lu <yinghai@kernel.org> [2008-12-19 03:51:53]:
> On Fri, Dec 19, 2008 at 2:54 AM, Kamalesh Babulal
> <kamalesh@linux.vnet.ibm.com> wrote:
> > Hi,
> >
> > next-200816 kernel panics, while boot up on x86_64 machine.
> >
> > Initializing CPU#0
> > BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
> > IP: [<ffffffff80700449>] init_ISA_irqs+0x18/0x53
>
> .config and good boot log?
>
> YH
Hi,
I am able to reproduce with next-20081218 kernel also, attaching the
bootlog and .config file of next-20081218 kernel
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-autotest root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 c
onsole=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=s
erial,ttyS1,19200 IDENT=1229689794
[Linux-bzImage, setup=0x3000, size=0x274e50]
initrd /initrd-autotest
[Linux-initrd @ 0x37e5f000, 0x190980 bytes]
Command line: root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 console=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=serial,ttyS1,19200 IDENT=1229689794
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffcddc0 (usable)
BIOS-e820: 000000003ffcddc0 - 000000003ffd0000 (ACPI data)
BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x3ffcd max_arch_pfn = 0x3ffffffff
init_memory_mapping: 0000000000000000-000000003ffcd000
0000000000 - 003fe00000 page 2M
003fe00000 - 003ffcd000 page 4k
kernel direct mapping tables up to 3ffcd000 @ 8000-b000
last_map_addr: 3ffcd000 end: 3ffcd000
RAMDISK: 37e5f000 - 37fef980
ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
ACPI: FACS 3FFCFCC0, 0040
ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 0-40000000
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000003ffcd000
NODE_DATA [0000000000009000 - 000000000000efff]
bootmap [000000000000f000 - 0000000000016fff] pages 8
(6 early reservations) ==> bootmem [0000000000 - 003ffcd000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 00008198b0] TEXT DATA BSS ==> [0000200000 - 00008198b0]
#3 [0037e5f000 - 0037fef980] RAMDISK ==> [0037e5f000 - 0037fef980]
#4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
#5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff88000009d540] 0009d540
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009d
0: 0x00000100 -> 0x0003ffcd
On node 0 totalpages: 261994
DMA zone: 64 pages used for memmap
DMA zone: 1665 pages reserved
DMA zone: 2268 pages, LIFO batch:0
DMA32 zone: 4032 pages used for memmap
DMA32 zone: 253965 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2208
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 0, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 13, version 0, address 0xfec10000, GSI 24-27
ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
IOAPIC[2]: apic_id 12, version 0, address 0xfec20000, GSI 48-51
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228203 base: 0xfecff000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
PERCPU: Allocating 49152 bytes of per cpu data
per cpu data for cpu0 on node0 at 000000000100e000
per cpu data for cpu1 on node0 at 000000000101a000
per cpu data for cpu2 on node0 at 0000000001026000
per cpu data for cpu3 on node0 at 0000000001032000
NR_CPUS: 255, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 256233
Policy zone: DMA32
Kernel command line: root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 console=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=serial,ttyS1,19200 IDENT=1229689794
Initializing CPU#0
BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
IP: [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
PGD 0
Thread overran stack, or stack corrupted
Oops: 0002 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.28-rc8-next-20081218-autotest #1
RIP: 0010:[<ffffffff80714479>] [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
RSP: 0018:ffffffff80705f88 EFLAGS: 00010093
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff80778a80
RDX: 0000000000000100 RSI: 0000000000000092 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff88008089e000 R09: 0000000000000000
R10: ffff880001012c60 R11: ffffffff803560a0 R12: ffff88000103e040
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff806f73c0(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000048 CR3: 0000000000201000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffffffff80704000, task ffffffff806843a0)
Stack:
ffffffff8073b560 ffffffff807144bd ffffffff806e8f40 ffffffff8050e772
ffffffff8073b560 ffffffff8070daf6 0000000000000000 0000000000093370
0000000000000000 ffffffff8070d394 80708e000010d136 00000000ffffffff
Call Trace:
[<ffffffff807144bd>] native_init_IRQ+0x9/0x931
[<ffffffff8050e772>] register_cpu_notifier+0x1f/0x23
[<ffffffff8070daf6>] start_kernel+0x1a8/0x319
[<ffffffff8070d394>] x86_64_start_kernel+0xde/0xe2
Code: 85 c0 75 0d 59 48 c7 c7 20 5f 68 80 e9 65 74 cb ff 5a c3 53 31 db e8 ba 85 00 00 31 ff e8 52 ad af ff 89 df e8 6a 12 b5 ff 89 df <c7> 40 48 00 02 00 00 48 c7 40 40 00 00 00 00 c7 40 4c 01 00 00
RIP [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
RSP <ffffffff80705f88>
CR2: 0000000000000048
---[ end trace 4eaa2a86a8e2da22 ]---
Kernel panic - not syncing: Attempted to kill the idle task!
Pid: 0, comm: swapper Tainted: G D 2.6.28-rc8-next-20081218-autotest #1
Call Trace:
[<ffffffff80235f0d>] panic+0x86/0x144
[<ffffffff80236aa1>] printk+0x4e/0x56
[<ffffffff80238bd9>] do_exit+0x75/0x770
[<ffffffff8052618e>] oops_end+0xa8/0xad
[<ffffffff8052799c>] do_page_fault+0x748/0x801
[<ffffffff8052579f>] page_fault+0x1f/0x30
[<ffffffff803560a0>] delay_loop+0x0/0x29
[<ffffffff80714479>] init_ISA_irqs+0x18/0x53
[<ffffffff80714477>] init_ISA_irqs+0x16/0x53
[<ffffffff807144bd>] native_init_IRQ+0x9/0x931
[<ffffffff8050e772>] register_cpu_notifier+0x1f/0x23
[<ffffffff8070daf6>] start_kernel+0x1a8/0x319
[<ffffffff8070d394>] x86_64_start_kernel+0xde/0xe2
------------[ cut here ]------------
WARNING: at kernel/smp.c:333 smp_call_function_mask+0x36/0x22d()
Hardware name: IBM eServer BladeCenter LS20 -[885055U]-
Modules linked in:
Pid: 0, comm: swapper Tainted: G D 2.6.28-rc8-next-20081218-autotest #1
Call Trace:
[<ffffffff80235e60>] warn_slowpath+0xd8/0xf5
[<ffffffff8024aa66>] up+0xe/0x37
[<ffffffff80236535>] release_console_sem+0x18a/0x1a5
[<ffffffff805255d1>] _spin_lock_irqsave+0x9/0xe
[<ffffffff8024aa66>] up+0xe/0x37
[<ffffffff80211ca3>] stop_this_cpu+0x0/0x1d
[<ffffffff8070d394>] x86_64_start_kernel+0xde/0xe2
[<ffffffff8070d394>] x86_64_start_kernel+0xde/0xe2
[<ffffffff8070d394>] x86_64_start_kernel+0xde/0xe2
[<ffffffff80236aa1>] printk+0x4e/0x56
[<ffffffff80252a03>] smp_call_function_mask+0x36/0x22d
[<ffffffff8070d394>] x86_64_start_kernel+0xde/0xe2
[<ffffffff80236aa1>] printk+0x4e/0x56
[<ffffffff8034faca>] __next_cpu_nr+0x1a/0x21
[<ffffffff8021df10>] touch_nmi_watchdog+0x43/0x53
[<ffffffff8020f04d>] print_trace_address+0x1d/0x2d
[<ffffffff80245e5f>] __kernel_text_address+0x1a/0x26
[<ffffffff8020f11f>] print_context_stack+0x90/0xa6
[<ffffffff802589d9>] crash_kexec+0xe6/0xef
[<ffffffff8020e3b7>] dump_trace+0x249/0x258
[<ffffffff80252c24>] smp_call_function+0x2a/0x2f
[<ffffffff8021c9b1>] native_smp_send_stop+0x1a/0x26
[<ffffffff80235f21>] panic+0x9a/0x144
[<ffffffff80236aa1>] printk+0x4e/0x56
[<ffffffff80238bd9>] do_exit+0x75/0x770
[<ffffffff8052618e>] oops_end+0xa8/0xad
[<ffffffff8052799c>] do_page_fault+0x748/0x801
[<ffffffff8052579f>] page_fault+0x1f/0x30
[<ffffffff803560a0>] delay_loop+0x0/0x29
[<ffffffff80714479>] init_ISA_irqs+0x18/0x53
[<ffffffff80714477>] init_ISA_irqs+0x16/0x53
[<ffffffff807144bd>] native_init_IRQ+0x9/0x931
[<ffffffff8050e772>] register_cpu_notifier+0x1f/0x23
[<ffffffff8070daf6>] start_kernel+0x1a8/0x319
[<ffffffff8070d394>] x86_64_start_kernel+0xde/0xe2
---[ end trace 4eaa2a86a8e2da22 ]---
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc8-next-20081218
# Fri Dec 19 06:15:36 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_IBS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_64=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=255
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_WMI is not set
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NET_NS is not set
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_SECURITY is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
# CONFIG_BRIDGE_EBT_IP6 is not set
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
# CONFIG_NET_SCH_DRR is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
CONFIG_RFKILL=m
# CONFIG_RFKILL_INPUT is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
# CONFIG_MTD_DOC2001 is not set
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SGI_XP is not set
# CONFIG_HP_ILO is not set
# CONFIG_SGI_GRU is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
CONFIG_BLK_DEV_IT821X=y
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_NET_SB1000=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
# CONFIG_SMSC9420 is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_SC92031 is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKY2 is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=y
CONFIG_BNX2=m
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
# CONFIG_CHELSIO_T1_1G is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
CONFIG_IXGB=m
CONFIG_S2IO=m
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS is not set
CONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_STUB=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2760 is not set
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
CONFIG_SENSORS_W83781D=m
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_ADV7175=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
# CONFIG_VIDEO_ZORAN_ZR36060 is not set
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
# CONFIG_VIDEO_CX88_ALSA is not set
# CONFIG_VIDEO_CX88_BLACKBIRD is not set
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_ALSA is not set
# CONFIG_VIDEO_EM28XX_DVB is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m
# CONFIG_USB_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
# CONFIG_DVB_USB_DIB0700 is not set
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
# CONFIG_DVB_USB_M920X is not set
# CONFIG_DVB_USB_GL861 is not set
# CONFIG_DVB_USB_AU6610 is not set
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
# CONFIG_DVB_USB_GP8PSK is not set
CONFIG_DVB_USB_NOVA_T_USB2=m
# CONFIG_DVB_USB_TTUSB2 is not set
CONFIG_DVB_USB_DTT200U=m
# CONFIG_DVB_USB_OPERA1 is not set
# CONFIG_DVB_USB_AF9005 is not set
# CONFIG_DVB_USB_DW2102 is not set
# CONFIG_DVB_USB_CINERGY_T2 is not set
# CONFIG_DVB_USB_ANYSEE is not set
# CONFIG_DVB_USB_DTV5100 is not set
# CONFIG_DVB_USB_AF9015 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
# CONFIG_DVB_SIANO_SMS1XXX is not set
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set
# CONFIG_DVB_FIREDTV is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
# CONFIG_DVB_TDA8261 is not set
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
# CONFIG_DVB_TUA6100 is not set
CONFIG_DVB_CX24116=m
# CONFIG_DVB_SI21XX is not set
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
# CONFIG_DVB_DRX397XD is not set
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
# CONFIG_DVB_DIB7000M is not set
CONFIG_DVB_DIB7000P=m
# CONFIG_DVB_TDA10048 is not set
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
# CONFIG_DVB_TDA10023 is not set
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
# CONFIG_DVB_LGDT3304 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
CONFIG_DVB_S5H1411=m
#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
# CONFIG_DVB_ISL6405 is not set
CONFIG_DVB_ISL6421=m
# CONFIG_DVB_LGS8GL5 is not set
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# CONFIG_DVB_AF9013 is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_SB_COMMON=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
# CONFIG_SND_HIFIER is not set
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
# CONFIG_SND_VIRTUOSO is not set
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
# CONFIG_USB_UEAGLEATM is not set
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_WBSD=m
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_IPATH is not set
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_HW_BRANCH_TRACER is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
Sorry I will not be able test patch/collect more
information till I return to office by monday.
--
Thanks & Regards,
Kamalesh Babulal,
Linux Technology Center,
IBM, ISTL.
^ permalink raw reply
* Re: linux-next: Tree for December 17 (Radeon DRM BUG)
From: Bartlomiej Zolnierkiewicz @ 2008-12-19 19:45 UTC (permalink / raw)
To: Dave Airlie
Cc: Dave Airlie, Kevin Winchester, Stephen Rothwell, linux-next, LKML,
Andrew Morton
In-Reply-To: <1229643564.11646.5.camel@clockmaker.usersys.redhat.com>
On Friday 19 December 2008, Dave Airlie wrote:
> On Thu, 2008-12-18 at 23:09 +0100, Bartlomiej Zolnierkiewicz wrote:
> > tOn Thursday 18 December 2008, Dave Airlie wrote:
> > > On Thu, 2008-12-18 at 20:00 +0100, Bartlomiej Zolnierkiewicz wrote:
> > > > On Thursday 18 December 2008, Dave Airlie wrote:
> > > > > On Thu, Dec 18, 2008 at 10:14 AM, Kevin Winchester
> > > > > <kjwinchester@gmail.com> wrote:
> > > > > > Stephen Rothwell wrote:
> > > > > >>
> > > > > >> Hi all,
> > > > > >>
> > > > > >>
> > > > > >
> > > > > > I get the following BUG in the radeon drm code with today's linux-next when
> > > > > > I run "startx". I have not built or tested linux-next in a while, but the
> > > > > > problem definitely does not occur in mainline.
> > > >
> > > > [...]
> > > >
> > > > This reminds me that drm tree in linux-next still results in BSOD (Black
> > > > Screen Of Death) on starting X for me (as reported on Saturday [1]).
> > > >
> > > > Actually there is more to it as I discovered that my custom X radeon driver
> > > > (which is xorg-x11-drv-ati-6.9.0-61.fc10.i386 with "radeon: no need for this
> > > > anymore" from radeon-gem-cs change reverted, please see [2] for my previous
> > > > monologue) works fine while following stock driver versions:
> > > >
> > > > xorg-x11-drv-ati-6.8.0-19.fc9.i386
> > > > xorg-x11-drv-ati-6.9.0-61.fc10.i386
> > > > xorg-x11-drv-ati-6.9.0-62.fc10.i386
> > > >
> > > > result in BSOD. OTOH they all work with next-20081128 (modulo hangs with
> > > > fc10 ones when "radeon: no need for this anymore" change is not reverted).
> > > >
> > > > [ BTW xorg-x11-drv-ati-6.9.0-62.fc10.i386 still causes hangs when used with
> > > > non-Fedora kernels and Fedora/kms kernel still has performance problems ]
> > > >
> > > > IOW there are a lot of compatibility issues in recent drm/radeon changes.
> > > >
> > > > Dave, could you please start looking into these problems? I'm sure that we
> > > > all want recent drm changes + kms in 2.6.29 but given tight schedule and the
> > > > way things are looking right now I'm quite sceptical...
> > > >
> > > > [1] http://lkml.org/lkml/2008/12/13/76
> > > > [2] http://lkml.org/lkml/2008/12/13/77
> > > >
> > >
> > > Bart,
> > >
> > > please file bugs in RH bugzilla for Fedora issues. Fedora is shipping
> > > drivers that aren't upstream, and I'm attempting to resolve the issues
> > > as they arise. However not having a bug to track stuff in means it just
> > > goes far enough out of my inbox that I forget about it.
> >
> > OK, I'll try to put all issues into RH bugzilla once I find some time.
> >
> > [ OTOH the hang issue mentioned above happens only with vanilla kernels,
> > Fedora kernels are not affected because they ship KMS. Anyway, you
> > could have just told me that you prefer to have a RH bugzilla bug for
> > it two weeks ago (and indeed KMS performance issue should have been
> > handled through bugzilla -- however this one is of lower priority). ]
>
> I know, literally I didn't see a mail in my inbox and forgot about this
> bug until it showed up again, so I should mention Fedora BZ for Fedora
> bugs earlier indeed..
>
> drm-next should be fine in the next iteration, there was a missing patch
> hunk in the last commit, and then a locking bug after that.
The drm problem is indeed fixed in today's linux-next (I remembered to
check that it includes drm-next this time ;-). Thanks!
> I'll try and look at the other stability issues you are seeing with
> Fedora today,
>
> however halving the amount of video RAM everyone gets as a fix for an
> issue you are seeing is clearly not the answer, I'd like to actually
> track down the root cause of where it went wrong.
Same opinion here. As I see now that limitation was added temporarily
to the driver and later removed. I will do some more testing...
Thanks,
Bart
^ permalink raw reply
* Firmware patches for SCSI
From: Jaswinder Singh @ 2008-12-19 19:53 UTC (permalink / raw)
To: James.Bottomley, linux-scsi, LKML, sfr, linux-next,
David Woodhouse
Hello all,
These SCSI's firmware patches are floating in linux-next from long time :
1. qla1280: use request_firmware
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7c84df1aec1bbb4e43ac9e2ba65b137042279a8d
2. advansys: use request_firmware
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=baca2b168d3b7340eac87414c046f7d49de4bf71
3. qlogicpti: use request_firmware
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=2c68b5b6db13786a425accc8576217b120f885f2
Should I need to resend these patches to merge main-stream.
Thank you,
Jaswinder Singh.
^ permalink raw reply
* Firmware patches for DVB
From: Jaswinder Singh @ 2008-12-19 20:03 UTC (permalink / raw)
To: mchehab, v4l-dvb-maintainer, video4linux-list, David Woodhouse,
Jaswinder Singh
Hello all,
These DVB's firmware patches are floating in linux-next from long time :
1. firmware: convert av7110 driver to request_firmware()
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=402669d75012c5f12c27b799145c10db79715f51
2. Remove fdump tool for av7110 firmware
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=43b0a12fa4ac50f6875ea5a238f9e9e26f3fe390
Should I need to resend these patches to merge main-stream.
Thank you,
Jaswinder Singh.
^ permalink raw reply
* Re: Firmware patches for Network
From: Jaswinder Singh @ 2008-12-19 20:11 UTC (permalink / raw)
To: Ben Hutchings
Cc: netdev, LKML, davem, Jeff Garzik, David Woodhouse, sfr,
linux-next
In-Reply-To: <1229715971.3097.6.camel@achroite>
Hello Ben,
On Sat, Dec 20, 2008 at 1:16 AM, Ben Hutchings
<bhutchings@solarflare.com> wrote:
>> 3. git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
>
> This one.
>
4 out of 10 Networking's firmware patches are already floating in
linux-next from long time :
1. firmware: convert e100 driver to request_firmware()
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=c98e632b660ef49b67a9591040230b518785e38a
2. firmware: convert acenic driver to request_firmware()
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=e39c0e190f52331b35931fbe5e34a07114d66171
3. firmware: convert tg3 driver to request_firmware()
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=aadd3ed38a6745e21dc8d2f388bbba42ead0a085
4. starfire: use request_firmware()
http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=df3eea674103ce451357be8eb873092943ad3551
Should I need to resend all 10 or remaining 6.
Thank you,
Jaswinder Singh.
^ permalink raw reply
* Re: Firmware patches for SCSI
From: James Bottomley @ 2008-12-19 20:29 UTC (permalink / raw)
To: Jaswinder Singh; +Cc: linux-scsi, LKML, sfr, linux-next, David Woodhouse
In-Reply-To: <3f9a31f40812191153n636888f4i549409453266d58c@mail.gmail.com>
On Sat, 2008-12-20 at 01:23 +0530, Jaswinder Singh wrote:
> Hello all,
>
> These SCSI's firmware patches are floating in linux-next from long time :
>
> 1. qla1280: use request_firmware
> http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7c84df1aec1bbb4e43ac9e2ba65b137042279a8d
> 2. advansys: use request_firmware
> http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=baca2b168d3b7340eac87414c046f7d49de4bf71
> 3. qlogicpti: use request_firmware
> http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=2c68b5b6db13786a425accc8576217b120f885f2
>
> Should I need to resend these patches to merge main-stream.
Um ... depends how they got into linux-next. The head commit just says
Merge commit 'firmware/master'
Which isn't very descriptive of where it came from. It looks like
either a tree that linux-next shouldn't pull (or one the owner forgot to
push to linus).
James
^ permalink raw reply
* Re: Firmware patches for SCSI
From: Jaswinder Singh @ 2008-12-19 20:41 UTC (permalink / raw)
To: James Bottomley; +Cc: linux-scsi, LKML, sfr, linux-next, David Woodhouse
In-Reply-To: <1229718543.18778.4.camel@localhost.localdomain>
Hello James,
On Sat, Dec 20, 2008 at 1:59 AM, James Bottomley
<James.Bottomley@hansenpartnership.com> wrote:
>
> Um ... depends how they got into linux-next. The head commit just says
>
They got into linux-next via David Woodhouse. :
http://git.infradead.org/users/dwmw2/firmware-2.6.git
> Merge commit 'firmware/master'
>
> Which isn't very descriptive of where it came from. It looks like
> either a tree that linux-next shouldn't pull (or one the owner forgot to
> push to linus).
>
Earlier due to Firmware issues firmware patches are going directly
though David Woodhouse.
Now firmware issues are solved so David wants that the _driver_
patches should be sent directly to the appropriate maintainers / mailing lists.
So I am curious that should I resend these patches based on which git tree.
Thank you,
Jaswinder Singh.
^ permalink raw reply
* Re: Firmware patches for SCSI
From: James Bottomley @ 2008-12-19 20:53 UTC (permalink / raw)
To: Jaswinder Singh; +Cc: linux-scsi, LKML, sfr, linux-next, David Woodhouse
In-Reply-To: <3f9a31f40812191241q40dafdb0lfd2f4487f2870e2@mail.gmail.com>
On Sat, 2008-12-20 at 02:11 +0530, Jaswinder Singh wrote:
> Hello James,
>
> On Sat, Dec 20, 2008 at 1:59 AM, James Bottomley
> <James.Bottomley@hansenpartnership.com> wrote:
> >
> > Um ... depends how they got into linux-next. The head commit just says
> >
>
> They got into linux-next via David Woodhouse. :
> http://git.infradead.org/users/dwmw2/firmware-2.6.git
>
> > Merge commit 'firmware/master'
> >
> > Which isn't very descriptive of where it came from. It looks like
> > either a tree that linux-next shouldn't pull (or one the owner forgot to
> > push to linus).
> >
>
> Earlier due to Firmware issues firmware patches are going directly
> though David Woodhouse.
>
> Now firmware issues are solved so David wants that the _driver_
> patches should be sent directly to the appropriate maintainers / mailing lists.
OK, then whatever tree contains them needs to eject them or be dropped
from linux-next.
> So I am curious that should I resend these patches based on which git tree.
Yes please. For me it would be against scsi-misc ... for the other
drivers it would be their development tree. The simplest thing to do is
probably to rebase them all on top of linux-next (which contains all of
our trees) and then send them to the individual subsystem maintainer
lists.
James
^ permalink raw reply
* Re: linux-next: Tree for December 19 (new CONFIG_NUMA_MIGRATE_IRQ_DESC option)
From: Bartlomiej Zolnierkiewicz @ 2008-12-19 21:01 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, LKML, Yinghai Lu, Ingo Molnar
In-Reply-To: <20081219235757.6b94d9ef.sfr@canb.auug.org.au>
On Friday 19 December 2008, Stephen Rothwell wrote:
> Hi all,
>
> Changes since 20081218:
Just few very minor issues w.r.t. "x86, sparseirq: move irq_desc according
to smp_affinity, v7" (commit 48a1b10aff588833b73994704c47bbd0deb73e9c):
+config NUMA_MIGRATE_IRQ_DESC
+ bool "Move irq desc when changing irq smp_affinity"
+ depends on SPARSE_IRQ && SMP
+ default n
+ help
+ This enables moving irq_desc to cpu/node that irq will use handled.
+
+ If you don't know what to do here, say N.
This is a bit confusing (at least I was confused since I don't have NUMA
set in my config) -- either it should depend on NUMA or the config option
name should be changed.
@@ -2346,14 +2466,34 @@ static void irq_complete_move(struct irq_desc **descp)
struct irq_cfg *cfg = desc->chip_data;
unsigned vector, me;
- if (likely(!cfg->move_in_progress))
+ if (likely(!cfg->move_in_progress)) {
+#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
+ if (likely(!cfg->move_desc_pending))
+ return;
+
+ /* domain is not change, but affinity is changed */
this comment sounds weird
perhaps: /* only affinity is changed */ would be better?
+++ b/kernel/irq/numa_migrate.c
@@ -0,0 +1,127 @@
+/*
+ * linux/kernel/irq/handle.c
+ *
+ * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
+ * Copyright (C) 2005-2006, Thomas Gleixner, Russell King
+ *
+ * This file contains the core interrupt handling code.
+ *
+ * Detailed information is available in Documentation/DocBook/genericirq
+ *
+ */
hmmm? ;-)
^ permalink raw reply
* Re: [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask
From: Yinghai Lu @ 2008-12-19 21:02 UTC (permalink / raw)
To: Kamalesh Babulal; +Cc: Stephen Rothwell, linux-next, LKML, mingo, mel
In-Reply-To: <20081219134636.GA11772@linux.vnet.ibm.com>
Kamalesh Babulal wrote:
> * Yinghai Lu <yinghai@kernel.org> [2008-12-19 03:51:53]:
>
>> On Fri, Dec 19, 2008 at 2:54 AM, Kamalesh Babulal
>> <kamalesh@linux.vnet.ibm.com> wrote:
>>> Hi,
>>>
>>> next-200816 kernel panics, while boot up on x86_64 machine.
>>>
>>> Initializing CPU#0
>>> BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
>>> IP: [<ffffffff80700449>] init_ISA_irqs+0x18/0x53
>> .config and good boot log?
>>
>> YH
> Hi,
>
> I am able to reproduce with next-20081218 kernel also, attaching the
> bootlog and .config file of next-20081218 kernel
>
> root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
> kernel /vmlinuz-autotest root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 c
> onsole=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=s
> erial,ttyS1,19200 IDENT=1229689794
> [Linux-bzImage, setup=0x3000, size=0x274e50]
> initrd /initrd-autotest
> [Linux-initrd @ 0x37e5f000, 0x190980 bytes]
>
> Command line: root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 console=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=serial,ttyS1,19200 IDENT=1229689794
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> Centaur CentaurHauls
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
> BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffcddc0 (usable)
> BIOS-e820: 000000003ffcddc0 - 000000003ffd0000 (ACPI data)
> BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> DMI 2.3 present.
> last_pfn = 0x3ffcd max_arch_pfn = 0x3ffffffff
> init_memory_mapping: 0000000000000000-000000003ffcd000
> 0000000000 - 003fe00000 page 2M
> 003fe00000 - 003ffcd000 page 4k
> kernel direct mapping tables up to 3ffcd000 @ 8000-b000
> last_map_addr: 3ffcd000 end: 3ffcd000
> RAMDISK: 37e5f000 - 37fef980
> ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
> ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
> ACPI: FACS 3FFCFCC0, 0040
> ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: Local APIC address 0xfee00000
> SRAT: PXM 0 -> APIC 0 -> Node 0
> SRAT: PXM 0 -> APIC 1 -> Node 0
> SRAT: PXM 1 -> APIC 2 -> Node 1
> SRAT: PXM 1 -> APIC 3 -> Node 1
> SRAT: Node 0 PXM 0 0-40000000
> NUMA: Using 63 for the hash shift.
> Bootmem setup node 0 0000000000000000-000000003ffcd000
> NODE_DATA [0000000000009000 - 000000000000efff]
> bootmap [000000000000f000 - 0000000000016fff] pages 8
> (6 early reservations) ==> bootmem [0000000000 - 003ffcd000]
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> #2 [0000200000 - 00008198b0] TEXT DATA BSS ==> [0000200000 - 00008198b0]
> #3 [0037e5f000 - 0037fef980] RAMDISK ==> [0037e5f000 - 0037fef980]
> #4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
> #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
> found SMP MP-table at [ffff88000009d540] 0009d540
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> Normal 0x00100000 -> 0x00100000
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0x00000000 -> 0x0000009d
> 0: 0x00000100 -> 0x0003ffcd
> On node 0 totalpages: 261994
> DMA zone: 64 pages used for memmap
> DMA zone: 1665 pages reserved
> DMA zone: 2268 pages, LIFO batch:0
> DMA32 zone: 4032 pages used for memmap
> DMA32 zone: 253965 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> Movable zone: 0 pages used for memmap
> Detected use of extended apic ids on hypertransport bus
> Detected use of extended apic ids on hypertransport bus
> ACPI: PM-Timer IO Port: 0x2208
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 14, version 0, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
> IOAPIC[1]: apic_id 13, version 0, address 0xfec10000, GSI 24-27
> ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
> IOAPIC[2]: apic_id 12, version 0, address 0xfec20000, GSI 48-51
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ11 used by override.
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x10228203 base: 0xfecff000
> SMP: Allowing 4 CPUs, 0 hotplug CPUs
> Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
> PERCPU: Allocating 49152 bytes of per cpu data
> per cpu data for cpu0 on node0 at 000000000100e000
> per cpu data for cpu1 on node0 at 000000000101a000
> per cpu data for cpu2 on node0 at 0000000001026000
> per cpu data for cpu3 on node0 at 0000000001032000
> NR_CPUS: 255, nr_cpu_ids: 4, nr_node_ids 1
> Built 1 zonelists in Node order, mobility grouping on. Total pages: 256233
> Policy zone: DMA32
> Kernel command line: root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 console=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=serial,ttyS1,19200 IDENT=1229689794
> Initializing CPU#0
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
> IP: [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
> PGD 0
> Thread overran stack, or stack corrupted
> Oops: 0002 [#1] SMP
> last sysfs file:
> CPU 0
> Modules linked in:
> Pid: 0, comm: swapper Not tainted 2.6.28-rc8-next-20081218-autotest #1
> RIP: 0010:[<ffffffff80714479>] [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
> RSP: 0018:ffffffff80705f88 EFLAGS: 00010093
> RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff80778a80
> RDX: 0000000000000100 RSI: 0000000000000092 RDI: 0000000000000000
> RBP: 0000000000000000 R08: ffff88008089e000 R09: 0000000000000000
> R10: ffff880001012c60 R11: ffffffff803560a0 R12: ffff88000103e040
> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffffffff806f73c0(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000048 CR3: 0000000000201000 CR4: 00000000000006a0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 0, threadinfo ffffffff80704000, task ffffffff806843a0)
> Stack:
> ffffffff8073b560 ffffffff807144bd ffffffff806e8f40 ffffffff8050e772
> ffffffff8073b560 ffffffff8070daf6 0000000000000000 0000000000093370
> 0000000000000000 ffffffff8070d394 80708e000010d136 00000000ffffffff
> Call Trace:
> [<ffffffff807144bd>] native_init_IRQ+0x9/0x931
> [<ffffffff8050e772>] register_cpu_notifier+0x1f/0x23
> [<ffffffff8070daf6>] start_kernel+0x1a8/0x319
> [<ffffffff8070d394>] x86_64_start_kernel+0xde/0xe2
> Code: 85 c0 75 0d 59 48 c7 c7 20 5f 68 80 e9 65 74 cb ff 5a c3 53 31 db e8 ba 85 00 00 31 ff e8 52 ad af ff 89 df e8 6a 12 b5 ff 89 df <c7> 40 48 00 02 00 00 48 c7 40 40 00 00 00 00 c7 40 4c 01 00 00
> RIP [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
> RSP <ffffffff80705f88>
> CR2: 0000000000000048
can you check if tip works or not?
YH
^ permalink raw reply
* Re: linux-next: Tree for December 19 (new CONFIG_NUMA_MIGRATE_IRQ_DESC option)
From: Yinghai Lu @ 2008-12-19 21:07 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: Stephen Rothwell, linux-next, LKML, Ingo Molnar
In-Reply-To: <200812192201.28665.bzolnier@gmail.com>
Bartlomiej Zolnierkiewicz wrote:
> On Friday 19 December 2008, Stephen Rothwell wrote:
>> Hi all,
>>
>> Changes since 20081218:
>
> Just few very minor issues w.r.t. "x86, sparseirq: move irq_desc according
> to smp_affinity, v7" (commit 48a1b10aff588833b73994704c47bbd0deb73e9c):
>
> +config NUMA_MIGRATE_IRQ_DESC
> + bool "Move irq desc when changing irq smp_affinity"
> + depends on SPARSE_IRQ && SMP
> + default n
> + help
> + This enables moving irq_desc to cpu/node that irq will use handled.
> +
> + If you don't know what to do here, say N.
>
> This is a bit confusing (at least I was confused since I don't have NUMA
> set in my config) -- either it should depend on NUMA or the config option
> name should be changed.
should be changed to
depends on SPARSE_IRQ && NUMA
>
> @@ -2346,14 +2466,34 @@ static void irq_complete_move(struct irq_desc **descp)
> struct irq_cfg *cfg = desc->chip_data;
> unsigned vector, me;
>
> - if (likely(!cfg->move_in_progress))
> + if (likely(!cfg->move_in_progress)) {
> +#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
> + if (likely(!cfg->move_desc_pending))
> + return;
> +
> + /* domain is not change, but affinity is changed */
>
> this comment sounds weird
for logical flat mode, domain will be online_cpu_mask.
so need to move irq_desc when smp_affinity is changed.
>
> perhaps: /* only affinity is changed */ would be better?
>
> +++ b/kernel/irq/numa_migrate.c
> @@ -0,0 +1,127 @@
> +/*
> + * linux/kernel/irq/handle.c
> + *
> + * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
> + * Copyright (C) 2005-2006, Thomas Gleixner, Russell King
> + *
> + * This file contains the core interrupt handling code.
> + *
> + * Detailed information is available in Documentation/DocBook/genericirq
> + *
> + */
>
> hmmm? ;-)
seperated from irq/handle.c
oh, will remove those lines.
YH
^ permalink raw reply
* Re: linux-next: Tree for December 19 (new CONFIG_NUMA_MIGRATE_IRQ_DESC option)
From: Ingo Molnar @ 2008-12-19 21:40 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz; +Cc: Stephen Rothwell, linux-next, LKML, Yinghai Lu
In-Reply-To: <200812192201.28665.bzolnier@gmail.com>
* Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> wrote:
> On Friday 19 December 2008, Stephen Rothwell wrote:
> > Hi all,
> >
> > Changes since 20081218:
>
> Just few very minor issues w.r.t. "x86, sparseirq: move irq_desc according
> to smp_affinity, v7" (commit 48a1b10aff588833b73994704c47bbd0deb73e9c):
>
> +config NUMA_MIGRATE_IRQ_DESC
> + bool "Move irq desc when changing irq smp_affinity"
> + depends on SPARSE_IRQ && SMP
> + default n
> + help
> + This enables moving irq_desc to cpu/node that irq will use handled.
> +
> + If you don't know what to do here, say N.
>
> This is a bit confusing (at least I was confused since I don't have NUMA
> set in my config) -- either it should depend on NUMA or the config
> option name should be changed.
yeah, should be "depends on NUMA".
> @@ -2346,14 +2466,34 @@ static void irq_complete_move(struct irq_desc **descp)
> struct irq_cfg *cfg = desc->chip_data;
> unsigned vector, me;
>
> - if (likely(!cfg->move_in_progress))
> + if (likely(!cfg->move_in_progress)) {
> +#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
> + if (likely(!cfg->move_desc_pending))
> + return;
> +
> + /* domain is not change, but affinity is changed */
>
> this comment sounds weird
>
> perhaps: /* only affinity is changed */ would be better?
perhaps:
/* domain has not changed, but affinity did */
> +++ b/kernel/irq/numa_migrate.c
> @@ -0,0 +1,127 @@
> +/*
> + * linux/kernel/irq/handle.c
> + *
> + * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
> + * Copyright (C) 2005-2006, Thomas Gleixner, Russell King
> + *
> + * This file contains the core interrupt handling code.
> + *
> + * Detailed information is available in Documentation/DocBook/genericirq
> + *
> + */
>
> hmmm? ;-)
indeed, needs fixing too :)
Ingo
^ permalink raw reply
* Re: linux-next: Tree for December 19 (new CONFIG_NUMA_MIGRATE_IRQ_DESC option)
From: Ingo Molnar @ 2008-12-19 21:42 UTC (permalink / raw)
To: Yinghai Lu; +Cc: Bartlomiej Zolnierkiewicz, Stephen Rothwell, linux-next, LKML
In-Reply-To: <494C0D28.6040002@kernel.org>
* Yinghai Lu <yinghai@kernel.org> wrote:
> > +++ b/kernel/irq/numa_migrate.c
> > @@ -0,0 +1,127 @@
> > +/*
> > + * linux/kernel/irq/handle.c
> > + *
> > + * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
> > + * Copyright (C) 2005-2006, Thomas Gleixner, Russell King
> > + *
> > + * This file contains the core interrupt handling code.
> > + *
> > + * Detailed information is available in Documentation/DocBook/genericirq
> > + *
> > + */
> >
> > hmmm? ;-)
>
> seperated from irq/handle.c
>
> oh, will remove those lines.
Yeah, replace them with something like:
/*
* NUMA irq-desc migration code
*
* Migrate IRQ data structures (irq_desc, chip_data, etc.) over to
* the new "home node" of the IRQ.
*/
Ingo
^ permalink raw reply
* [PATCH] sparseirq: fix numa_migrate_irq_desc dependency and comments
From: Yinghai Lu @ 2008-12-19 21:48 UTC (permalink / raw)
To: Ingo Molnar
Cc: Bartlomiej Zolnierkiewicz, Stephen Rothwell, linux-next, LKML,
Thomas Gleixner, H. Peter Anvin
In-Reply-To: <20081219214221.GE2351@elte.hu>
Impact: clean up
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> pointed out config and comments
are not right.
update it depend to NUMA, and fix some comments
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/Kconfig | 2 +-
arch/x86/kernel/io_apic.c | 2 +-
kernel/irq/numa_migrate.c | 11 +++--------
3 files changed, 5 insertions(+), 10 deletions(-)
Index: linux-2.6/arch/x86/Kconfig
===================================================================
--- linux-2.6.orig/arch/x86/Kconfig
+++ linux-2.6/arch/x86/Kconfig
@@ -259,7 +259,7 @@ config SPARSE_IRQ
config NUMA_MIGRATE_IRQ_DESC
bool "Move irq desc when changing irq smp_affinity"
- depends on SPARSE_IRQ && SMP
+ depends on SPARSE_IRQ && NUMA
default n
help
This enables moving irq_desc to cpu/node that irq will use handled.
Index: linux-2.6/arch/x86/kernel/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/io_apic.c
+++ linux-2.6/arch/x86/kernel/io_apic.c
@@ -2519,7 +2519,7 @@ static void irq_complete_move(struct irq
if (likely(!cfg->move_desc_pending))
return;
- /* domain is not change, but affinity is changed */
+ /* domain has not changed, but affinity did */
me = smp_processor_id();
if (cpu_isset(me, desc->affinity)) {
*descp = desc = move_irq_desc(desc, me);
Index: linux-2.6/kernel/irq/numa_migrate.c
===================================================================
--- linux-2.6.orig/kernel/irq/numa_migrate.c
+++ linux-2.6/kernel/irq/numa_migrate.c
@@ -1,13 +1,8 @@
/*
- * linux/kernel/irq/handle.c
- *
- * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
- * Copyright (C) 2005-2006, Thomas Gleixner, Russell King
- *
- * This file contains the core interrupt handling code.
- *
- * Detailed information is available in Documentation/DocBook/genericirq
+ * NUMA irq-desc migration code
*
+ * Migrate IRQ data structures (irq_desc, chip_data, etc.) over to
+ * the new "home node" of the IRQ.
*/
#include <linux/irq.h>
^ permalink raw reply
* Re: [PATCH] sparseirq: fix numa_migrate_irq_desc dependency and comments
From: Ingo Molnar @ 2008-12-19 21:57 UTC (permalink / raw)
To: Yinghai Lu
Cc: Bartlomiej Zolnierkiewicz, Stephen Rothwell, linux-next, LKML,
Thomas Gleixner, H. Peter Anvin
In-Reply-To: <494C16B2.9000005@kernel.org>
* Yinghai Lu <yinghai@kernel.org> wrote:
> Impact: clean up
>
> Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> pointed out config and comments
> are not right.
>
> update it depend to NUMA, and fix some comments
>
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>
> ---
> arch/x86/Kconfig | 2 +-
> arch/x86/kernel/io_apic.c | 2 +-
> kernel/irq/numa_migrate.c | 11 +++--------
> 3 files changed, 5 insertions(+), 10 deletions(-)
applied to tip/irq/sparseirq, thanks!
Note, the usual way to credit review/bug feedback is to add this line:
Reported-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
and then you dont have to mention a full email in the changelog itself.
See below how the final commit ended up looking like.
Ingo
-------------->
>From b909895739427874c089bc0e03dc119f99cab2dd Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Fri, 19 Dec 2008 13:48:34 -0800
Subject: [PATCH] sparseirq: fix numa_migrate_irq_desc dependency and comments
Impact: reduce kconfig variable scope and clean up
Bartlomiej pointed out that the config dependencies and comments are not right.
update it depend to NUMA, and fix some comments
Reported-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/Kconfig | 2 +-
arch/x86/kernel/io_apic.c | 2 +-
kernel/irq/numa_migrate.c | 11 +++--------
3 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 60a0088..5c24382 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -250,7 +250,7 @@ config SPARSE_IRQ
config NUMA_MIGRATE_IRQ_DESC
bool "Move irq desc when changing irq smp_affinity"
- depends on SPARSE_IRQ && SMP
+ depends on SPARSE_IRQ && NUMA
default n
help
This enables moving irq_desc to cpu/node that irq will use handled.
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index bfe1245..a74887b 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -2471,7 +2471,7 @@ static void irq_complete_move(struct irq_desc **descp)
if (likely(!cfg->move_desc_pending))
return;
- /* domain is not change, but affinity is changed */
+ /* domain has not changed, but affinity did */
me = smp_processor_id();
if (cpu_isset(me, desc->affinity)) {
*descp = desc = move_irq_desc(desc, me);
diff --git a/kernel/irq/numa_migrate.c b/kernel/irq/numa_migrate.c
index 0178e22..089c374 100644
--- a/kernel/irq/numa_migrate.c
+++ b/kernel/irq/numa_migrate.c
@@ -1,13 +1,8 @@
/*
- * linux/kernel/irq/handle.c
- *
- * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
- * Copyright (C) 2005-2006, Thomas Gleixner, Russell King
- *
- * This file contains the core interrupt handling code.
- *
- * Detailed information is available in Documentation/DocBook/genericirq
+ * NUMA irq-desc migration code
*
+ * Migrate IRQ data structures (irq_desc, chip_data, etc.) over to
+ * the new "home node" of the IRQ.
*/
#include <linux/irq.h>
^ permalink raw reply related
* Re: linux-next: Tree for December 17 (Radeon DRM BUG)
From: Kevin Winchester @ 2008-12-19 23:07 UTC (permalink / raw)
To: Dave Airlie; +Cc: Stephen Rothwell, linux-next, LKML, Dave Airlie
In-Reply-To: <21d7e9970812172247t3d67e6f0waffa99587e2e024b@mail.gmail.com>
Dave Airlie wrote:
> On Thu, Dec 18, 2008 at 10:14 AM, Kevin Winchester
> <kjwinchester@gmail.com> wrote:
>
>> Stephen Rothwell wrote:
>>
>>> Hi all,
>>>
>>>
>>>
>> I get the following BUG in the radeon drm code with today's linux-next when
>> I run "startx". I have not built or tested linux-next in a while, but the
>> problem definitely does not occur in mainline.
>>
>
> Do you have another X server running or just console?
>
Just console.
> can you get a full dmesg with
>
> echo 1 > /sys/module/drm/parameters/debug
>
>
[ 0.000000] Linux version 2.6.28-rc8-next-20081217 (kevin@winchester)
(gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #192 Wed Dec 17 17:04:30 AST 2008
[ 0.000000] Command line: root=/dev/sda1 hpet=force
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004fff0000 (usable)
[ 0.000000] BIOS-e820: 000000004fff0000 - 000000004fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004fff8000 - 0000000050000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it
around.
[ 0.000000] last_pfn = 0x4fff0 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-000000004fff0000
[ 0.000000] 0000000000 - 004fe00000 page 2M
[ 0.000000] 004fe00000 - 004fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 4fff0000 @ 10000-14000
[ 0.000000] last_map_addr: 4fff0000 end: 4fff0000
[ 0.000000] ACPI: RSDP 000FA0C0, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 4FFF0000, 002C (r1 AMIINT VIA_K8 10
MSFT 97)
[ 0.000000] ACPI: FACP 4FFF0030, 0081 (r1 AMIINT VIA_K8 11
MSFT 97)
[ 0.000000] ACPI: DSDT 4FFF0120, 36C5 (r1 VIA VIA_K8 1000
MSFT 100000D)
[ 0.000000] ACPI: FACS 4FFF8000, 0040
[ 0.000000] ACPI: APIC 4FFF00C0, 0054 (r1 AMIINT VIA_K8 9
MSFT 97)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 004fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 000078c910] TEXT DATA BSS ==>
[0000200000 - 000078c910]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #4 [0000010000 - 0000012000] PGTABLE ==>
[0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000fba70] 000fba70
[ 0.000000] [ffffe20000000000-ffffe200011fffff] PMD ->
[ffff880001200000-ffff8800023fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0004fff0
[ 0.000000] On node 0 totalpages: 327551
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1523 pages reserved
[ 0.000000] DMA zone: 2404 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4424 pages used for memmap
[ 0.000000] DMA32 zone: 319144 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 60000000 (gap:
50000000:aec00000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 321548
[ 0.000000] Kernel command line: root=/dev/sda1 hpet=force
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using PMTIMER reference calibration
[ 0.000000] Detected 1800.008 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 0.000999] Inode-cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.000999] Checking aperture...
[ 0.000999] AGP bridge at 00:00:00
[ 0.000999] Aperture from AGP @ d0000000 old size 32 MB
[ 0.000999] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
[ 0.000999] Node 0: aperture @ d0000000 size 128 MB
[ 0.000999] Memory: 1282288k/1310656k available (2672k kernel code,
452k absent, 27308k reserved, 2032k data, 260k init)
[ 0.000999] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.001024] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3600.01 BogoMIPS (lpj=1800008)
[ 0.001173] Mount-cache hash table entries: 256
[ 0.001538] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.001589] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.001637] tseg: 0000000000
[ 0.001674] CPU: AMD Athlon(tm) 64 Processor 2800+ stepping 0a
[ 0.001802] ACPI: Core revision 20081031
[ 0.010007] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.010070] ftrace: allocating 15382 entries in 122 pages
[ 0.013765] Setting APIC routing to flat
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] alloc irq_2_pin on cpu 0 node 0
[ 0.013997] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.023996] net_namespace: 576 bytes
[ 0.023996] NET: Registered protocol family 16
[ 0.024021] node 0 link 0: io port [0, ffffff]
[ 0.024025] TOM: 0000000050000000 aka 1280M
[ 0.024074] node 0 link 0: mmio [a0000, bffff]
[ 0.024077] node 0 link 0: mmio [50000000, ffffffff]
[ 0.024081] bus: [00,ff] on node 0 link 0
[ 0.024083] bus: 00 index 0 io port: [0, ffff]
[ 0.024086] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.024088] bus: 00 index 2 mmio: [50000000, fcffffffff]
[ 0.024098] ACPI: bus type pci registered
[ 0.024160] PCI: Using configuration type 1 for base access
[ 0.028819] bio: create slab <bio-0> at 0
[ 0.029724] ACPI: EC: Look up EC in DSDT
[ 0.032014] ACPI Warning (dsobject-0501): Package List length (65)
larger than NumElements count (2), truncated
[ 0.032110] [20081031]
[ 0.036779] ACPI: Interpreter enabled
[ 0.036829] ACPI: (supports S0 S1 S3 S5)
[ 0.036997] ACPI: Using IOAPIC for interrupt routing
[ 0.042058] ACPI: No dock devices found.
[ 0.042126] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.042289] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.042376] pci 0000:00:01.0: supports D1
[ 0.042407] pci 0000:00:06.0: reg 10 io port: [0xec00-0xecff]
[ 0.042413] pci 0000:00:06.0: reg 14 32bit mmio: [0xcfffff00-0xcfffffff]
[ 0.042432] pci 0000:00:06.0: reg 30 32bit mmio: [0xcff80000-0xcffbffff]
[ 0.042447] pci 0000:00:06.0: supports D1 D2
[ 0.042450] pci 0000:00:06.0: PME# supported from D1 D2 D3hot D3cold
[ 0.042502] pci 0000:00:06.0: PME# disabled
[ 0.042577] pci 0000:00:0b.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.042583] pci 0000:00:0b.0: reg 14 32bit mmio: [0xcffffe00-0xcffffeff]
[ 0.042602] pci 0000:00:0b.0: reg 30 32bit mmio: [0xcffc0000-0xcffdffff]
[ 0.042617] pci 0000:00:0b.0: supports D1 D2
[ 0.042620] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
[ 0.042671] pci 0000:00:0b.0: PME# disabled
[ 0.042759] pci 0000:00:0f.0: reg 20 io port: [0xfc00-0xfc0f]
[ 0.042820] pci 0000:00:10.0: reg 20 io port: [0xd800-0xd81f]
[ 0.042842] pci 0000:00:10.0: supports D1 D2
[ 0.042845] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.042896] pci 0000:00:10.0: PME# disabled
[ 0.042979] pci 0000:00:10.1: reg 20 io port: [0xdc00-0xdc1f]
[ 0.043022] pci 0000:00:10.1: supports D1 D2
[ 0.043024] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.043076] pci 0000:00:10.1: PME# disabled
[ 0.043160] pci 0000:00:10.2: reg 20 io port: [0xe000-0xe01f]
[ 0.043182] pci 0000:00:10.2: supports D1 D2
[ 0.043184] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.043236] pci 0000:00:10.2: PME# disabled
[ 0.043319] pci 0000:00:10.3: reg 20 io port: [0xe400-0xe41f]
[ 0.043341] pci 0000:00:10.3: supports D1 D2
[ 0.043343] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.043395] pci 0000:00:10.3: PME# disabled
[ 0.043772] pci 0000:00:10.4: reg 10 32bit mmio: [0xcffffc00-0xcffffcff]
[ 0.043806] pci 0000:00:10.4: supports D1 D2
[ 0.043808] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.043859] pci 0000:00:10.4: PME# disabled
[ 0.043959] pci 0000:00:11.0: Force enabled HPET at 0xfed00000
[ 0.044010] pci 0000:00:11.5: reg 10 io port: [0xd400-0xd4ff]
[ 0.044046] pci 0000:00:11.5: supports D1 D2
[ 0.044144] pci 0000:01:00.0: reg 10 32bit mmio: [0xb0000000-0xbfffffff]
[ 0.044149] pci 0000:01:00.0: reg 14 io port: [0xc800-0xc8ff]
[ 0.044154] pci 0000:01:00.0: reg 18 32bit mmio: [0xcfef0000-0xcfefffff]
[ 0.044163] pci 0000:01:00.0: reg 30 32bit mmio: [0xcfec0000-0xcfedffff]
[ 0.044175] pci 0000:01:00.0: supports D1 D2
[ 0.044196] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.044200] pci 0000:00:01.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff]
[ 0.044204] pci 0000:00:01.0: bridge 32bit mmio pref:
[0xafd00000-0xcfcfffff]
[ 0.044211] pci 0000:00: bus on NUMA node 0
[ 0.044220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.063160] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.063692] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.064218] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12
14 15)
[ 0.064744] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 0.065271] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.066221] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.066818] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.067403] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12
14 15) *0, disabled.
[ 0.068029] ACPI: Power Resource [URP1] (off)
[ 0.068113] ACPI: Power Resource [URP2] (off)
[ 0.068197] ACPI: Power Resource [FDDP] (off)
[ 0.068280] ACPI: Power Resource [LPTP] (off)
[ 0.068739] SCSI subsystem initialized
[ 0.068838] libata version 3.00 loaded.
[ 0.069007] usbcore: registered new interface driver usbfs
[ 0.069098] usbcore: registered new interface driver hub
[ 0.069201] usbcore: registered new device driver usb
[ 0.069434] PCI: Using ACPI for IRQ routing
[ 0.069494] pci 0000:00:00.0: BAR 0: can't allocate resource
[ 0.073101] agpgart-amd64 0000:00:00.0: AGP bridge [1106:3188]
[ 0.083981] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 0.084201] hpet clockevent registered
[ 0.084209] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.084378] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.088994] pnp: PnP ACPI init
[ 0.089049] ACPI: bus type pnp registered
[ 0.091981] pnp: PnP ACPI: found 6 devices
[ 0.092033] ACPI: ACPI bus type pnp unregistered
[ 0.092094] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.092144] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 0.092194] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.092244] system 00:01: ioport range 0x400-0x40f has been reserved
[ 0.092294] system 00:01: ioport range 0x820-0x821 has been reserved
[ 0.092345] system 00:01: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.097682] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.097733] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.097783] pci 0000:00:01.0: MEM window: 0xcfe00000-0xcfefffff
[ 0.097834] pci 0000:00:01.0: PREFETCH window:
0x000000afd00000-0x000000cfcfffff
[ 0.097907] pci 0000:00:01.0: setting latency timer to 64
[ 0.097912] pci 0000:00: bus resource 0 io: [0x00-0xffff]
[ 0.097915] pci 0000:00: bus resource 1 mem:
[0x000000-0xffffffffffffffff]
[ 0.097918] pci 0000:01: bus resource 0 io: [0xc000-0xcfff]
[ 0.097920] pci 0000:01: bus resource 1 mem: [0xcfe00000-0xcfefffff]
[ 0.097923] pci 0000:01: bus resource 2 mem: [0xafd00000-0xcfcfffff]
[ 0.097926] pci 0000:01: bus resource 3 mem: [0x0-0x0]
[ 0.097973] NET: Registered protocol family 2
[ 0.109032] IP route cache hash table entries: 65536 (order: 7,
524288 bytes)
[ 0.110146] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.118296] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.119398] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.119449] TCP reno registered
[ 0.122093] NET: Registered protocol family 1
[ 0.127358] alg: No test for stdrng (krng)
[ 0.127546] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.127610] io scheduler noop registered
[ 0.127729] io scheduler cfq registered (default)
[ 0.127793] PCI: VIA PCI bridge detected. Disabling DAC.
[ 0.127963] pci 0000:01:00.0: Boot video device
[ 0.128186] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.128249] ACPI: Power Button (FF) [PWRF]
[ 0.128414] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.128477] ACPI: Power Button (CM) [PWRB]
[ 0.128659] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.128728] ACPI: Sleep Button (CM) [SLPB]
[ 0.129298] processor ACPI_CPU:00: registered as cooling_device0
[ 0.142204] Linux agpgart interface v0.103
[ 0.142301] [drm] Initialized drm 1.1.0 20060810
[ 0.142711] alloc irq_2_pin on cpu 0 node 0
[ 0.142724] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.143012] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 0.143532] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.143606] r8169 0000:00:0b.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 0.143671] r8169 0000:00:0b.0: PCI: Disallowing DAC for device
[ 0.143729] r8169 0000:00:0b.0: no PCI Express capability
[ 0.143950] eth0: RTL8110s at 0xffffc2000001ee00, 00:11:09:e8:d8:73,
XID 04000000 IRQ 16
[ 0.147372] Driver 'sd' needs updating - please use bus_type methods
[ 0.149500] Driver 'sr' needs updating - please use bus_type methods
[ 0.149633] pata_via 0000:00:0f.0: version 0.3.3
[ 0.149649] alloc irq_2_pin on cpu 0 node 0
[ 0.149655] pata_via 0000:00:0f.0: PCI INT A -> GSI 20 (level, low)
-> IRQ 20
[ 0.149971] scsi0 : pata_via
[ 0.150206] scsi1 : pata_via
[ 0.153808] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00
irq 14
[ 0.153859] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08
irq 15
[ 0.311432] ata1.00: HPA detected: current 156299375, native 156301488
[ 0.311486] ata1.00: ATA-6: WDC WD800JB-00JJC0, 05.01C05, max UDMA/100
[ 0.311536] ata1.00: 156299375 sectors, multi 16: LBA
[ 0.311729] ata1.01: ATA-6: WDC WD800JB-00JJA0, 05.01C05, max UDMA/100
[ 0.311779] ata1.01: 156301488 sectors, multi 16: LBA
[ 0.315304] ata1.00: configured for UDMA/100
[ 0.318295] ata1.01: configured for UDMA/100
[ 0.491281] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A104, max UDMA/33
[ 0.491361] ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8163B, 0L23, max UDMA/33
[ 0.513166] ata2.00: configured for UDMA/33
[ 0.535162] ata2.01: configured for UDMA/33
[ 0.537923] isa bounce pool size: 16 pages
[ 0.538137] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00JJ
05.0 PQ: 0 ANSI: 5
[ 0.538395] sd 0:0:0:0: [sda] 156299375 512-byte hardware sectors:
(80.0 GB/74.5 GiB)
[ 0.538478] sd 0:0:0:0: [sda] Write Protect is off
[ 0.538527] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.538557] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.538698] sd 0:0:0:0: [sda] 156299375 512-byte hardware sectors:
(80.0 GB/74.5 GiB)
[ 0.538774] sd 0:0:0:0: [sda] Write Protect is off
[ 0.538822] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.538851] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.538922] sda: sda1 sda2 sda3
[ 0.545579] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.545759] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.545957] scsi 0:0:1:0: Direct-Access ATA WDC WD800JB-00JJ
05.0 PQ: 0 ANSI: 5
[ 0.546207] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors:
(80.0 GB/74.5 GiB)
[ 0.546284] sd 0:0:1:0: [sdb] Write Protect is off
[ 0.546331] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.546359] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.546483] sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors:
(80.0 GB/74.5 GiB)
[ 0.546558] sd 0:0:1:0: [sdb] Write Protect is off
[ 0.546606] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.546633] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.546698] sdb: sdb1 sdb2 < sdb5<7>Switched to high resolution mode
on CPU 0
[ 0.587465] sdb6 >
[ 0.587880] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 0.588043] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 0.591926] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4163B
A104 PQ: 0 ANSI: 5
[ 0.604515] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 0.604577] Uniform CD-ROM driver Revision: 3.20
[ 0.604765] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.604864] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 0.613074] scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8163B
0L23 PQ: 0 ANSI: 5
[ 0.620399] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 0.620585] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 0.620691] sr 1:0:1:0: Attached scsi generic sg3 type 5
[ 0.620861] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.620952] alloc irq_2_pin on cpu 0 node 0
[ 0.620963] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low)
-> IRQ 21
[ 0.621065] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.621168] ehci_hcd 0000:00:10.4: new USB bus registered, assigned
bus number 1
[ 0.621318] ehci_hcd 0000:00:10.4: irq 21, io mem 0xcffffc00
[ 0.627007] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.627192] usb usb1: configuration #1 chosen from 1 choice
[ 0.627302] hub 1-0:1.0: USB hub found
[ 0.627376] hub 1-0:1.0: 8 ports detected
[ 0.627653] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.627819] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low)
-> IRQ 21
[ 0.627877] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.627974] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 2
[ 0.628075] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800
[ 0.628265] usb usb2: configuration #1 chosen from 1 choice
[ 0.628372] hub 2-0:1.0: USB hub found
[ 0.628433] hub 2-0:1.0: 2 ports detected
[ 0.628627] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low)
-> IRQ 21
[ 0.628681] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.628785] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 3
[ 0.628865] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00
[ 0.629057] usb usb3: configuration #1 chosen from 1 choice
[ 0.629161] hub 3-0:1.0: USB hub found
[ 0.629217] hub 3-0:1.0: 2 ports detected
[ 0.629412] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 0.629467] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.629564] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 4
[ 0.629645] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
[ 0.629835] usb usb4: configuration #1 chosen from 1 choice
[ 0.629938] hub 4-0:1.0: USB hub found
[ 0.629995] hub 4-0:1.0: 2 ports detected
[ 0.630191] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 0.630245] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.630341] uhci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 5
[ 0.630423] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
[ 0.630613] usb usb5: configuration #1 chosen from 1 choice
[ 0.630725] hub 5-0:1.0: USB hub found
[ 0.630796] hub 5-0:1.0: 2 ports detected
[ 0.631117] usbcore: registered new interface driver usblp
[ 0.631166] Initializing USB Mass Storage driver...
[ 0.631282] usbcore: registered new interface driver usb-storage
[ 0.631331] USB Mass Storage support registered.
[ 0.642090] rtc_cmos 00:03: RTC can wake from S4
[ 0.642192] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.642278] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.642424] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts
with ACPI region SMOV [0x400-0x406]
[ 0.642487] ACPI: Device needs an ACPI driver
[ 0.642643] cpuidle: using governor ladder
[ 0.642690] cpuidle: using governor menu
[ 0.642871] usbcore: registered new interface driver usbhid
[ 0.642920] usbhid: v2.6:USB HID core driver
[ 0.643059] Advanced Linux Sound Architecture Driver Version 1.0.18a.
[ 0.643475] alloc irq_2_pin on cpu 0 node 0
[ 0.643484] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level,
low) -> IRQ 22
[ 0.643697] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 1.135012] usb 5-1: new low speed USB device using uhci_hcd and
address 2
[ 1.158129] ALSA device list:
[ 1.158184] #0: VIA 8237 with ALC655 at 0xd400, irq 22
[ 1.158272] TCP cubic registered
[ 1.158320] NET: Registered protocol family 17
[ 1.158388] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 2800+
processors (1 cpu cores) (version 2.20.00)
[ 1.158528] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x2
[ 1.158576] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12
[ 1.159128] rtc_cmos 00:03: setting system clock to 2008-12-19
20:00:06 UTC (1229716806)
[ 1.171597] kjournald starting. Commit interval 5 seconds
[ 1.171657] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.171719] VFS: Mounted root (ext3 filesystem) readonly.
[ 1.171784] Freeing unused kernel memory: 260k freed
[ 1.172218] Write protecting the kernel read-only data: 1536k
[ 1.295600] usb 5-1: configuration #1 chosen from 1 choice
[ 1.314287] input: Logitech USB Mouse as
/devices/pci0000:00/0000:00:10.3/usb5/5-1/5-1:1.0/input/input3
[ 1.317076] generic-usb 0003:046D:C00C.0001: input: USB HID v1.10
Mouse [Logitech USB Mouse] on usb-0000:00:10.3-1/input0
[ 1.523025] usb 5-2: new low speed USB device using uhci_hcd and
address 3
[ 1.693636] usb 5-2: configuration #1 chosen from 1 choice
[ 1.711019] input: Microsoft Microsoft® Digital Media Pro Keyboard as
/devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2:1.0/input/input4
[ 1.719101] generic-usb 0003:045E:00B0.0002: input: USB HID v1.11
Keyboard [Microsoft Microsoft® Digital Media Pro Keyboard] on
usb-0000:00:10.3-2/input0
[ 1.748587] input: Microsoft Microsoft® Digital Media Pro Keyboard as
/devices/pci0000:00/0000:00:10.3/usb5/5-2/5-2:1.1/input/input5
[ 1.754101] generic-usb 0003:045E:00B0.0003: input: USB HID v1.11
Device [Microsoft Microsoft® Digital Media Pro Keyboard] on
usb-0000:00:10.3-2/input1
[ 2.024888] Marking TSC unstable due to cpufreq changes
[ 2.584024] Clocksource tsc unstable (delta = -222214091 ns)
[ 4.281970] EXT3 FS on sda1, internal journal
[ 4.743154] kjournald starting. Commit interval 5 seconds
[ 4.743171] EXT3-fs warning: maximal mount count reached, running
e2fsck is recommended
[ 4.743441] EXT3 FS on sda3, internal journal
[ 4.743451] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.791567] Adding 987988k swap on /dev/sda2. Priority:-1 extents:1
across:987988k
[ 15.790778] r8169: eth0: link up
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox