* Re: linux-next: Tree for Aug 24
From: Arnaud Lacombe @ 2011-08-25 4:30 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, LKML
In-Reply-To: <CACqU3MXy6vyeLeTbZ+8OXfMowO2j0avSy6XgYJQ-C9N9YyU3GQ@mail.gmail.com>
Hi,
On Wed, Aug 24, 2011 at 9:38 PM, Arnaud Lacombe <lacombar@gmail.com> wrote:
> Hi,
>
> On Wed, Aug 24, 2011 at 2:04 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>> Hi all,
>>
>> The powerpc allyesconfig build still fails today.
>>
>> Changes since 20110823:
>>
>> New tree: kvmtool
>>
>> The security tree lost its build failure.
>>
>> The ptrace tree gained a build failure (yeaterday) for which I have
>> reveretd a commit.
>>
>> The tty tree gained a build failure so I used the version from
>> next-20110823.
>>
>> The staging tree gained a conflict against the fbdev tree and a build
>> failure for which I reverted a commit.
>>
>> The moduleh tree gained a conflict against the staging tree.
>>
> Quickly testing a new configuration blows up on the following:
>
> console [ttyS0] enabled
> Fast TSC calibration failed
> TSC: Unable to calibrate against PIT
> TSC: No reference (HPET/PMTIMER) available
> Marking TSC unstable due to could not calculate TSC khz
> Calibrating delay loop... 154.88 BogoMIPS (lpj=77440)
> pid_max: default: 32768 minimum: 301
> Mount-cache hash table entries: 512
> CPU: Intel QEMU Virtual CPU version 0.13.0 stepping 03
> BUG: unable to handle kernel paging request at 827bf688
> IP: [<c13945e2>] apply_alternatives+0xc3/0x18a
> *pde = 00000000
> Oops: 0000 [#1] DEBUG_PAGEALLOC
>
> Pid: 0, comm: swapper Not tainted 3.1.0-rc3-next-20110824+ #5 Bochs Bochs
> EIP: 0060:[<c13945e2>] EFLAGS: 00000286 CPU: 0
> EIP is at apply_alternatives+0xc3/0x18a
> EAX: ffffffff EBX: c13df690 ECX: 00000005 EDX: 827bf688
> ESI: 827bf688 EDI: c1367e9e EBP: c1367fa8 ESP: c1367e70
> DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
> Process swapper (pid: 0, ti=c1366000 task=c136c340 task.ti=c1366000)
> Stack:
> 00000002 c137b700 c1142ac0 00000dc6 c1367e9e 8268a422 00000005 827bf688
> c13dffd8 c1367e05 05000086 f6890046 00f69000 c1367eb0 00000086 00000000
> 00000046 c1367ec0 00000046 00000000 c1367edc c101f3cc 00000dd3 00000000
> Call Trace:
> [<c1142ac0>] ? serial8250_start_tx+0xe0/0xe0
> [<c101f3cc>] ? console_unlock+0x10c/0x150
> [<c12ab669>] ? common_interrupt+0x29/0x30
> [<c1023c64>] ? irq_exit+0x54/0x90
> [<c1003a93>] ? do_IRQ+0x43/0xa0
> [<c12ab669>] ? common_interrupt+0x29/0x30
> [<c13954a8>] ? check_fpu+0xae/0xdc
> [<c13946c0>] alternative_instructions+0x17/0x32
> [<c1395567>] check_bugs+0x91/0x93
> [<c138f6bb>] start_kernel+0x28e/0x299
> [<c138f1b7>] ? loglevel+0x1a/0x1a
> [<c138f0b3>] i386_start_kernel+0xb3/0xbb
> Code: ec fe ff ff 8d 0c 0b 89 8d dc fe ff ff 8d 54 13 04 8b bd d8 fe
> ff ff 89 95 e4 fe ff ff 89 b5 e0 fe ff ff 8b 8d e0 fe ff ff 89 d6 <f3>
> a4 80 bd f6 fe ff ff e8 75 17 80 bd ec fe ff ff 05 75 0e 89
> EIP: [<c13945e2>] apply_alternatives+0xc3/0x18a SS:ESP 0068:c1367e70
> CR2: 00000000827bf688
> ---[ end trace 4eaa2a86a8e2da22 ]---
>
> .config attached. I'll try to bisect it.
>
ok, this is a regression in 3.1, continuing bisection...
- Arnaud
^ permalink raw reply
* linux-next: manual merge of the xen tree with the tip tree
From: Stephen Rothwell @ 2011-08-25 4:24 UTC (permalink / raw)
To: Jeremy Fitzhardinge, Xen Devel
Cc: linux-next, linux-kernel, Thomas Gleixner, Ingo Molnar,
H. Peter Anvin, Peter Zijlstra
[-- Attachment #1: Type: text/plain, Size: 493 bytes --]
Hi all,
Today's linux-next merge of the xen tree got a conflict in
arch/x86/include/asm/spinlock.h between a series of commits from the tip
tree and a smaller series of similar commits from the xen tree.
I see that Linus is commenting on these patches at the moment, and its
not easy to resolve the conflicts, so I will just use the xen tree from
next-20110824 for today.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply
* linux-next: build failure after merge of the ptrace tree
From: Stephen Rothwell @ 2011-08-25 4:12 UTC (permalink / raw)
To: Tejun Heo, Oleg Nesterov; +Cc: linux-next, linux-kernel, Matt Fleming
[-- Attachment #1: Type: text/plain, Size: 407 bytes --]
Hi all,
After merging the ptrace tree, today's linux-next build (powerpc
ppc64_defconfig) failed like this:
ERROR: ".set_current_blocked" [fs/autofs4/autofs4.ko] undefined!
Presumably set_current_blocked() needs to be EXPORTed.
I have used the ptrace tree from next-20110824 for today.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply
* Re: [Patch] numa: introduce CONFIG_NUMA_SYSFS for drivers/base/node.c
From: Randy Dunlap @ 2011-08-25 3:50 UTC (permalink / raw)
To: Cong Wang
Cc: Andrew Morton, Stephen Rothwell, gregkh, linux-next, LKML,
linux-mm
In-Reply-To: <4E55C221.8080100@redhat.com>
On Thu, 25 Aug 2011 11:31:45 +0800 Cong Wang wrote:
> 于 2011年08月25日 10:14, Randy Dunlap 写道:
> > On Wed, 24 Aug 2011 11:34:45 +0800 Cong Wang wrote:
> >
> >> Hi, Andrew,
> >>
> >> Do you think my patch below is better?
> >
> > Hi,
> >
> > This causes build errors for me because node.o is not being built:
> >
> > arch/x86/built-in.o: In function `topology_init':
> > topology.c:(.init.text+0x3668): undefined reference to `register_one_node'
> > drivers/built-in.o: In function `unregister_cpu':
> > (.text+0x7aecc): undefined reference to `unregister_cpu_under_node'
> > drivers/built-in.o: In function `register_cpu':
> > (.cpuinit.text+0xc1): undefined reference to `register_cpu_under_node'
>
> Ah, this is because I missed the part in include/linux/node.h. :)
>
> Below is the updated version.
>
> Thanks for testing!
Yes, that works after changing #ifdef defined(...)
to #if defined(...)
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply
* Re: [Patch] numa: introduce CONFIG_NUMA_SYSFS for drivers/base/node.c
From: Cong Wang @ 2011-08-25 3:31 UTC (permalink / raw)
To: Randy Dunlap
Cc: Andrew Morton, Stephen Rothwell, gregkh, linux-next, LKML,
linux-mm
In-Reply-To: <20110824191430.8a908e70.rdunlap@xenotime.net>
[-- Attachment #1: Type: text/plain, Size: 763 bytes --]
于 2011年08月25日 10:14, Randy Dunlap 写道:
> On Wed, 24 Aug 2011 11:34:45 +0800 Cong Wang wrote:
>
>> Hi, Andrew,
>>
>> Do you think my patch below is better?
>
> Hi,
>
> This causes build errors for me because node.o is not being built:
>
> arch/x86/built-in.o: In function `topology_init':
> topology.c:(.init.text+0x3668): undefined reference to `register_one_node'
> drivers/built-in.o: In function `unregister_cpu':
> (.text+0x7aecc): undefined reference to `unregister_cpu_under_node'
> drivers/built-in.o: In function `register_cpu':
> (.cpuinit.text+0xc1): undefined reference to `register_cpu_under_node'
Ah, this is because I missed the part in include/linux/node.h. :)
Below is the updated version.
Thanks for testing!
[-- Attachment #2: n.diff --]
[-- Type: text/plain, Size: 1586 bytes --]
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 99a375a..e382338 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_HAS_DMA) += dma-mapping.o
obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o
obj-$(CONFIG_ISA) += isa.o
obj-$(CONFIG_FW_LOADER) += firmware_class.o
-obj-$(CONFIG_NUMA) += node.o
+obj-$(CONFIG_NUMA_SYSFS) += node.o
obj-$(CONFIG_MEMORY_HOTPLUG_SPARSE) += memory.o
obj-$(CONFIG_SMP) += topology.o
ifeq ($(CONFIG_SYSFS),y)
diff --git a/include/linux/node.h b/include/linux/node.h
index 92370e2..a0cc5f9 100644
--- a/include/linux/node.h
+++ b/include/linux/node.h
@@ -32,7 +32,7 @@ typedef void (*node_registration_func_t)(struct node *);
extern int register_node(struct node *, int, struct node *);
extern void unregister_node(struct node *node);
-#ifdef CONFIG_NUMA
+#ifdef defined(CONFIG_NUMA) && defined(CONFIG_SYSFS)
extern int register_one_node(int nid);
extern void unregister_one_node(int nid);
extern int register_cpu_under_node(unsigned int cpu, unsigned int nid);
diff --git a/mm/Kconfig b/mm/Kconfig
index f2f1ca1..77345e7 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -340,6 +340,16 @@ choice
benefit.
endchoice
+config NUMA_SYSFS
+ bool "Enable NUMA sysfs interface for user-space"
+ depends on NUMA
+ depends on SYSFS
+ default y
+ help
+ This enables NUMA sysfs interface, /sys/devices/system/node/*
+ files, for user-space tools, like numactl. If you have enabled
+ NUMA, probably you also need this one.
+
#
# UP and nommu archs use km based percpu allocator
#
^ permalink raw reply related
* linux-next: manual merge of the pm tree with the arm tree
From: Stephen Rothwell @ 2011-08-25 3:30 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-next, linux-kernel, Jon Medhurst, Russell King
Hi Rafael,
Today's linux-next merge of the pm tree got a conflict in
arch/arm/mach-shmobile/board-ap4evb.c between commit 9b742024026c ("ARM:
mach-shmobile: Setup consistent dma size at boot time") from the arm tree
and commit 2f82df20d71c ("PM: Move clock-related definitions and headers
to separate file") from the pm tree.
Just context changes. I fixed it up (see below) and can carry the fix as
necessary.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --cc arch/arm/mach-shmobile/board-ap4evb.c
index ec8f9d9,4a21a50..0000000
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@@ -42,7 -42,7 +42,8 @@@
#include <linux/leds.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
+#include <linux/dma-mapping.h>
+ #include <linux/pm_clock.h>
#include <media/sh_mobile_ceu.h>
#include <media/sh_mobile_csi2.h>
^ permalink raw reply
* Re: [Patch] numa: introduce CONFIG_NUMA_SYSFS for drivers/base/node.c
From: Randy Dunlap @ 2011-08-25 2:14 UTC (permalink / raw)
To: Cong Wang
Cc: Andrew Morton, Stephen Rothwell, gregkh, linux-next, LKML,
linux-mm
In-Reply-To: <4E547155.8090709@redhat.com>
On Wed, 24 Aug 2011 11:34:45 +0800 Cong Wang wrote:
> Hi, Andrew,
>
> Do you think my patch below is better?
Hi,
This causes build errors for me because node.o is not being built:
arch/x86/built-in.o: In function `topology_init':
topology.c:(.init.text+0x3668): undefined reference to `register_one_node'
drivers/built-in.o: In function `unregister_cpu':
(.text+0x7aecc): undefined reference to `unregister_cpu_under_node'
drivers/built-in.o: In function `register_cpu':
(.cpuinit.text+0xc1): undefined reference to `register_cpu_under_node'
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply
* linux-next: manual merge of the hid tree with the Linus' tree
From: Stephen Rothwell @ 2011-08-25 2:00 UTC (permalink / raw)
To: Jiri Kosina; +Cc: linux-next, linux-kernel, Dan Bastone
Hi Jiri,
Today's linux-next merge of the hid tree got a conflict in
drivers/hid/hid-core.c drivers/hid/hid-ids.h between commit 4a4c879904aa
("HID: add support for new revision of Apple aluminum keyboard") from
Linus' tree and commit f6f554f09c5b ("HID: add MacBookAir4,2 to
hid_have_special_driver[]") from the hid tree.
Just context changes. I fixed it up (see below) and can carry the fix as
necessary.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --cc drivers/hid/hid-core.c
index 242353d,ed0cd09..0000000
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@@ -1340,9 -1356,9 +1356,12 @@@ static const struct hid_device_id hid_h
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
diff --cc drivers/hid/hid-ids.h
index 7d27d2b,171ea8e..0000000
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@@ -109,9 -109,9 +109,12 @@@
#define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245
#define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246
#define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247
+ #define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c
+ #define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d
+ #define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e
+#define USB_DEVICE_ID_APPLE_ALU_REVB_ANSI 0x024f
+#define USB_DEVICE_ID_APPLE_ALU_REVB_ISO 0x0250
+#define USB_DEVICE_ID_APPLE_ALU_REVB_JIS 0x0251
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
^ permalink raw reply
* Re: linux-next: Tree for Aug 24
From: Arnaud Lacombe @ 2011-08-25 1:38 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, LKML
In-Reply-To: <20110824160404.ebad6370aee2cad82a990142@canb.auug.org.au>
[-- Attachment #1: Type: text/plain, Size: 19154 bytes --]
Hi,
On Wed, Aug 24, 2011 at 2:04 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi all,
>
> The powerpc allyesconfig build still fails today.
>
> Changes since 20110823:
>
> New tree: kvmtool
>
> The security tree lost its build failure.
>
> The ptrace tree gained a build failure (yeaterday) for which I have
> reveretd a commit.
>
> The tty tree gained a build failure so I used the version from
> next-20110823.
>
> The staging tree gained a conflict against the fbdev tree and a build
> failure for which I reverted a commit.
>
> The moduleh tree gained a conflict against the staging tree.
>
Quickly testing a new configuration blows up on the following:
console [ttyS0] enabled
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: No reference (HPET/PMTIMER) available
Marking TSC unstable due to could not calculate TSC khz
Calibrating delay loop... 154.88 BogoMIPS (lpj=77440)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Intel QEMU Virtual CPU version 0.13.0 stepping 03
BUG: unable to handle kernel paging request at 827bf688
IP: [<c13945e2>] apply_alternatives+0xc3/0x18a
*pde = 00000000
Oops: 0000 [#1] DEBUG_PAGEALLOC
Pid: 0, comm: swapper Not tainted 3.1.0-rc3-next-20110824+ #5 Bochs Bochs
EIP: 0060:[<c13945e2>] EFLAGS: 00000286 CPU: 0
EIP is at apply_alternatives+0xc3/0x18a
EAX: ffffffff EBX: c13df690 ECX: 00000005 EDX: 827bf688
ESI: 827bf688 EDI: c1367e9e EBP: c1367fa8 ESP: c1367e70
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c1366000 task=c136c340 task.ti=c1366000)
Stack:
00000002 c137b700 c1142ac0 00000dc6 c1367e9e 8268a422 00000005 827bf688
c13dffd8 c1367e05 05000086 f6890046 00f69000 c1367eb0 00000086 00000000
00000046 c1367ec0 00000046 00000000 c1367edc c101f3cc 00000dd3 00000000
Call Trace:
[<c1142ac0>] ? serial8250_start_tx+0xe0/0xe0
[<c101f3cc>] ? console_unlock+0x10c/0x150
[<c12ab669>] ? common_interrupt+0x29/0x30
[<c1023c64>] ? irq_exit+0x54/0x90
[<c1003a93>] ? do_IRQ+0x43/0xa0
[<c12ab669>] ? common_interrupt+0x29/0x30
[<c13954a8>] ? check_fpu+0xae/0xdc
[<c13946c0>] alternative_instructions+0x17/0x32
[<c1395567>] check_bugs+0x91/0x93
[<c138f6bb>] start_kernel+0x28e/0x299
[<c138f1b7>] ? loglevel+0x1a/0x1a
[<c138f0b3>] i386_start_kernel+0xb3/0xbb
Code: ec fe ff ff 8d 0c 0b 89 8d dc fe ff ff 8d 54 13 04 8b bd d8 fe
ff ff 89 95 e4 fe ff ff 89 b5 e0 fe ff ff 8b 8d e0 fe ff ff 89 d6 <f3>
a4 80 bd f6 fe ff ff e8 75 17 80 bd ec fe ff ff 05 75 0e 89
EIP: [<c13945e2>] apply_alternatives+0xc3/0x18a SS:ESP 0068:c1367e70
CR2: 00000000827bf688
---[ end trace 4eaa2a86a8e2da22 ]---
.config attached. I'll try to bisect it.
- Arnaud
> ----------------------------------------------------------------------------
>
> I have created today's linux-next tree at
> git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
> (patches at http://www.kernel.org/pub/linux/kernel/v2.6/next/ ). If you
> are tracking the linux-next tree using git, you should not use "git pull"
> to do so as that will try to merge the new linux-next release with the
> old one. You should use "git fetch" as mentioned in the FAQ on the wiki
> (see below).
>
> You can see which trees have been included by looking in the Next/Trees
> file in the source. There are also quilt-import.log and merge.log files
> in the Next directory. Between each merge, the tree was built with
> a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the
> final fixups (if any), it is also built with powerpc allnoconfig (32 and
> 64 bit), ppc44x_defconfig and allyesconfig (minus
> CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc
> and sparc64 defconfig. These builds also have
> CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and
> CONFIG_DEBUG_INFO disabled when necessary.
>
> Below is a summary of the state of the merge.
>
> We are up to 199 trees (counting Linus' and 28 trees of patches pending
> for Linus' tree), more are welcome (even if they are currently empty).
> Thanks to those who have contributed, and to those who haven't, please do.
>
> Status of my local build tests will be at
> http://kisskb.ellerman.id.au/linux-next . If maintainers want to give
> advice about cross compilers/configs that work, we are always open to add
> more builds.
>
> Thanks to Randy Dunlap for doing many randconfig builds.
>
> There is a wiki covering stuff to do with linux-next at
> http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.
>
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au
>
> $ git checkout master
> $ git reset --hard stable
> Merging origin/master
> Merging fixes/fixes
> Merging kbuild-current/rc-fixes
> Merging arm-current/master
> Merging m68k-current/for-linus
> Merging powerpc-merge/merge
> Merging 52xx-and-virtex-current/powerpc/merge
> Merging sparc-current/master
> Merging scsi-rc-fixes/master
> Merging net-current/master
> Merging sound-current/for-linus
> Merging pci-current/for-linus
> Merging wireless-current/master
> Merging driver-core.current/driver-core-linus
> Merging tty.current/tty-linus
> Merging usb.current/usb-linus
> Merging staging.current/staging-linus
> Merging cpufreq-current/fixes
> Merging input-current/for-linus
> Merging md-current/for-linus
> Merging audit-current/for-linus
> Merging crypto-current/master
> Merging ide-curent/master
> Merging dwmw2/master
> Merging sh-current/sh-fixes-for-linus
> Merging rmobile-current/rmobile-fixes-for-linus
> Merging fbdev-current/fbdev-fixes-for-linus
> Merging devicetree-current/devicetree/merge
> Merging spi-current/spi/merge
> Merging arm/for-next
> Merging arm-lpae/for-next
> CONFLICT (content): Merge conflict in arch/arm/include/asm/pgalloc.h
> CONFLICT (content): Merge conflict in arch/arm/include/asm/pgtable.h
> CONFLICT (content): Merge conflict in arch/arm/include/asm/tlb.h
> Merging arm-soc/for-next
> Merging at91/at91-next
> Merging davinci/davinci-next
> Merging i.MX/for-next
> Merging linux-spec/for-next
> Merging msm/for-next
> CONFLICT (content): Merge conflict in arch/arm/mach-msm/io.c
> Merging omap/for-next
> Merging pxa/for-next
> Merging samsung/next-samsung
> Merging s5p/for-next
> Merging tegra/for-next
> Merging ux500-core/ux500-core
> Merging xilinx/arm-next
> Merging blackfin/for-linus
> Merging cris/for-next
> Merging ia64/test
> Merging m68k/for-next
> Merging m68knommu/for-next
> Merging microblaze/next
> Merging mips/mips-for-linux-next
> Merging openrisc/for-upstream
> Merging parisc/for-next
> Merging powerpc/next
> Merging 4xx/next
> Merging 52xx-and-virtex/powerpc/next
> Merging galak/next
> Merging s390/features
> Merging sh/sh-latest
> Merging rmobile/rmobile-latest
> Merging sparc/master
> Merging tile/master
> Merging unicore32/unicore32
> Merging xtensa/master
> Merging ceph/for-next
> Merging cifs/master
> Merging configfs/linux-next
> Merging ecryptfs/next
> Merging ext3/for_next
> Merging ext4/dev
> Merging fatfs/master
> Merging fuse/for-next
> Merging gfs2/master
> Merging hfsplus/for-next
> Merging jfs/next
> Merging logfs/master
> Merging nfs/linux-next
> Merging nfsd/nfsd-next
> Merging nilfs2/for-next
> Merging ocfs2/linux-next
> Merging omfs/for-next
> Merging squashfs/master
> Merging udf/for_next
> Merging v9fs/for-next
> Merging ubifs/linux-next
> Merging xfs/master
> Merging vfs/for-next
> Merging vfs-scale/vfs-scale-working
> Merging pci/linux-next
> Merging hid/for-next
> Merging quilt/i2c
> Merging bjdooks-i2c/next-i2c
> Merging quilt/jdelvare-hwmon
> Merging hwmon-staging/hwmon-next
> Merging quilt/kernel-doc
> Merging docs/docs-move
> Merging v4l-dvb/master
> Merging kbuild/for-next
> Merging kconfig/for-next
> Merging ide/master
> Merging libata/NEXT
> Merging infiniband/for-next
> Merging acpi/test
> Merging idle-test/idle-test
> Merging powertools/tools-test
> Merging cpupowerutils/master
> Merging ieee1394/for-next
> Merging ubi/linux-next
> Merging dlm/next
> Merging swiotlb/master
> Merging ibft/master
> Merging scsi/master
> Merging iscsi-target/for-next
> Merging slave-dma/next
> Merging async_tx/next
> Merging net/master
> CONFLICT (delete/modify): arch/powerpc/configs/40x/hcu4_defconfig deleted in HEAD and modified in net/master. Version net/master of arch/powerpc/configs/40x/hcu4_defconfig left in tree.
> CONFLICT (content): Merge conflict in drivers/net/Kconfig
> CONFLICT (content): Merge conflict in drivers/net/Makefile
> $ git rm -f arch/powerpc/configs/40x/hcu4_defconfig
> Applying: powerpc: update ppc64_defconfig for net device movement
> Applying: sparc: update sparc32_defconfig for net device movement
> Applying: sparc: update sparc64_defconfig for net device movement
> Merging wireless/master
> Merging bluetooth/master
> Merging mtd/master
> Merging l2-mtd/master
> CONFLICT (content): Merge conflict in drivers/mtd/maps/lantiq-flash.c
> Merging crypto/master
> Merging sound/for-next
> Merging sound-asoc/for-next
> Merging cpufreq/next
> Merging quilt/rr
> Merging input/next
> Merging input-mt/next
> Merging lsm/for-next
> Merging block/for-next
> Merging quilt/device-mapper
> Merging embedded/master
> Merging firmware/master
> Merging pcmcia/master
> Merging battery/master
> Merging leds/for-mm
> CONFLICT (content): Merge conflict in drivers/leds/Kconfig
> Merging backlight/for-mm
> Merging mmc/mmc-next
> Merging kgdb/kgdb-next
> Merging slab/for-next
> Merging uclinux/for-next
> Merging md/for-next
> Merging mfd/for-next
> Merging hdlc/hdlc-next
> Merging drm/drm-next
> Merging fbdev/master
> Merging viafb/viafb-next
> Merging omap_dss2/for-next
> Merging voltage/for-next
> Merging security/next
> CONFLICT (content): Merge conflict in fs/ocfs2/xattr.c
> Merging selinux/master
> Merging lblnet/master
> Merging agp/agp-next
> Merging watchdog/master
> Merging bdev/master
> Merging dwmw2-iommu/master
> Merging cputime/cputime
> Merging osd/linux-next
> Merging jc_docs/docs-next
> Merging nommu/master
> Merging trivial/for-next
> Merging audit/for-next
> Merging pm/linux-next
> CONFLICT (content): Merge conflict in arch/s390/include/asm/thread_info.h
> CONFLICT (content): Merge conflict in drivers/mfd/twl4030-irq.c
> Merging apm/for-next
> Merging fsnotify/for-next
> Merging irda/for-next
> Merging i7core_edac/linux_next
> Merging i7300_edac/linux_next
> CONFLICT (content): Merge conflict in arch/x86/kernel/cpu/mcheck/mce.c
> Merging devicetree/devicetree/next
> CONFLICT (content): Merge conflict in drivers/of/base.c
> Merging spi/spi/next
> Merging gpio/gpio/next
> Merging tip/auto-latest
> CONFLICT (content): Merge conflict in arch/x86/mm/fault.c
> Merging rcu/rcu/next
> Merging kvm/linux-next
> Merging oprofile/for-next
> Merging ptrace/ptrace
> [master 12688b4] Revert "signal: Add block_sigmask() for adding sigmask to current->blocked"
> Merging xen/upstream/xen
> Merging xen-two/linux-next
> Merging xen-pvhvm/linux-next
> Merging edac-amd/for-next
> Merging percpu/for-next
> Merging workqueues/for-next
> Merging sfi/sfi-test
> Merging asm-generic/next
> Merging drivers-x86/linux-next
> Merging hwpoison/hwpoison
> Merging sysctl/master
> Merging namespace/master
> Merging regmap/for-next
> Merging driver-core/driver-core-next
> Merging tty/tty-next
> $ git reset --hard HEAD^
> Merging refs/next/20110823/tty
> Merging usb/usb-next
> Applying: usb: include module.h in the DesignWare USB3 DRD driver
> Merging staging/staging-next
> CONFLICT (content): Merge conflict in drivers/staging/xgifb/XGI_main_26.c
> Merging bkl-config/config
> Merging tmem/linux-next
> Merging writeback/next
> Merging arm-dt/devicetree/arm-next
> Merging moduleh/module.h-split
> CONFLICT (content): Merge conflict in drivers/staging/iio/accel/adis16220_core.c
> CONFLICT (content): Merge conflict in include/linux/dmaengine.h
> Applying: dm: use export.h instead of module.h where possible
> Applying: block: bsg-lib.c needs export.h not module.h
> Applying: PM: EXPORT_SYMBOL needs export.h
> Merging kvmtool/master
> CONFLICT (content): Merge conflict in include/net/9p/9p.h
> Merging scsi-post-merge/merge-base:master
> $ git checkout akpm
> Applying: Expand root=PARTUUID=UUID syntax to support selecting a root partition by
> Applying: This patch makes two changes:
> Applying: On thread exit shm_exit_ns() is called, it uses shm_ids(ns).rw_mutex. It
> Applying: Because of x86-implement-strict-user-copy-checks-for-x86_64.patch
> Applying: When no floppy is found the module code can be released while a timer
> Applying: The parameter's origin type is long. On an i386 architecture, it can
> Applying: Add support for Aspire 1410 BIOS v1.3314. Fixes the following error:
> Applying: This makes the iris driver use the platform API, so it is properly exposed
> Applying: On x86_32 casting the unsigned int result of get_random_int() to long may
> Applying: This new driver replaces the old PCEngines Alix 2/3 LED driver with a new
> Applying: Cc: Ed Wildgoose <git@wildgooses.com>
> Applying: Replace the bubble sort in sanitize_e820_map() with a call to the generic
> Applying: The x86 timer interrupt handler is the only handler not traced in the
> Applying: The current interrupt traces from irq_handler_entry and irq_handler_exit
> Applying: Don't allow everybody to use a modem.
> Applying: The address limit is already set in flush_old_exec() so this
> Applying: A call to va_copy() should always be followed by a call to va_end() in the
> Applying: Don't dereference em if it's NULL or an error pointer.
> Applying: Some messing with error codes to return 0 on out id's and match
> Applying: fb_set_suspend() must be called with the console semaphore held, which
> Applying: hwmon was using an idr with a NULL pointer, so convert to an
> Applying: A straightforward looking use of idr for a device id.
> Applying: The address limit is already set in flush_old_exec() so this
> Applying: The address limit is already set in flush_old_exec() so this
> Applying: Add new check (assert_init) to make sure objects are initialized and
> Applying: del_timer_sync() calls debug_object_assert_init() to assert that a timer
> Applying: ext4_{set,clear}_bit() is defined as __test_and_{set,clear}_bit_le() for
> Applying: The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned,
> Applying: The address limit is already set in flush_old_exec() so those calls to
> Applying: When do pci remove/rescan on system that have more iommus, got
> Applying: The current implementation of dmi_name_in_vendors() is an invitation to
> Applying: For headers that get exported to userland and make use of u32 style
> Applying: Fix sparse warnings of right shift bigger than source value size:
> Applying: We leak in drivers/scsi/aacraid/commctrl.c::aac_send_raw_srb() :
> Applying: Some mangling of errors was necessary to maintain current interface.
> Applying: This does involve additional use of the spin lock in idr.c. Is this an
> Applying: Instead of open coding this function use kstrtoul_from_user() directly.
> Applying: brd_make_request() always returns 0, which doesn't make much sense.
> Applying: The address limit is already set in flush_old_exec() so this assignment of
> Applying: The basic idea behind cross memory attach is to allow MPI programs doing
> Applying: - Add x86_64 specific wire up
> Applying: acct_isolated of compaction uses page_lru_base_type which returns only
> Applying: Change ISOLATE_XXX macro with bitwise isolate_mode_t type. Normally,
> Applying: In async mode, compaction doesn't migrate dirty or writeback pages. So,
> Applying: In __zone_reclaim case, we don't want to shrink mapped page. Nonetheless,
> Applying: unmap_and_move() is one a big messy function. Clean it up.
> Applying: radix_tree_tag_get()'s BUG (when it sees a tag after saw_unset_tag) was
> Applying: per-task block plug can reduce block queue lock contention and increase
> Applying: The tracing ring-buffer used this function briefly, but not anymore.
> Applying: After selecting a task to kill, the oom killer iterates all processes and
> Applying: Remove PageSwapBacked (!page_is_file_cache) cases from
> Applying: Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Applying: The current implementation of the /dev/hpet driver couples opening the
> Applying: smp_call_function() only lets all other CPUs execute a specific function,
> Applying: auto_demotion_disable is called only for online CPUs. For hotplugged
> Applying: Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning:
> Applying: Strict user copy checks are only really supported on x86_32 even though
> Applying: The help text for this config is duplicated across the x86, parisc, and
> Applying: s/lib-/obj-/ for usercopy.o
> Applying: After an "unexpected" reboot, I found this Oops in my logs:
> Applying: In the move of the lis3 driver, the hp_accel.c file got dropped from the
> Applying: Add axis correction for HP EliteBook 2730p.
> Applying: Add axis correction for HP EliteBook 8540w.
> Applying: Add axis correction for HP ProBook 6555b.
> Applying: Adapt the help text for CONFIG_HP_ACCEL to the move of
> Applying: Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
> Applying: Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
> Applying: Change exported functions to use the device given as parameter
> Applying: Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com>
> Applying: Add V2 of the LED driver for a single timer channel for the TPU hardware
> Applying: Add support for slice by 8 to existing crc32 algorithm. Also modify
> Applying: don't include asm/msr.h
> Applying: This is the one use of an ida that doesn't retry on receiving -EAGAIN.
> Applying: One can get this information from minix/inode.c, but adding the
> Applying: Signed-off-by: Igor Mammedov <imammedo@redhat.com>
> Applying: Force this on for -next/mm testing purposes.
> Applying: Add a proc_dointvec_bool() sysctl handler for cases where the input value
> Applying: Use the new proc_do_intvec_bool() handler for various boolean inputs.
> Applying: Add a proc_dointvec_unsigned() sysctl handler for positive value cases.
> Applying: Cc: Alexey Dobriyan <adobriyan@gmail.com>
> Applying: Use the new proc_do_intvec_unsigned() handler for various unsigned inputs.
> Applying: A default echo function has been provided so it is no longer an error when
> Applying: This client driver allows you to use a GPIO pin as a source for PPS
> Applying: remove unneeded cast of void*
> Applying: Straightforward. As an aside, the ida_init calls are not needed as far as
> Merging akpm
> Applying: do_mounts: remove __init_data from root_wait
> [master 9cba48a] Revert "Staging: add driver for Realtek RTS5139 cardreader"
>
[-- Attachment #2: .config --]
[-- Type: application/octet-stream, Size: 33575 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/i386 3.1.0-rc3 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_FORCED_THREADING=y
# CONFIG_SPARSE_IRQ is not set
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
#
# GCOV-based kernel profiling
#
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_INTEL_MID is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_IRIS is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
CONFIG_M486=y
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_CMPXCHG_LOCAL=y
CONFIG_CMPXCHG_DOUBLE=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_F00F_BUG=y
CONFIG_X86_INVD_BUG=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=1
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
# CONFIG_VM86 is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM_RUNTIME is not set
# CONFIG_ACPI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_EISA_VLB_PRIMING is not set
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_ALIX is not set
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=2048
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_WINBOND_VLB is not set
#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
CONFIG_PATA_LEGACY=y
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
CONFIG_MII=y
# CONFIG_PHYLIB is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_APPLE is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGBVF=y
CONFIG_IXGB=y
CONFIG_IXGBE=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_ELPLUS=y
CONFIG_EL16=y
CONFIG_APRICOT=y
CONFIG_EEXPRESS=y
CONFIG_EEXPRESS_PRO=y
CONFIG_LP486E=y
CONFIG_NI52=y
CONFIG_ZNET=y
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
#
# CAIF transport drivers
#
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_VIRT_DRIVERS is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_FIRMWARE_MEMMAP is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_VMCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
^ permalink raw reply
* Re: linux-next: build warning after merge of the rcu tree
From: Arnaud Lacombe @ 2011-08-25 0:46 UTC (permalink / raw)
To: paulmck; +Cc: Stephen Rothwell, linux-next, linux-kernel
In-Reply-To: <20110824122739.GB2320@linux.vnet.ibm.com>
Hi,
On Wed, Aug 24, 2011 at 8:27 AM, Paul E. McKenney
<paulmck@linux.vnet.ibm.com> wrote:
> On Wed, Aug 24, 2011 at 02:23:37PM +1000, Stephen Rothwell wrote:
>> Hi Paul,
>>
>> After merging the rcu tree, today's linux-next build (powerpc
>> ppc64_defconfig) produced this warning:
>>
>> kernel/rtmutex.c: In function '__rt_mutex_slowlock':
>> kernel/rtmutex.c:605:3: warning: suggest parentheses around assignment used as truth value
>
> There actually already are parentheses around it, and the first pass
> through the loop it is uninitialized at that point. But hey, that
> is gcc for you! Does the patch below cure it?
>
Yes.
- Arnaud
>> Introduced by commit 83841f021d4b ("rcu: Permit rt_mutex_unlock() with
>> irqs disabled").
>
> If it does, then I will fold into that commit.
>
> Thanx, Paul
>
> ------------------------------------------------------------------------
>
> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
>
> diff --git a/kernel/rtmutex.c b/kernel/rtmutex.c
> index 0222e34..2548f44 100644
> --- a/kernel/rtmutex.c
> +++ b/kernel/rtmutex.c
> @@ -602,7 +602,8 @@ __rt_mutex_slowlock(struct rt_mutex *lock, int state,
>
> raw_spin_unlock(&lock->wait_lock);
>
> - if (was_disabled = irqs_disabled())
> + was_disabled = irqs_disabled();
> + if (was_disabled)
> local_irq_enable();
>
> debug_rt_mutex_print_deadlock(waiter);
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
^ permalink raw reply
* Re: linux-next: build failure after merge of the final tree (staging tree related)
From: Stephen Rothwell @ 2011-08-24 23:28 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, edwin_rong
In-Reply-To: <20110824225758.GA3454@kroah.com>
[-- Attachment #1: Type: text/plain, Size: 283 bytes --]
Hi Greg,
On Wed, 24 Aug 2011 15:57:58 -0700 Greg KH <greg@kroah.com> wrote:
>
> Fair enough, I've made this fix in my tree, so it should be good now.
Great, thanks.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply
* Re: linux-next: build warning after merge of the mips tree
From: Stephen Rothwell @ 2011-08-24 23:18 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-next, linux-kernel
In-Reply-To: <20110822104809.451b0e8d7b231d70d73aa256@canb.auug.org.au>
[-- Attachment #1: Type: text/plain, Size: 649 bytes --]
Hi Ralf,
On Mon, 22 Aug 2011 10:48:09 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
>
> On Sun, 21 Aug 2011 09:43:02 +1000 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> >
> > The mips tree today seems like a complete mess. It seem to be some
> > historical tree including commits with commit dates going back to 1994
> > and v1.1.68! Please fix it up as it is unusable in its current form.
>
> Since it hasn't been fixed yet, I have reset the mips tree to be what it
> was in next-20110819.
Still not fixed :-(
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply
* Re: linux-next: build failure after merge of the final tree (staging tree related)
From: Greg KH @ 2011-08-24 22:57 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, linux-kernel, edwin_rong
In-Reply-To: <20110825085420.521cc24fddadc7753dc67199@canb.auug.org.au>
On Thu, Aug 25, 2011 at 08:54:20AM +1000, Stephen Rothwell wrote:
> Hi Greg,
>
> On Wed, 24 Aug 2011 14:16:46 -0700 Greg KH <greg@kroah.com> wrote:
> >
> > To fix it, all we have to do is include linux/vmalloc.h, right? Or is
>
> I would assume so.
>
> > ppc "special" in some other way regarding this call?
>
> I assume it happens just because vmalloc.h is implicitly included by some
> other header file on x86 and not on ppc.
>
> This is why we have "Rule 1" in Documentation/SubmitChecklist. Relying
> on the implicit inclusion of header files is bound to trip us up on some
> architecture or platform or combination of CONFIG options.
Fair enough, I've made this fix in my tree, so it should be good now.
thanks,
greg k-h
^ permalink raw reply
* Re: linux-next: build failure after merge of the final tree (staging tree related)
From: Stephen Rothwell @ 2011-08-24 22:54 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, edwin_rong
In-Reply-To: <20110824211646.GB9707@kroah.com>
[-- Attachment #1: Type: text/plain, Size: 674 bytes --]
Hi Greg,
On Wed, 24 Aug 2011 14:16:46 -0700 Greg KH <greg@kroah.com> wrote:
>
> To fix it, all we have to do is include linux/vmalloc.h, right? Or is
I would assume so.
> ppc "special" in some other way regarding this call?
I assume it happens just because vmalloc.h is implicitly included by some
other header file on x86 and not on ppc.
This is why we have "Rule 1" in Documentation/SubmitChecklist. Relying
on the implicit inclusion of header files is bound to trip us up on some
architecture or platform or combination of CONFIG options.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply
* Re: mmotm 2011-08-24-14-08 uploaded
From: Andrew Morton @ 2011-08-24 22:11 UTC (permalink / raw)
To: Randy Dunlap; +Cc: linux-kernel, linux-mm, linux-fsdevel, linux-next
In-Reply-To: <20110824150433.70e140a6.rdunlap@xenotime.net>
On Wed, 24 Aug 2011 15:04:33 -0700
Randy Dunlap <rdunlap@xenotime.net> wrote:
> On Wed, 24 Aug 2011 14:09:05 -0700 akpm@linux-foundation.org wrote:
>
> > The mm-of-the-moment snapshot 2011-08-24-14-08 has been uploaded to
> >
> > http://userweb.kernel.org/~akpm/mmotm/
> >
> > It contains the following patches against 3.1-rc3:
> > (patches marked "*" will be included in linux-next)
>
> Hi Andrew,
>
> Am I supposed to apply this to linux-next?
Nope. The full series is based on 3.1-rc3. It includes origin.patch
which takes it up to current -linus. And linux-next.patch which takes
it up to today's linux-next.
> I don't get a clean patch(1) against 3.1-rc3.
hm. What broke?
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply
* Re: mmotm 2011-08-24-14-08 uploaded
From: Randy Dunlap @ 2011-08-24 22:08 UTC (permalink / raw)
To: Randy Dunlap; +Cc: akpm, linux-kernel, linux-mm, linux-fsdevel, linux-next
In-Reply-To: <20110824150433.70e140a6.rdunlap@xenotime.net>
On Wed, 24 Aug 2011 15:04:33 -0700 Randy Dunlap wrote:
> On Wed, 24 Aug 2011 14:09:05 -0700 akpm@linux-foundation.org wrote:
>
> > The mm-of-the-moment snapshot 2011-08-24-14-08 has been uploaded to
> >
> > http://userweb.kernel.org/~akpm/mmotm/
> >
> > It contains the following patches against 3.1-rc3:
> > (patches marked "*" will be included in linux-next)
>
> Hi Andrew,
>
> Am I supposed to apply this to linux-next?
> I don't get a clean patch(1) against 3.1-rc3.
My bad. Sorry for the noise.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply
* Re: mmotm 2011-08-24-14-08 uploaded
From: Randy Dunlap @ 2011-08-24 22:04 UTC (permalink / raw)
To: akpm; +Cc: linux-kernel, linux-mm, linux-fsdevel, linux-next
In-Reply-To: <201108242148.p7OLm1lt009191@imap1.linux-foundation.org>
On Wed, 24 Aug 2011 14:09:05 -0700 akpm@linux-foundation.org wrote:
> The mm-of-the-moment snapshot 2011-08-24-14-08 has been uploaded to
>
> http://userweb.kernel.org/~akpm/mmotm/
>
> It contains the following patches against 3.1-rc3:
> (patches marked "*" will be included in linux-next)
Hi Andrew,
Am I supposed to apply this to linux-next?
I don't get a clean patch(1) against 3.1-rc3.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply
* Re: linux-next: Tree for Aug 24 (dynamic_debug)
From: Greg KH @ 2011-08-24 21:09 UTC (permalink / raw)
To: Randy Dunlap
Cc: Jason Baron, Stephen Rothwell, Bart Van Assche, linux-next, LKML
In-Reply-To: <20110824124248.13aa3ed4.rdunlap@xenotime.net>
On Wed, Aug 24, 2011 at 12:42:48PM -0700, Randy Dunlap wrote:
> On Wed, 24 Aug 2011 15:32:45 -0400 Jason Baron wrote:
>
> > On Wed, Aug 24, 2011 at 10:25:51AM -0700, Randy Dunlap wrote:
> > > On Wed, 24 Aug 2011 16:04:04 +1000 Stephen Rothwell wrote:
> > >
> > > > Hi all,
> > >
> > > When CONFIG_NET is not enabled (I see this on i386 builds):
> > >
> > > lib/built-in.o: In function `__dynamic_netdev_dbg':
> > > (.text+0x9fda): undefined reference to `__netdev_printk'
> > >
> > > ---
> > > ~Randy
> > > *** Remember to use Documentation/SubmitChecklist when testing your code ***
> >
> > Ok, we probably want something, like below, although something keeps
> > selecting CONFIG_NET, when I try to unset it, in my .config...so not yet
> > tested, but should work.
>
> Yes, that works. Thanks.
>
> Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Nice.
Jason, care to resend this, with a proper signed-off-by, so that I can
apply it to fix this build error?
thanks
greg k-h
^ permalink raw reply
* Re: linux-next: build failure after merge of the final tree (staging tree related)
From: Greg KH @ 2011-08-24 21:16 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, linux-kernel, edwin_rong
In-Reply-To: <20110824154741.3cbe03b403b646e2a99d63a2@canb.auug.org.au>
On Wed, Aug 24, 2011 at 03:47:41PM +1000, Stephen Rothwell wrote:
> Hi ,
>
> After merging the final tree, today's linux-next build (powerpc
> allyesconfig) failed like this:
>
> drivers/staging/rts5139/rts51x_scsi.c: In function 'inquiry':
> drivers/staging/rts5139/rts51x_scsi.c:498:2: error: implicit declaration of function 'vmalloc'
> drivers/staging/rts5139/xd.c: In function 'xd_init_l2p_tbl':
> drivers/staging/rts5139/xd.c:745:2: error: implicit declaration of function 'vmalloc'
> drivers/staging/rts5139/xd.c: In function 'free_zone':
> drivers/staging/rts5139/xd.c:771:3: error: implicit declaration of function 'vfree'
> drivers/staging/rts5139/ms.c: In function 'ms_init_l2p_tbl':
> drivers/staging/rts5139/ms.c:2214:2: error: implicit declaration of function 'vmalloc'
> drivers/staging/rts5139/ms.c:2257:3: error: implicit declaration of function 'vfree'
>
> Caused by commit 1dac4186bcc6 ("Staging: add driver for Realtek RTS5139
> cardreader").
>
> I have reverted that commit for today.
To fix it, all we have to do is include linux/vmalloc.h, right? Or is
ppc "special" in some other way regarding this call?
thanks,
greg k-h
^ permalink raw reply
* mmotm 2011-08-24-14-08 uploaded
From: akpm @ 2011-08-24 21:09 UTC (permalink / raw)
To: mm-commits, linux-kernel, linux-mm, linux-fsdevel, linux-next
The mm-of-the-moment snapshot 2011-08-24-14-08 has been uploaded to
http://userweb.kernel.org/~akpm/mmotm/
It contains the following patches against 3.1-rc3:
(patches marked "*" will be included in linux-next)
origin.patch
headers_check-is-broken.patch
samples-hidraw-is-busted.patch
* drivers-misc-ptic-add-missing-includes.patch
* alpha-unbreak-osf_setsysinfossi_nvpairs.patch
* alpha-unbreak-osf_setsysinfossi_nvpairs-checkpatch-fixes.patch
* w1-fix-for-loop-in-w1_f29_remove_slave.patch
* maintainers-evgeniy-has-moved.patch
* memcg-pin-execution-to-current-cpu-while-draining-stock.patch
* scripts-get_maintainerpl-update-linuss-git-repository.patch
* checkpatch-add-missing-warn-argument-for-min_t-and-max_t-tests.patch
* drivers-char-msm_smd_pktc-dont-use-is_err.patch
* mm-fix-a-vmscan-warning.patch
* maintainers-paul-menage-has-moved.patch
* kernel-printk-do-not-turn-off-bootconsole-in-printk_late_init-if-keep_bootcon.patch
* vmscan-clear-zone_congested-for-zone-with-good-watermark-resend.patch
* rapidio-fix-use-of-non-compatible-registers.patch
* drivers-video-backlight-ep93xx_blc-add-missing-include-of-linux-moduleh.patch
* leds-add-missing-include-of-linux-moduleh.patch
* memcg-make-oom_lock-0-and-1-based-rather-than-coutner.patch
* backlight-add-a-callback-notify_after-for-backlight-control.patch
* backlight-fix-module-alias-prefix-for-adp8870_bl.patch
* drivers-misc-fsa9480-fix-a-leak-of-the-irq-during-init-failure.patch
* drivers-misc-ab8500-pwmc-fix-modalias.patch
* cris-add-arch-cris-include-asm-serialh.patch
* drivers-leds-leds-bd2802c-bd2802_unregister_led_classdev-should-unregister-all-registered-leds.patch
linux-next.patch
i-need-old-gcc.patch
arch-alpha-kernel-systblss-remove-debug-check.patch
* mm-mempolicyc-make-copy_from_user-provably-correct.patch
* floppy-use-del_timer_sync-in-init-cleanup.patch
* drm-fix-kconfig-unmet-dependency-warning.patch
* sched-fix-a-memory-leak-in-__sdt_free.patch
* kernel-timec-change-jiffies_to_clock_t-input-parameters-type-to-unsigned-long.patch
* readlinkat-ensure-we-return-enoent-for-the-empty-pathname-for-normal-lookups.patch
* acerhdf-add-support-for-aspire-1410-bios-v13314.patch
* arch-x86-platform-iris-irisc-register-a-platform-device-and-a-platform-driver.patch
* x86-fix-mmap-random-address-range.patch
* leds-new-pcengines-alix-system-driver-enables-leds-via-gpio-interface.patch
* leds-new-pcengines-alix-system-driver-enables-leds-via-gpio-interface-fix.patch
* arch-x86-kernel-e820c-eliminate-bubble-sort-from-sanitize_e820_map.patch
* tracex86-add-tracepoint-to-x86-timer-interrupt-handler.patch
* tracex86-add-x86-irq-vector-entry-exit-tracepoints.patch
* arch-arm-mach-ux500-mbox-db5500c-world-writable-sysfs-fifo-file.patch
* arm-exec-remove-redundant-set_fsuser_ds.patch
* audit-always-follow-va_copy-with-va_end.patch
* btrfs-dont-dereference-extent_mapping-if-null.patch
* fsl-rio-correct-iecsr-register-clear-value.patch
* drm-vmwgfx-use-ida_simple_get-for-id-allocation.patch
* drivers-gpu-vga-vgaarbc-add-missing-kfree.patch
* fb-fix-potential-deadlock-between-lock_fb_info-and-console_lock.patch
cyber2000fb-avoid-palette-corruption-at-higher-clocks.patch
* hwmon-convert-idr-to-ida-and-use-ida_simple-interface.patch
* drivers-hwmon-hwmonc-convert-idr-to-ida-and-use-ida_simple_get.patch
* cputime-clean-up-cputime_to_usecs-and-usecs_to_cputime-macros.patch
* tick-fix-update_ts_time_stat-idle-accounting.patch
* nohz-do-not-update-idle-iowait-counters-from-get_cpu_idleiowait_time_us-if-not-asked.patch
* proc-consider-no_hz-when-printing-idle-and-iowait-times.patch
* ia64-exec-remove-redundant-set_fsuser_ds.patch
* unicore32-exec-remove-redundant-set_fsuser_ds.patch
btusb-patch-add_apple_macbookpro62.patch
* debugobjects-extend-debugobjects-to-assert-that-an-object-is-initialized.patch
* kernel-timerc-use-debugobjects-to-catch-deletion-of-uninitialized-timers.patch
* ext4-use-proper-little-endian-bitops.patch
* ocfs2-avoid-unaligned-access-to-dqc_bitmap.patch
* parisc-exec-remove-redundant-set_fsuser_ds.patch
* pci-dmar-update-dmar-units-devices-list-during-hotplug.patch
* drivers-firmware-dmi_scanc-make-dmi_name_in_vendors-more-focused.patch
* kernel-rtmutexc-fix-warning-improve-coding-style.patch
* scsi-fix-a-header-to-include-linux-typesh.patch
* drivers-scsi-megaraidc-fix-sparse-warnings.patch
* drivers-scsi-aacraid-commctrlc-fix-mem-leak-in-aac_send_raw_srb.patch
* drivers-scsi-sdc-use-ida_simple_get-and-ida_simple_remove-in-place-of-boilerplate-code.patch
* drivers-scsi-osd-osd_uldc-use-ida_simple_get-to-handle-id.patch
* drivers-scsi-sgc-convert-to-kstrtoul_from_user.patch
* drivers-block-brdc-make-brd_make_request-return-error-code.patch
drivers-block-loopc-emit-uevent-on-auto-release.patch
* sparc-exec-remove-redundant-addr_limit-assignment.patch
* drivers-staging-rts5139-rts51x_scsic-needs-vmalloch.patch
* drivers-staging-rts5139-xdc-needs-vmalloch.patch
* drivers-staging-rts5139-msc-needs-vmalloch.patch
* slab-add-taint-flag-outputting-to-debug-paths.patch
* slub-add-taint-flag-outputting-to-debug-paths.patch
mm.patch
* cross-memory-attach-v3.patch
* cross-memory-attach-update.patch
* cross-memory-attach-v4.patch
* mm-compaction-trivial-clean-up-in-acct_isolated.patch
* mm-change-isolate-mode-from-define-to-bitwise-type.patch
* mm-compaction-make-isolate_lru_page-filter-aware.patch
* mm-zone_reclaim-make-isolate_lru_page-filter-aware.patch
* mm-migration-clean-up-unmap_and_move.patch
* radix_tree-clean-away-saw_unset_tag-leftovers.patch
* vmscan-add-block-plug-for-page-reclaim.patch
* mm-page-writebackc-make-determine_dirtyable_memory-static-again.patch
* oom-avoid-killing-kthreads-if-they-assume-the-oom-killed-threads-mm.patch
* tmpfs-add-tmpfs-to-the-kconfig-prompt-to-make-it-obvious.patch
* mm-output-a-list-of-loaded-modules-when-we-hit-bad_page.patch
* mm-vmscan-fix-force-scanning-small-targets-without-swap.patch
* mm-vmscan-fix-force-scanning-small-targets-without-swap-fix.patch
* mm-vmscan-drop-nr_force_scan-from-get_scan_count.patch
* mm-distinguish-between-mlocked-and-pinned-pages.patch
* mm-add-comments-to-explain-mm_struct-fields.patch
* mm-add-comments-to-explain-mm_struct-fields-fix.patch
* mm-vmscan-do-not-writeback-filesystem-pages-in-direct-reclaim.patch
* mm-vmscan-remove-dead-code-related-to-lumpy-reclaim-waiting-on-pages-under-writeback.patch
* xfs-warn-if-direct-reclaim-tries-to-writeback-pages.patch
* ext4-warn-if-direct-reclaim-tries-to-writeback-pages.patch
* mm-vmscan-do-not-writeback-filesystem-pages-in-kswapd-except-in-high-priority.patch
* mm-vmscan-throttle-reclaim-if-encountering-too-many-dirty-pages-under-writeback.patch
* mm-vmscan-immediately-reclaim-end-of-lru-dirty-pages-when-writeback-completes.patch
* vmscan-count-pages-into-balanced-for-zone-with-good-watermark.patch
* mm-debug-pageallocc-use-plain-__ratelimit-instead-of-printk_ratelimit.patch
* lib-stringc-introduce-memchr_inv.patch
* mm-debug-pageallocc-use-memchr_inv.patch
* vmscan-fix-initial-shrinker-size-handling.patch
* vmscan-use-atomic-long-for-shrinker-batching.patch
* vmscan-use-atomic-long-for-shrinker-batching-fix.patch
* mm-avoid-null-pointer-access-in-vm_struct-via-proc-vmallocinfo.patch
* vmscan-promote-shared-file-mapped-pages.patch
* vmscan-activate-executable-pages-after-first-usage.patch
* memblock-add-memblock_start_of_dram.patch
* memblock-add-no_bootmem-config-symbol.patch
* mremap-check-for-overflow-using-deltas.patch
* mremap-avoid-sending-one-ipi-per-page.patch
* thp-mremap-support-and-tlb-optimization.patch
* thp-mremap-support-and-tlb-optimization-fix.patch
* thp-mremap-support-and-tlb-optimization-fix-fix.patch
* thp-mremap-support-and-tlb-optimization-fix-fix-fix.patch
* drivers-base-inodec-let-vmstat_text-be-optional.patch
* drivers-base-inodec-let-vmstat_text-be-optional-fix.patch
* selinuxfs-remove-custome-hex_to_bin.patch
* include-linux-securityh-fix-security_inode_init_security-arg.patch
frv-duplicate-output_buffer-of-e03.patch
frv-duplicate-output_buffer-of-e03-checkpatch-fixes.patch
* hpet-factor-timer-allocate-from-open.patch
* intel_idle-fix-api-misuse.patch
* intel_idle-disable-auto_demotion-for-hotplugged-cpus.patch
* kprobes-silence-debug_strict_user_copy_checks=y-warning.patch
* x86-implement-strict-user-copy-checks-for-x86_64.patch
* consolidate-config_debug_strict_user_copy_checks.patch
* consolidate-config_debug_strict_user_copy_checks-fix.patch
* lis3lv02d-avoid-divide-by-zero-due-to-unchecked.patch
* lis3-update-maintainer-information.patch
* lis3-add-support-for-hp-elitebook-2730p.patch
* lis3-add-support-for-hp-elitebook-8540w.patch
* hp_accel-add-hp-probook-655x.patch
* config_hp_accel-fix-help-text.patch
* lis3-free-regulators-if-probe-fails.patch
* lis3-change-naming-to-consistent.patch
* lis3-change-exported-function-to-use-given.patch
* lis3-remove-the-references-to-the-global-variable-in-core-driver.patch
* printk-add-module-parameter-ignore_loglevel-to-control-ignore_loglevel.patch
* printk-add-module-parameter-ignore_loglevel-to-control-ignore_loglevel-fix.patch
* printk-add-console_suspend-module-parameter.patch
* fs-nameic-remove-unused-getname_flags.patch
fcntlf_setfl-allow-setting-of-o_sync.patch
* leds-renesas-tpu-led-driver-v2.patch
* leds-renesas-tpu-led-driver-v2-fix.patch
* drivers-leds-led-triggersc-fix-memory-leak.patch
leds-route-kbd-leds-through-the-generic-leds-layer.patch
leds-route-kbd-leds-through-the-generic-leds-layer-fix.patch
* lib-kstrtox-common-code-between-kstrto-and-simple_strto-functions.patch
* lib-crc-add-slice-by-8-algorithm-to-crc32c.patch
* lib-crc-add-slice-by-8-algorithm-to-crc32c-fix.patch
* epoll-fix-spurious-lockdep-warnings.patch
lib-hexdumpc-make-hex2bin-return-the-updated-src-address.patch
fs-binfmt_miscc-use-kernels-hex_to_bin-method.patch
fs-binfmt_miscc-use-kernels-hex_to_bin-method-fix.patch
fs-binfmt_miscc-use-kernels-hex_to_bin-method-fix-fix.patch
* oprofilefs-handle-zero-length-writes.patch
* drivers-rtc-classc-convert-idr-to-ida-and-use-ida_simple_get.patch
* minix-describe-usage-of-different-magic-numbers.patch
* memcg-rename-mem-variable-to-memcg.patch
* memcg-fix-oom-schedule_timeout.patch
* memcg-use-vzalloc-instead-of-vmalloc.patch
* memcg-replace-ss-id_lock-with-a-rwlock.patch
* memcg-do-not-expose-uninitialized-mem_cgroup_per_node-to-world.patch
* memcg-remove-unneeded-preempt_disable.patch
* procfs-report-eisdir-when-reading-sysctl-dirs-in-proc.patch
* ipc-introduce-shm_rmid_forced-sysctl-testing.patch
* init-add-root=partuuid=uuid-partnroff=%d-support.patch
* init-add-root=partuuid=uuid-partnroff=%d-support-fix.patch
* drivers-rapidio-rio-scanc-use-discovered-bit-to-test-if-enumeration-is-complete.patch
* rapidio-add-mport-driver-for-tsi721-bridge.patch
* sysctl-make-config_sysctl_syscall-default-to-n.patch
* nbd-use-task_pid_nr-to-get-current-pid.patch
* nbd-replace-sysfs_create_file-with-device_create_file.patch
* nbd-replace-printk-kern_err-with-dev_err.patch
* nbd-lower-the-loglevel-of-an-error-message.patch
* nbd-replace-some-printk-with-dev_warn-and-dev_info.patch
* nbd-replace-some-printk-with-dev_warn-and-dev_info-checkpatch-fixes.patch
* pps-default-echo-function.patch
* pps-new-client-driver-using-gpio.patch
* pps-new-client-driver-using-gpio-fix.patch
scatterlist-new-helper-functions.patch
scatterlist-new-helper-functions-update.patch
scatterlist-new-helper-functions-update-fix.patch
memstick-add-support-for-legacy-memorysticks.patch
memstick-add-support-for-legacy-memorysticks-fix.patch
memstick-add-support-for-legacy-memorysticks-update-2.patch
* w1-ds2760-and-ds2780-use-ida-for-id-and-ida_simple_get-to-get-it.patch
* drivers-power-ds2780_batteryc-create-central-point-for-calling-w1-interface.patch
* drivers-power-ds2780_batteryc-add-a-nolock-function-to-w1-interface.patch
* drivers-power-ds2780_batteryc-fix-deadlock-upon-insertion-and-removal.patch
kexec-remove-kmsg_dump_kexec.patch
make-sure-nobodys-leaking-resources.patch
journal_add_journal_head-debug.patch
releasing-resources-with-children.patch
make-frame_pointer-default=y.patch
mutex-subsystem-synchro-test-module.patch
mutex-subsystem-synchro-test-module-fix.patch
slab-leaks3-default-y.patch
put_bh-debug.patch
add-debugging-aid-for-memory-initialisation-problems.patch
workaround-for-a-pci-restoring-bug.patch
prio_tree-debugging-patch.patch
single_open-seq_release-leak-diagnostics.patch
add-a-refcount-check-in-dput.patch
memblock-add-input-size-checking-to-memblock_find_region.patch
memblock-add-input-size-checking-to-memblock_find_region-fix.patch
^ permalink raw reply
* Re: linux-next: Tree for Aug 24 (dynamic_debug)
From: Randy Dunlap @ 2011-08-24 19:42 UTC (permalink / raw)
To: Jason Baron; +Cc: Stephen Rothwell, Bart Van Assche, linux-next, LKML, greg
In-Reply-To: <20110824193244.GA2540@redhat.com>
On Wed, 24 Aug 2011 15:32:45 -0400 Jason Baron wrote:
> On Wed, Aug 24, 2011 at 10:25:51AM -0700, Randy Dunlap wrote:
> > On Wed, 24 Aug 2011 16:04:04 +1000 Stephen Rothwell wrote:
> >
> > > Hi all,
> >
> > When CONFIG_NET is not enabled (I see this on i386 builds):
> >
> > lib/built-in.o: In function `__dynamic_netdev_dbg':
> > (.text+0x9fda): undefined reference to `__netdev_printk'
> >
> > ---
> > ~Randy
> > *** Remember to use Documentation/SubmitChecklist when testing your code ***
>
> Ok, we probably want something, like below, although something keeps
> selecting CONFIG_NET, when I try to unset it, in my .config...so not yet
> tested, but should work.
Yes, that works. Thanks.
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
> Thanks,
>
> -Jason
>
>
> diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
> index ee3b9ba..e4760de 100644
> --- a/lib/dynamic_debug.c
> +++ b/lib/dynamic_debug.c
> @@ -504,6 +504,8 @@ int __dynamic_dev_dbg(struct _ddebug *descriptor,
> }
> EXPORT_SYMBOL(__dynamic_dev_dbg);
>
> +#ifdef CONFIG_NET
> +
> int __dynamic_netdev_dbg(struct _ddebug *descriptor,
> const struct net_device *dev, const char *fmt, ...)
> {
> @@ -528,6 +530,8 @@ int __dynamic_netdev_dbg(struct _ddebug *descriptor,
> }
> EXPORT_SYMBOL(__dynamic_netdev_dbg);
>
> +#endif
> +
> static __initdata char ddebug_setup_string[1024];
> static __init int ddebug_setup_query(char *str)
> {
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply
* Re: linux-next: Tree for Aug 24 (dynamic_debug)
From: Jason Baron @ 2011-08-24 19:32 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Stephen Rothwell, Bart Van Assche, linux-next, LKML, greg
In-Reply-To: <20110824102551.8fc076b5.rdunlap@xenotime.net>
On Wed, Aug 24, 2011 at 10:25:51AM -0700, Randy Dunlap wrote:
> On Wed, 24 Aug 2011 16:04:04 +1000 Stephen Rothwell wrote:
>
> > Hi all,
>
> When CONFIG_NET is not enabled (I see this on i386 builds):
>
> lib/built-in.o: In function `__dynamic_netdev_dbg':
> (.text+0x9fda): undefined reference to `__netdev_printk'
>
> ---
> ~Randy
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
Ok, we probably want something, like below, although something keeps
selecting CONFIG_NET, when I try to unset it, in my .config...so not yet
tested, but should work.
Thanks,
-Jason
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index ee3b9ba..e4760de 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -504,6 +504,8 @@ int __dynamic_dev_dbg(struct _ddebug *descriptor,
}
EXPORT_SYMBOL(__dynamic_dev_dbg);
+#ifdef CONFIG_NET
+
int __dynamic_netdev_dbg(struct _ddebug *descriptor,
const struct net_device *dev, const char *fmt, ...)
{
@@ -528,6 +530,8 @@ int __dynamic_netdev_dbg(struct _ddebug *descriptor,
}
EXPORT_SYMBOL(__dynamic_netdev_dbg);
+#endif
+
static __initdata char ddebug_setup_string[1024];
static __init int ddebug_setup_query(char *str)
{
^ permalink raw reply related
* Re: linux-next: Tree for Aug 24 (dynamic_debug)
From: Randy Dunlap @ 2011-08-24 17:25 UTC (permalink / raw)
To: Stephen Rothwell, Jason Baron, Bart Van Assche; +Cc: linux-next, LKML
In-Reply-To: <20110824160404.ebad6370aee2cad82a990142@canb.auug.org.au>
On Wed, 24 Aug 2011 16:04:04 +1000 Stephen Rothwell wrote:
> Hi all,
When CONFIG_NET is not enabled (I see this on i386 builds):
lib/built-in.o: In function `__dynamic_netdev_dbg':
(.text+0x9fda): undefined reference to `__netdev_printk'
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply
* Re: linux-next: build failure after merge of the final tree (ptrace tree related)
From: Oleg Nesterov @ 2011-08-24 15:16 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Tejun Heo, linux-next, linux-kernel, Matt Fleming, David Miller
In-Reply-To: <20110823160309.112ad0f4922be8605b61c8dd@canb.auug.org.au>
Hi Stephen,
sorry for delay.
On 08/23, Stephen Rothwell wrote:
> Hi all,
>
> After merging the final tree, today's linux-next build (sparc64 defconfig)
> failed like this:
>
> kernel/signal.c: In function 'block_sigmask':
> kernel/signal.c:2333:26: error: 'SA_NODEFER' undeclared (first use in this function)
>
> Caused by commit 932e5a25b9cf ("signal: Add block_sigmask() for adding
> sigmask to current->blocked").
Yes. My bad. I've reset this commit.
> Sparc seems to use SA_NOMASK in the
> equivalent bit of code and has no SA_NODEFER definition.
Yes, I'll push the updated patch(es).
Thanks!
Oleg.
^ permalink raw reply
* Re: linux-next tree addition request (fbdev)
From: Stephen Rothwell @ 2011-08-24 14:33 UTC (permalink / raw)
To: Florian Tobias Schandinat
Cc: linux-next, linux-fbdev@vger.kernel.org, Paul Mundt
In-Reply-To: <4E54FF5E.5050308@gmx.de>
[-- Attachment #1: Type: text/plain, Size: 1062 bytes --]
Hi Florian,
On Wed, 24 Aug 2011 13:40:46 +0000 Florian Tobias Schandinat <FlorianSchandinat@gmx.de> wrote:
>
> can you please add
>
> git://github.com/schandinat/linux-2.6.git fbdev-next
>
> to linux-next. It collects patches for the frame buffer subsystem.
> Can you please add the linux-fbdev@vger.kernel.org mailing list as additional
> contact for warnings/errors/problems?
>
> You probably want to drop Paul's fbdev branches as they contain some outdated
> patches that will conflict with the newer versions.
OK, Paul is still listed as the frame buffer subsystem maintainer, so I
will need an Ack from him. When I get that, I will replace his tree with
yours. I assume someone will update the MAINTAINERS file.
I also have another tree from Paul (called fbdev-current) that contained
fixes for Linus' current release. I also assume that that tree will be
dropped (unless you have a new version of that as well).
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox