* linux-next: Tree for Feb 28
From: Stephen Rothwell @ 2012-02-28 6:33 UTC (permalink / raw)
To: linux-next; +Cc: LKML
[-- Attachment #1: Type: text/plain, Size: 45462 bytes --]
Hi all,
Changes since 20120227:
My fixes tree contains:
x86, efi: Fix unaligned access and endian issues
The pci tree still has its build failure for which I applied a patch.
The net-next tree lost its conflict.
The devicetree tree gained a conflict against the powerpc tree.
The uprobes tree lost several conflicts but gained another against Linus' tree.
The regmap tree lost its build failure.
The driver-core tree gained a conflict against the pci tree.
The tty tree lost its build failure.
The staging tree still has its build failure for which I reverted a commit.
The moduleh tree lost its build failure.
The irqdomain tree gained a conflict against the powerpc tree.
The akpm tree lost its build failure and several patches that turned up
elsewhere and gained a conflict against the tip tree. It also gained a
build failure for which I applied a merge fix patch.
----------------------------------------------------------------------------
I have created today's linux-next tree at
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/next/ ). If you
are tracking the linux-next tree using git, you should not use "git pull"
to do so as that will try to merge the new linux-next release with the
old one. You should use "git fetch" as mentioned in the FAQ on the wiki
(see below).
You can see which trees have been included by looking in the Next/Trees
file in the source. There are also quilt-import.log and merge.log files
in the Next directory. Between each merge, the tree was built with
a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the
final fixups (if any), it is also built with powerpc allnoconfig (32 and
64 bit), ppc44x_defconfig and allyesconfig (minus
CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc
and sparc64 defconfig. These builds also have
CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and
CONFIG_DEBUG_INFO disabled when necessary.
Below is a summary of the state of the merge.
We are up to 182 trees (counting Linus' and 26 trees of patches pending
for Linus' tree), more are welcome (even if they are currently empty).
Thanks to those who have contributed, and to those who haven't, please do.
Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give
advice about cross compilers/configs that work, we are always open to add
more builds.
Thanks to Randy Dunlap for doing many randconfig builds.
There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
$ git checkout master
$ git reset --hard stable
Merging origin/master (5ffca28 Merge git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs)
Merging fixes/master (474ee24 x86, efi: Fix unaligned access and endian issues)
Merging kbuild-current/rc-fixes (42f1c01 coccicheck: change handling of C={1,2} when M= is set)
Merging arm-current/fixes (7e55d05 ARM: 7339/1: amba/serial.h: Include types.h for resolving dependency of type bool)
Merging m68k-current/for-linus (2a35350 m68k: Fix assembler constraint to prevent overeager gcc optimisation)
Merging powerpc-merge/merge (c2ea377 Merge remote-tracking branch 'origin/master' into merge)
Merging 52xx-and-virtex-current/powerpc/merge (c49f878 dtc/powerpc: remove obsolete .gitignore entries)
Merging sparc/master (e51e07e sparc32: forced setting of mode of sun4m per-cpu timers)
Merging scsi-rc-fixes/master (41f8ad7 [SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576)
Merging net/master (203738e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net)
Merging sound-current/for-linus (87c9e7d ALSA: azt3328 - Fix NULL ptr dereference on cards without OPL3)
Merging pci-current/for-linus (1cc1c96 PCI: fix memleak when ACPI _CRS is not used.)
Merging wireless/master (2b0a53d brcm80211: smac: only print block-ack timeout message at trace level)
Merging driver-core.current/driver-core-linus (b01543d Linux 3.3-rc4)
Merging tty.current/tty-linus (f21c6d4 tty/powerpc: early udbg consoles can't be modules)
Merging usb.current/usb-linus (45196ce Merge tag 'usb-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb)
Merging staging.current/staging-linus (b01543d Linux 3.3-rc4)
Merging char-misc.current/char-misc-linus (b01543d Linux 3.3-rc4)
Merging cpufreq-current/fixes (5983fe2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net)
Merging input-current/for-linus (f3761c0 Input: twl4030-vibra - use proper guard for PM methods)
Merging md-current/for-linus (db91ff5 md: two small fixes to handling interrupt resync.)
Merging audit-current/for-linus (c158a35 audit: no leading space in audit_log_d_path prefix)
Merging crypto-current/master (f2ea0f5 crypto: sha512 - use standard ror64())
Merging ide/master (0ab3d8b cy82c693: fix PCI device selection)
Merging dwmw2/master (244dc4e Merge git://git.infradead.org/users/dwmw2/random-2.6)
Merging devicetree-current/devicetree/merge (2261cc6 dt: add empty of_find_compatible_node function)
Merging spi-current/spi/merge (c88db23 spi-topcliff-pch: rename pch_spi_pcidev to pch_spi_pcidev_driver)
Merging gpio-current/gpio/merge (7e3a70f gpio: Add missing spin_lock_init in gpio-ml-ioh driver)
Merging arm/for-next (5742ee4 Merge branch 'devel-stable' into for-next)
Merging arm-perf/for-next/perf (cdd2a5b Merge branches 'perf/updates' and 'perf/fixes' into for-next/perf)
Merging davinci/davinci-next (fe0d422 Linux 3.0-rc6)
Merging samsung/next-samsung (9edb240 ARM: H1940/RX1950: Change default LED triggers)
Merging s5p/for-next (6abb754 Merge branch 'v3.4-for-cjb' into for-next)
Merging tegra/for-next (905bd5e Merge branch 'for-3.4/soc-drivers' into for-next)
CONFLICT (content): Merge conflict in arch/arm/mach-tegra/common.c
Merging xilinx/arm-next (b85a3ef ARM: Xilinx: Adding Xilinx board support)
Merging blackfin/for-linus (e651fe5 Blackfin: wire up new process_vm syscalls)
Merging c6x/for-linux-next (62e37ca Kbuild: Use dtc's -d (dependency) option)
Merging cris/for-next (ea78f5b CRIS: Update documentation)
Merging quilt/hexagon (110b372 Remove unneeded include of version.h from arch/hexagon/include/asm/spinlock_types.h)
CONFLICT (content): Merge conflict in arch/hexagon/Kconfig
Merging ia64/next (454ca60 [IA64] Check return from device_register() in cx_device_register())
Merging m68k/for-next (2a35350 m68k: Fix assembler constraint to prevent overeager gcc optimisation)
Merging m68knommu/for-next (b4cb906 m68knommu: merge common ColdFire QSPI platform setup code)
Merging microblaze/next (8597559 Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6)
Merging mips/mips-for-linux-next (2fea377 Merge branch 'fixes-for-linus' into mips-for-linux-next)
Merging openrisc/for-upstream (754d5c2 openrisc: Set shortest clock event to 100 ticks)
Merging parisc/for-next (98552f9 Merge branch 'fixes' into for-next)
Merging powerpc/next (6c15d7a carma-fpga: fix race between data dumping and DMA callback)
Merging 4xx/next (ef88e39 powerpc: fix compile error with 85xx/p1010rdb.c)
Merging 52xx-and-virtex/powerpc/next (c1395f4 dtc/powerpc: remove obsolete .gitignore entries)
Merging galak/next (ef88e39 powerpc: fix compile error with 85xx/p1010rdb.c)
Merging s390/features (896aea3 [S390] Remove monolithic build option for zcrypt driver.)
Merging sparc-next/master (b409650 arch/sparc/kernel/unaligned_64.c: included linux/bitops.h twice)
Merging tile/master (0c90547 arch/tile: use new generic {enable,disable}_percpu_irq() routines)
Merging unicore32/unicore32 (0994695 Merge branch 'akpm' (aka "Andrew's patch-bomb, take two"))
Merging ceph/for-next (83eb26a ceph: ensure prealloc_blob is in place when removing xattr)
Merging cifs/master (5bccda0 cifs: fix dentry refcount leak when opening a FIFO on lookup)
Merging configfs/linux-next (b930c26 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs)
Merging ecryptfs/next (6cfd4b4 ecryptfs: remove the second argument of k[un]map_atomic())
CONFLICT (content): Merge conflict in fs/ecryptfs/ecryptfs_kernel.h
Merging ext3/for_next (62aa2b5 Linux 3.3-rc2)
Merging ext4/dev (9ee4930 ext4: format flag in dx_probe())
Merging fuse/for-next (03c9693 cuse: implement memory mapping)
Merging gfs2/master (b3e8048 GFS2: Make bd_cmp() static)
Merging logfs/master (203738e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net)
Merging nfs/linux-next (550dd2c Merge branch 'nfs-for-next' into linux-next)
Merging nfsd/nfsd-next (03cfb42 NFSD: Clean up the test_stateid function)
Merging ocfs2/linux-next (9392557 ocfs2: avoid unaligned access to dqc_bitmap)
Merging omfs/for-next (976d167 Linux 3.1-rc9)
Merging squashfs/master (3d4a1c8 Squashfs: fix i_blocks calculation with extended regular files)
Merging v9fs/for-next (208f3c2 net/9p: handle flushed Tclunk/Tremove)
Merging ubifs/linux-next (72d3ef6 UBIFS: do not use inc_link when i_nlink is zero)
Merging xfs/for-next (9006fb9 xfs: split and cleanup xfs_log_reserve)
CONFLICT (content): Merge conflict in fs/xfs/xfs_trans_dquot.c
Merging vfs/for-next (9161999 fs: initial qnx6fs addition)
Merging pci/linux-next (f6330c3 PCI: make acpihp use __pci_remove_bus_device instead)
CONFLICT (content): Merge conflict in arch/mips/pci/pci.c
Applying: powerpc/PCI: fix up for mismatch between resource_size_t and pointer size
Merging hid/for-next (78fcdcc Merge branch 'wacom' into for-next)
Merging quilt/i2c (c3632e0 i2c-i801: Use usleep_range to wait for command completion)
Merging bjdooks-i2c/next-i2c (fc84fe1 Merge branch 'for_3.3/i2c/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into for-33/i2c/omap)
CONFLICT (content): Merge conflict in drivers/i2c/busses/i2c-omap.c
Merging quilt/jdelvare-hwmon (0cac3d6 hwmon: Add MCP3021 ADC driver)
Merging hwmon-staging/hwmon-next (5fa5a62 hwmon: (jc42) Convert to use devm_kzalloc)
Merging quilt/kernel-doc (7e7b32a Update quilt tree location for Documentation/ patches.)
Merging docs/docs-move (5c24d8b Merge branch 'docs/docbook/drm' of git://github.com/mfwitten/linux into docs-move)
Merging v4l-dvb/master (d345066 Merge /home/v4l/v4l/patchwork)
Merging kbuild/for-next (17c0999 Merge branch 'kbuild/misc' into kbuild/for-next)
Merging kconfig/for-next (eae1c36 Merge branch 'kconfig/for-linus-2' into kconfig/for-next)
Merging libata/NEXT (3f1581f sata_fsl: add support for interrupt coalsecing feature)
Merging infiniband/for-next (01b5e3a Merge branches 'cxgb4', 'ehca', 'mad', 'nes', 'qib' and 'srpt' into for-next)
Merging acpi/next (71ad90e ACPICA: Fix regression in FADT revision checks)
Merging ieee1394/for-next (02c68b7 Merge branch 'master' into for-next)
Merging ubi/linux-next (ecaabdb UBI: fix error handling in ubi_scan())
Merging dlm/next (60f98d1 dlm: add recovery callbacks)
Merging scsi/master (50824d6 [SCSI] libsas: async ata-eh)
Merging target-updates/for-next (c0974f8 target: Allow target_submit_tmr interrupt context + pass ABORT_TASK tag)
Merging target-merge/for-next-merge (c0974f8 target: Allow target_submit_tmr interrupt context + pass ABORT_TASK tag)
Merging ibft/linux-next (935a9fe ibft: Fix finding IBFT ACPI table on UEFI)
Merging isci/all (57872c2 Merge branches 'devel' and 'fixes' into all)
CONFLICT (content): Merge conflict in include/scsi/sas_ata.h
CONFLICT (content): Merge conflict in include/scsi/libsas.h
CONFLICT (content): Merge conflict in drivers/scsi/libsas/sas_scsi_host.c
CONFLICT (content): Merge conflict in drivers/scsi/libsas/sas_port.c
CONFLICT (content): Merge conflict in drivers/scsi/libsas/sas_internal.h
CONFLICT (content): Merge conflict in drivers/scsi/libsas/sas_init.c
CONFLICT (content): Merge conflict in drivers/scsi/libsas/sas_expander.c
CONFLICT (content): Merge conflict in drivers/scsi/libsas/sas_event.c
CONFLICT (content): Merge conflict in drivers/scsi/libsas/sas_discover.c
CONFLICT (content): Merge conflict in drivers/scsi/libsas/sas_ata.c
CONFLICT (content): Merge conflict in drivers/scsi/isci/registers.h
Merging slave-dma/next (a1c4601 dmaengine/dw_dmac: Remove unused fields in struct dw_dma_slave)
Merging dmaengine/next (d07a74a dmaengine: fix missing 'cnt' in ?: in dmatest)
Merging net-next/master (5bd4973 gigaset: Use semicolons to terminate statements)
Merging wireless-next/master (e8b461c rt2800pci: Fix 'Error - MCU request failed' during initialization)
Merging bluetooth/master (9b27f35 Bluetooth: Remove duplicated code in l2cap conn req)
Merging mtd/master (3c3e51d Merge ../linux-2.6 to bring in 3.3-rc fixes already merged)
Merging l2-mtd/master (783dbd6 sfc: mtd: Use MTD_FAIL_ADDR_UNKNOWN instead of 0xffffffff)
CONFLICT (content): Merge conflict in drivers/mtd/chips/cfi_cmdset_0002.c
Merging crypto/master (8940426 crypto: twofish-x86_64/i586 - set alignmask to zero)
CONFLICT (content): Merge conflict in arch/arm/mach-tegra/fuse.c
Merging sound/for-next (42109da Merge branch 'topic/jack' into for-next)
Merging sound-asoc/for-next (bf3f0a7 Merge branch 'for-3.4' into asoc-next)
CONFLICT (content): Merge conflict in sound/soc/codecs/wm5100.c
Merging cpufreq/next (6c523c6 [CPUFREQ] EXYNOS: Removed useless headers and codes)
Merging quilt/rr (e94439f virtio: update documentation to v0.9.4 of spec)
Merging input/next (1e5dc05 Input: spear-keyboard - provide thaw and poweroff routines)
Merging input-mt/for-next (7491f3d bcm5974: Add pointer and buttonpad properties)
Merging block/for-next (b3021da Merge branch 'for-3.3/core' into for-next)
Merging quilt/device-mapper (6aed107 Commit unwritten data every second to prevent too much building up. In future we might make the commit interval tunable.)
Merging embedded/master (4744b43 embedded: fix vc_translate operator precedence)
Merging firmware/master (6e03a20 firmware: speed up request_firmware(), v3)
Merging battery/master (913272b Merge git://git.infradead.org/users/cbou/battery-urgent)
Merging mmc/mmc-next (63871af mmc: core: fix regression: set default clock gating delay to 0)
CONFLICT (content): Merge conflict in drivers/mmc/host/atmel-mci.c
Merging kgdb/kgdb-next (880ba69 lib: rename pack_hex_byte() to hex_byte_pack())
Merging slab/for-next (96438bc Merge branch 'slub/cleanups' into for-next)
Merging uclinux/for-next (5e442a4 Revert "proc: fix races against execve() of /proc/PID/fd**")
Merging md/for-next (2a78e32 commit 56a2559bb654a (md/raid10: recognise replacements ...) changed 'run' to set ->replacement or ->rdev depending on the 'Replacement' status if the device, but it didn't remove the old unconditional setting of 'rdev'. So it was largely ineffective.)
Merging mfd/for-next (0e7018c mfd: Use regmap for tps65910 register access.)
Merging drm/drm-next (a02fa39 drm/radeon/kms: reorganize pm callbacks)
Merging fbdev/fbdev-next (327e276 video: s3c-fb: use devm_request_irq())
Merging viafb/viafb-next (c572c8b viafb: NULL dereference on allocation failure in query_edid())
Merging omap_dss2/for-next (9a90168 OMAPDSS: HDMI: Disable DDC internal pull up)
Merging regulator/for-next (aa6e96f Merge branch 'regulator-drivers' into regulator-next)
Merging security/next (b0d5de4 IMA: fix audit res field to indicate 1 for success and 0 for failure)
Merging selinux/master (a9ab18a selinux: include flow.h where used rather than get it indirectly)
Merging lblnet/master (7e27d6e Linux 2.6.35-rc3)
Merging watchdog/linux-next (1776b7d watchdog: fix error in probe() of s3c2410_wdt (reset at booting))
Merging dwmw2-iommu/master (c3b92c8 Linux 3.1)
Merging iommu/next (3ea1e25 Merge branches 'iommu/fixes' and 'arm/tegra' into next)
Merging osd/linux-next (0aa436b exofs: Cap on the memcpy() size)
Merging jc_docs/docs-next (5c050fb docs: update the development process document)
Merging trivial/for-next (73c1e20 mm: fix comment typo of truncate_inode_pages_range)
Merging audit/for-next (dcd6c92 Linux 3.3-rc1)
Merging pm/linux-next (57755b9 PM / Domains: Fix include for PM_GENERIC_DOMAINS=n case)
Merging apm/for-next (b4a133d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm)
Merging fsnotify/for-next (ef9bf3b fanotify: only destroy a mark if both its mask and its ignored_mask are cleared)
Merging edac/linux_next (4d096ca MAINTAINERS: add an entry for Edac Sandy Bridge driver)
Merging edac-amd/for-next (3db1fe2 Merge branch '3.3-edac-dbam' into edac-for-next)
Merging devicetree/devicetree/next (0f22dd3 of: Only compile OF_DYNAMIC on PowerPC pseries and iseries)
CONFLICT (modify/delete): arch/powerpc/platforms/iseries/Kconfig deleted in HEAD and modified in devicetree/devicetree/next. Version devicetree/devicetree/next of arch/powerpc/platforms/iseries/Kconfig left in tree.
$ git rm -f arch/powerpc/platforms/iseries/Kconfig
Merging spi/spi/next (14af60b spi/pl022: Add high priority message pump support)
Merging gpio/gpio/next (daefd89 Merge branch 'for_3.4/gpio/runtime-pm-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next)
CONFLICT (content): Merge conflict in include/linux/mfd/tps65910.h
Merging tip/auto-latest (3dc25e9 Merge branch 'x86/x32' into auto-latest)
CONFLICT (content): Merge conflict in include/net/sock.h
Applying: x86: mark X86_X32_ABI broken for now until I get a better binutils
Merging rcu/rcu/next (1cc8596 rcu: Stop spurious warnings from synchronize_sched_expedited)
Merging cputime/cputime (c3e0ef9 [S390] fix cputime overflow in uptime_proc_show)
Merging uprobes/for-next (1f9eb65 uprobes/core: handle breakpoint and signal step exception.)
CONFLICT (content): Merge conflict in kernel/fork.c
CONFLICT (add/add): Merge conflict in kernel/events/uprobes.c
CONFLICT (content): Merge conflict in kernel/events/Makefile
CONFLICT (add/add): Merge conflict in include/linux/uprobes.h
CONFLICT (add/add): Merge conflict in arch/x86/kernel/uprobes.c
CONFLICT (add/add): Merge conflict in arch/x86/include/asm/uprobes.h
Merging cgroup/for-next (3ce3230 cgroup: Walk task list under tasklist_lock in cgroup_enable_task_cg_list)
Merging kmemleak/kmemleak (d65b4e9 Linux 3.3-rc3)
Merging kvm/linux-next (4b99f72 KVM: mmu_notifier: Flush TLBs before releasing mmu_lock)
Merging oprofile/for-next (b9e7f8e Merge branches 'oprofile/urgent' and 'oprofile/core' into oprofile/master)
CONFLICT (content): Merge conflict in tools/perf/util/header.c
Merging xen/upstream/xen (59e9a6b Merge branch 'upstream/ticketlock-cleanup' into upstream/xen)
CONFLICT (content): Merge conflict in arch/x86/include/asm/cmpxchg.h
Merging xen-two/linux-next (f51330a Merge branch 'stable/for-linus-fixes-3.3' into linux-next)
Merging xen-pvhvm/linux-next (b056b6a xen: suspend: remove xen_hvm_suspend)
Merging percpu/for-next (e920d59 percpu: use raw_local_irq_* in _this_cpu op)
Merging workqueues/for-next (6b3da11 Merge branch 'for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu)
Merging hwpoison/hwpoison (46e387b Merge branch 'hwpoison-hugepages' into hwpoison)
Merging sysctl/master (4e75732 sysctl: Don't call sysctl_follow_link unless we are a link.)
CONFLICT (content): Merge conflict in fs/proc/proc_sysctl.c
Merging regmap/for-next (70157c8 Merge branch 'regmap-sync' into regmap-next)
Merging hsi/for-next (43139a6 HSI: hsi_char: Update ioctl-number.txt)
Merging driver-core/driver-core-next (f6e8a1d w1_bq27000: Only one thread can access the bq27000 at a time.)
CONFLICT (content): Merge conflict in include/linux/pci.h
CONFLICT (content): Merge conflict in drivers/base/cpu.c
Merging tty/tty-next (6623d64 tty: keyboard.c: add uaccess.h to fix a build problem on sparc32)
Merging usb/usb-next (6d161b9 usb-serial: Add support for the Sealevel SeaLINK+8 2038-ROHS device)
Merging staging/staging-next (cd4361c iio: core: constitfy available_scan_mask)
[master fb11e31] Revert "staging: ozwpan: Plumbed in Kconfig and Kbuild"
Merging char-misc/char-misc-next (5aa4d20 char/ramoops: included linux/err.h twice)
Merging arm-soc/for-next (47d8bad Merge branch 'next/fixes-non-critical' into for-next)
CONFLICT (content): Merge conflict in include/linux/virtio_ids.h
Merging tmem/linux-next (b05b561 Merge branch 'devel/frontswap.v13' into linux-next)
Applying: mm: frontswap: update for security_vm_enough_memory API change
Merging writeback/writeback-for-next (977b7e3 writeback: fix dereferencing NULL bdi->dev on trace_writeback_queue)
Merging arm-dt/devicetree/arm-next (ede338f dt: add documentation of ARM dt boot interface)
Merging hwspinlock/linux-next (8b37fcf hwspinlock: add MAINTAINERS entries)
Merging pinctrl/for-next (608f202 Merge branch 'pinctrl-tegra-for-next-diet' into for-next)
Merging moduleh/for-sfr (6f86355 kernel.h: doesn't explicitly use bug.h, so don't include it.)
Merging vhost/linux-next (1e05b62 sh: use the the PCI channels's io_map_base)
Merging kmap_atomic/kmap_atomic (019e9ad feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal)
CONFLICT (content): Merge conflict in drivers/staging/zram/zram_drv.c
CONFLICT (content): Merge conflict in drivers/staging/zcache/zcache-main.c
CONFLICT (content): Merge conflict in drivers/scsi/storvsc_drv.c
CONFLICT (content): Merge conflict in drivers/net/ethernet/intel/e1000e/netdev.c
CONFLICT (content): Merge conflict in Documentation/feature-removal-schedule.txt
Merging modem-shm/for-next (3cff1cc caif_shm: Add CAIF driver for Shared memory for M7400)
Merging memblock/memblock-kill-early_node_map (7bd0b0f memblock: Reimplement memblock allocation using reverse free area iterator)
Merging remoteproc/for-next (e12bc14 remoteproc: s/big switch/lookup table/)
Merging irqdomain/irqdomain/next (280ad7f mfd: twl-core: Add IRQ_DOMAIN dependency)
CONFLICT (content): Merge conflict in arch/powerpc/sysdev/mpic.c
CONFLICT (content): Merge conflict in arch/c6x/Kconfig
CONFLICT (content): Merge conflict in arch/arm/common/gic.c
Merging kvmtool/master (d8a4934 kvm tools, seabios: Add support for SeaBIOS debugging output)
Merging dma-mapping/dma-mapping-next (6cc2bf1 common: DMA-mapping: add NON-CONSISTENT attribute)
Merging ktest/for-next (be405f9 ktest: Add INGORE_ERRORS to ignore warnings in boot up)
Merging scsi-post-merge/merge-base:master ()
$ git checkout akpm
Applying: kmsg_dump: don't run on non-error paths by default
Applying: kprobes: return proper error code from register_kprobe()
Applying: aio: wake up waiters when freeing unused kiocbs
Applying: vfork: introduce complete_vfork_done()
Applying: vfork: make it killable
Applying: coredump_wait: don't call complete_vfork_done()
Applying: vfork: kill PF_STARTING
Applying: hung_task: fix the broken rcu_lock_break() logic
Applying: pps: class_create() returns an ERR_PTR, not NULL
Applying: c2port: class_create() returns an ERR_PTR
Applying: sparsemem/bootmem: catch greater than section size allocations
Applying: net/netfilter/nf_conntrack_netlink.c: fix Oops on container destroy
Applying: acerhdf: add support for Aspire 1410 BIOS v1.3314
Applying: acerhdf: add support for new hardware
Applying: acerhdf: lowered default temp fanon/fanoff values
Applying: arch/x86/platform/iris/iris.c: register a platform device and a platform driver
Applying: x86, olpc-xo15-sci: enable lid close wakeup control through sysfs
Applying: geos: platform driver for Geos and Geos2 single-board computers
Applying: platform-drivers-x86: convert drivers/platform/x86/* to use module_platform_driver()
Applying: drivers/platform/x86/sony-laptop.c: fix scancodes
Applying: platform, x86: kill off Moorestown
Applying: intel_scu_ipc: remove Moorestown support
Applying: platform-x86: intel_mid_thermal: add msic_thermal alias
Applying: platform-x86: intel_mid_thermal: convert to use Intel MSIC API
Applying: platform-x86: intel_mid_thermal: turn off thermistor voltage by default
Applying: intel_mid_powerbtn: use MSIC read/write instead of ipc_scu
Applying: intel_mid_powerbtn: mark irq as IRQF_NO_SUSPEND
Applying: drivers/platform/x86/acer-wmi.c: no wifi rfkill on Lenovo machines
Applying: x86, olpc: add debugfs interface for EC commands
Applying: x86, mm: fix the size calculation of mapping tables
Applying: alix2: supplement driver to include GPIO button support
Applying: x86: net5501: platform driver for Soekris Engineering net5501 single-board computer
Applying: x86: use this_cpu_xxx to replace percpu_xxx funcs
CONFLICT (content): Merge conflict in arch/x86/kernel/nmi_selftest.c
Applying: x86: change percpu_read_stable() to this_cpu_read_stable()
Applying: x86-change-percpu_read_stable-to-this_cpu_read_stable-fix
Applying: x86 PCI: fix identity mapping for sandy bridge
Applying: x86, pci: increase the number of iommus supported to be MAX_IO_APICS
Applying: x86-pci-increase-the-number-of-iommus-supported-to-be-max_io_apics-v2
Applying: x86-pci-increase-the-number-of-iommus-supported-to-be-max_io_apics-v2-fix
Applying: arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file
Applying: arm, exec: remove redundant set_fs(USER_DS)
Applying: arm: use set_current_blocked() and block_sigmask()
Applying: avr32: don't mask signals in the error path
Applying: avr32: use set_current_blocked() in handle_signal/sys_rt_sigreturn
Applying: avr32: use block_sigmask()
Applying: powerpc: use set_current_blocked() and block_sigmask()
Applying: Hexagon: use set_current_blocked() and block_sigmask()
Applying: irqs: fix long-term regression in genirq irq_set_irq_type() handling
Applying: softirq: reduce invoke_softirq() code duplication
Applying: tile: use set_current_blocked() and block_sigmask()
Applying: hrtimers: Special-case zero length sleeps
Applying: cs5535-clockevt: don't ignore MFGPT on SMP-capable kernels
Applying: cs5535-clockevt: allow the MFGPT IRQ to be shared
Applying: hpet: factor timer allocate from open
Applying: ia64: use set_current_blocked() and block_sigmask()
Applying: headers_check: recursively search for linux/types.h inclusion
Applying: microblaze: don't reimplement force_sigsegv()
Applying: microblaze: no need to reset handler if SA_ONESHOT
Applying: microblaze: fix signal masking
Applying: microblaze: use set_current_blocked() and block_sigmask()
Applying: MIPS: use set_current_blocked() and block_sigmask()
Applying: score: don't mask signals if we fail to setup signal stack
Applying: score: use set_current_blocked() and block_sigmask()
Applying: drivers/thermal/thermal_sys.c: fix build warning
Applying: thermal_sys: remove unnecessary line continuations
Applying: thermal_sys: remove obfuscating used-once macros
Applying: thermal_sys: kernel style cleanups
Applying: thermal_sys: convert printks to pr_<level>
Applying: thermal: add support for thermal sensor present on SPEAr13xx machines
Applying: thermal-add-support-for-thermal-sensor-present-on-spear13xx-machines-fix
Applying: thermal-add-support-for-thermal-sensor-present-on-spear13xx-machines-fix-fix
Applying: unicore32: use block_sigmask()
Applying: blackfin: use set_current_blocked() and block_sigmask()
Applying: bluetooth: add support for BCM20702A0 [0a5c:21e6]
Applying: debugobjects: Fix selftest for static warnings
Applying: ocfs2: use find_last_bit()
Applying: ocfs2: use bitmap_weight()
Applying: parisc: use set_current_blocked() and block_sigmask()
Applying: xtensa: don't reimplement force_sigsegv()
Applying: xtensa: no need to reset handler if SA_ONESHOT
Applying: xtensa: don't mask signals if we fail to setup signal stack
Applying: xtensa: use set_current_blocked() and block_sigmask()
Applying: slab: introduce kmalloc_array()
Applying: sparc: use block_sigmask()
Applying: mm, oom: avoid looping when chosen thread detaches its mm
Applying: mm, oom: fold oom_kill_task() into oom_kill_process()
Applying: mm, oom: do not emit oom killer warning if chosen thread is already exiting
Applying: mm, oom: introduce independent oom killer ratelimit state
Applying: mm: add rss counters consistency check
Applying: mm/vmscan.c: cleanup with s/reclaim_mode/isolate_mode/
Applying: mm: make get_mm_counter static-inline
Applying: mm: vmscan: fix misused nr_reclaimed in shrink_mem_cgroup_zone()
Applying: mm: make swapin readahead skip over holes
Applying: make-swapin-readahead-skip-over-holes-fix
Applying: vmscan: reclaim at order 0 when compaction is enabled
Applying: vmscan: kswapd carefully call compaction
Applying: vmscan-kswapd-carefully-call-compaction-fix
Applying: vmscan: only defer compaction for failed order and higher
Applying: compact_pgdat: workaround lockdep warning in kswapd
Applying: mm: compaction: make compact_control order signed
Applying: mm-compaction-make-compact_control-order-signed-fix
Applying: hugetlbfs: fix hugetlb_get_unmapped_area()
Applying: hugetlb: drop prev_vma in hugetlb_get_unmapped_area_topdown()
Applying: hugetlb: try to search again if it is really needed
Applying: hugetlb-try-to-search-again-if-it-is-really-needed-fix
Applying: mm: do not reset cached_hole_size when vma is unmapped
Applying: mm: search from free_area_cache for the bigger size
Applying: pagemap: avoid splitting thp when reading /proc/pid/pagemap
Applying: thp: optimize away unnecessary page table locking
Applying: fix mremap bug of failing to split thp
Applying: thp-optimize-away-unnecessary-page-table-locking-fix-checkpatch-fixes
Applying: pagemap: export KPF_THP
Applying: pagemap: document KPF_THP and make page-types aware of it
Applying: pagemap: introduce data structure for pagemap entry
Applying: mm: replace PAGE_MIGRATION with IS_ENABLED(CONFIG_MIGRATION)
Applying: mm: vmscan: forcibly scan highmem if there are too many buffer_heads pinning highmem
Applying: mm: move buffer_heads_over_limit check up
Applying: mm-vmscan-forcibly-scan-highmem-if-there-are-too-many-buffer_heads-pinning-highmem-fix-fix
Applying: mm: hugetlb: defer freeing pages when gathering surplus pages
Applying: rmap: anon_vma_prepare: Reduce code duplication by calling anon_vma_chain_link
Applying: vmscan: handle isolated pages with lru lock released
Applying: thp: documentation: 'transparent_hugepage=' can also be specified on cmdline
Applying: mm: hugetlb: bail out unmapping after serving reference page
Applying: mm: hugetlb: cleanup duplicated code in unmapping vm range
Applying: procfs: mark thread stack correctly in proc/<pid>/maps
Applying: procfs-mark-thread-stack-correctly-in-proc-pid-maps-checkpatch-fixes
Applying: procfs-mark-thread-stack-correctly-in-proc-pid-maps-fix
Applying: mm, oom: force oom kill on sysrq+f
Applying: mm: fix page-faults detection in swap-token logic
Applying: mm: add extra free kbytes tunable
Applying: mm-add-extra-free-kbytes-tunable-update
Applying: mm-add-extra-free-kbytes-tunable-update-checkpatch-fixes
Applying: memcg: replace MEM_CONT by MEM_RES_CTLR
Applying: memcg: replace mem and mem_cont stragglers
Applying: memcg: lru_size instead of MEM_CGROUP_ZSTAT
Applying: memcg: enum lru_list lru
Applying: memcg: remove redundant returns
Applying: memcg: remove unnecessary thp check in page stat accounting
Applying: idr: make idr_get_next() good for rcu_read_lock()
Applying: cgroup: revert ss_id_lock to spinlock
Applying: memcg: let css_get_next() rely upon rcu_read_lock()
Applying: memcg: remove PCG_CACHE page_cgroup flag
Applying: memcg-remove-pcg_cache-page_cgroup-flag-checkpatch-fixes
Applying: memcg: kill dead prev_priority stubs
Applying: memcg: remove EXPORT_SYMBOL(mem_cgroup_update_page_stat)
Applying: memcg: simplify move_account() check
Applying: memcg-simplify-move_account-check-fix
Applying: memcg: remove PCG_MOVE_LOCK flag from page_cgroup
Applying: memcg: use new logic for page stat accounting
Applying: memcg-use-new-logic-for-page-stat-accounting-fix
Applying: memcg: remove PCG_FILE_MAPPED
Applying: memcg-remove-pcg_file_mapped-fix
Applying: memcg: fix performance of mem_cgroup_begin_update_page_stat()
Applying: memcg-fix-performance-of-mem_cgroup_begin_update_page_stat-fix
Applying: mm/memcontrol.c: s/stealed/stolen/
Applying: mm/memcontrol.c: remove redundant BUG_ON() in mem_cgroup_usage_unregister_event()
Applying: mm/memcontrol.c: remove unnecessary 'break' in mem_cgroup_read()
Applying: frv: use set_current_blocked() and block_sigmask()
Applying: sh: no need to reset handler if SA_ONESHOT
Applying: sh: use set_current_blocked() and block_sigmask()
Applying: h8300: use set_current_blocked() and block_sigmask()
Applying: alpha: use set_current_blocked() and block_sigmask()
Applying: m32r: use set_current_blocked() and block_sigmask()
Applying: m68k: use set_current_blocked() and block_sigmask()
Applying: mn10300: use set_current_blocked() and block_sigmask()
Applying: C6X: use set_current_blocked() and block_sigmask()
Applying: cris: use set_current_blocked() and block_sigmask()
Applying: cris: select GENERIC_ATOMIC64
Applying: um: don't restore current->blocked on error
Applying: um: use set_current_blocked() and block_sigmask()
Applying: magic.h: move some FS magic numbers into magic.h
Applying: nmi watchdog: do not use cpp symbol in Kconfig
Applying: ceph, cifs, nfs, fuse: boolean and / or confusion
Applying: net: use this_cpu_xxx replace percpu_xxx funcs
Applying: percpu: remove percpu_xxx() functions
Applying: percpu-remove-percpu_xxx-functions-fix
Applying: headers: include linux/types.h where appropriate
Applying: prctl: add PR_{SET,GET}_CHILD_SUBREAPER to allow simple process supervision
Applying: prctl-add-pr_setget_child_subreaper-to-allow-simple-process-supervision-fix
Applying: prctl-add-pr_setget_child_subreaper-to-allow-simple-process-supervision-fix-fix
Applying: kernel/exit.c: if init dies, log a signal which killed it, if any
Applying: kernel-exitc-if-init-dies-log-a-signal-which-killed-it-if-any-fix
Applying: powerpc/eeh: remove eeh_event_handler()->daemonize()
Applying: vfs: increment iversion when a file is truncated
Applying: brlocks/lglocks: cleanups
Applying: brlocks-lglocks-cleanups-checkpatch-fixes
Applying: vfs: correctly set the dir i_mutex lockdep class
Applying: seq_file: fix mishandling of consecutive pread() invocations.
Applying: fs: symlink restrictions on sticky directories
Applying: fs-symlink-restrictions-on-sticky-directories-fix-2
Applying: fs: hardlink creation restrictions
Applying: fs-hardlink-creation-restrictions-fix
Applying: fs: hardlink creation restriction cleanup
Applying: MAINTAINERS: fix REMOTEPROC F: typo
Applying: MAINTAINERS: Update MCA section
Applying: MAINTAINERS: update git urls for 2.6 deletions
Applying: backlight: convert backlight i2c drivers to module_i2c_driver
Applying: backlight: convert backlight spi drivers to module_spi_driver
Applying: drivers/video/backlight/wm831x_bl.c: use devm_ functions
Applying: drivers/video/backlight: use devm_ functions
Applying: drivers/video/backlight/adp5520_bl.c: use devm_ functions
Applying: backlight: new backlight driver for LP855x devices
Applying: backlight: lp855x_bl: Add missing mutex_unlock in lp855x_read_byte error path
Applying: backlight/lp855x_bl.c: check platform data in lp855x_probe()
Applying: backlight/lp855x_bl.c: small cleanups
Applying: lp855x-bl: remove unnecessary platform data
Applying: lp855x-bl: remove unnecessary headers
Applying: backlight: add driver for Bachmann's ot200
Applying: backlight-add-driver-for-bachmanns-ot200-fix
Applying: backlight: add support for Pandora backlight
Applying: backlight-add-support-for-pandora-backlight-v2
Applying: backlight: convert platform_lcd to dev_pm_ops
Applying: bitops: rename for_each_set_bit_cont() in favor of analogous list.h function
Applying: bitops: remove for_each_set_bit_cont()
Applying: bitops: introduce for_each_clear_bit()
Applying: mtd: use for_each_clear_bit()
Applying: s390/char: use for_each_clear_bit()
Applying: uwb: use for_each_clear_bit()
Applying: x86: use for_each_clear_bit_from()
Applying: drivers/leds/leds-lp5521.c: fix typo
Applying: drivers/leds/leds-tca6507.c: cleanup error handling in tca6507_probe()
Applying: drivers/leds/leds-tca6507.c: remove obsolete cleanup for clientdata
Applying: drivers/leds/leds-lp5521.c: add 'name' in the lp5521_led_config
Applying: drivers/leds/leds-lp5521.c: add 'update_config' in the lp5521_platform_data
Applying: drivers/leds/leds-lp5521.c: support led pattern data
Applying: leds-lp5521-support-led-pattern-data-checkpatch-fixes
Applying: drivers/leds/leds-lp5521.c: redefinition of register bits
Applying: drivers/leds/leds-lp5523.c: constify some data
Applying: drivers/leds: add driver for PCA9633 I2C chip
Applying: drivers-leds-add-driver-for-pca9663-i2c-chip-fix
Applying: drivers-leds-add-driver-for-pca9663-i2c-chip-fix-2
Applying: drivers/leds/leds-pca9633.c: fix kcalloc parameters swapped
Applying: drivers/leds/leds-gpio.c: use linux/gpio.h rather than asm/gpio.h
Applying: leds-lm3530: set the max_brightness to 127
Applying: leds-lm3530: replace i2c_client with led_classdev
Applying: leds-lm3530-replace-i2c_client-with-led_classdev-fix
Applying: leds-lm3530: support pwm input mode
Applying: leds-lm3530: remove LM3530_ALS_ZONE_REG code
Applying: leds-lm3530: replace pltfm with pdata
Applying: drivers/leds/leds-pca9633.c: remove unused 'adapter' variable
Applying: drivers/leds/leds-lm3530.c: move the code setting gen_config to one place
Applying: drivers-leds-leds-lm3530c-move-the-code-setting-gen_config-to-one-place-fix
Applying: string: memchr_inv speed improvements
Applying: prio_tree: remove unnecessary code in prio_tree_replace
Applying: prio_tree: cleanup prio_tree_left()/prio_tree_right()
Applying: prio_tree: simplify prio_tree_expand()
Applying: prio_tree: introduce prio_set_parent()
Applying: include/ and checkpatch: prefer __scanf to __attribute__((format(scanf,...)
Applying: checkpatch: add some --strict coding style checks
Applying: crc32: remove two instances of trailing whitespaces
Applying: crc32: move long comment about crc32 fundamentals to Documentation/
Applying: crc32-move-long-comment-about-crc32-fundamentals-to-documentation-fix
Applying: crc32: simplify unit test code
Applying: crc32: miscellaneous cleanups
Applying: crc32: fix mixing of endian-specific types
Applying: crc32: make CRC_*_BITS definition correspond to actual bit counts
Applying: crc32: add slice-by-8 algorithm to existing code
Applying: crc32: optimize loop counter for x86
Applying: crc32: add note about this patchset to crc32.c
Applying: crc32: bolt on crc32c
Applying: crc32: Don't reference unnecessary crc32 tables in single-bit mode
Applying: crypto: crc32c should use library implementation
Applying: crc32: add self-test code for crc32c
Applying: crc32: select an algorithm via Kconfig
Applying: epoll: comment the funky #ifdef
Applying: epoll: remove unneeded variable in reverse_path_check()
Applying: init/do_mounts.c: create /root if it does not exist
Applying: rtc-spear: fix for balancing the enable_irq_wake in Power Mgmt
Applying: rtc/spear: fix for RTC_AIE_ON and RTC_AIE_OFF ioctl errors
Applying: rtc/rtc-spear: call platform_set_drvdata() before registering rtc device
Applying: rtc: convert rtc spi drivers to module_spi_driver
Applying: rtc: convert rtc i2c drivers to module_i2c_driver
Applying: MIPS: add RTC support for loongson1B
Applying: drivers/rtc/rtc-twl.c: optimize IRQ bit access
Applying: drivers/rtc/rtc-twl.c: enable RTC irrespective of its prior state
Applying: drivers/rtc/rtc-twl.c: simplify RTC interrupt clearing
Applying: drivers/rtc/rtc-twl.c: return correct RTC event from ISR
Applying: drivers/rtc: remove IRQF_DISABLED
Applying: drivers/rtc/rtc-pm8xxx.c: make pm8xxx_rtc_pm_ops static
Applying: drivers/rtc/rtc-max8925.c: fix max8925_rtc_read_alarm() return value error
Applying: drivers/rtc/rtc-max8925.c: fix alarm->enabled mistake in max8925_rtc_read_alarm/max8925_rtc_set_alarm
Applying: rtc: driver for DA9052/53 PMIC v1
Applying: rtc-rtc-driver-for-da9052-53-pmic-v1-fix
Applying: rtc: ds1307: refactor chip_desc table
Applying: rtc: ds1307: simplify irq setup code
Applying: rtc: ds1307: comment and format cleanup
Applying: rtc: ds1307: generalise ram size and offset
Applying: ptrace: the killed tracee should not enter the syscall
Applying: ptrace: don't send SIGTRAP on exec if SEIZED
Applying: ptrace: don't modify flags on PTRACE_SETOPTIONS failure
Applying: ptrace: simplify PTRACE_foo constants and PTRACE_SETOPTIONS code
Applying: ptrace: make PTRACE_SEIZE set ptrace options specified in 'data' parameter
Applying: ptrace: renumber PTRACE_EVENT_STOP so that future new options and events can match
Applying: ptrace: remove PTRACE_SEIZE_DEVEL bit
Applying: signal: give SEND_SIG_FORCED more power to beat SIGNAL_UNKILLABLE
Applying: signal: cosmetic, s/from_ancestor_ns/force/ in prepare_signal() paths
Applying: signal: oom_kill_task: use SEND_SIG_FORCED instead of force_sig()
Applying: signal: zap_pid_ns_processes: s/SEND_SIG_NOINFO/SEND_SIG_FORCED/
Applying: usermodehelper: use UMH_WAIT_PROC consistently
Applying: usermodehelper: introduce umh_complete(sub_info)
Applying: usermodehelper: implement UMH_KILLABLE
Applying: usermodehelper: kill umh_wait, renumber UMH_* constants
Applying: usermodehelper: ____call_usermodehelper() doesn't need do_exit()
Applying: kmod: introduce call_modprobe() helper
Applying: kmod: make __request_module() killable
Applying: kmod: avoid deadlock from recursive kmod call
Applying: kmod-avoid-deadlock-by-recursive-kmod-call-fix
Applying: fs/proc/kcore.c: make get_sparsemem_vmemmap_info() static
Applying: proc: speedup /proc/stat handling
Applying: procfs: add num_to_str() to speed up /proc/stat
Applying: procfs-add-num_to_str-to-speed-up-proc-stat-fix
Applying: procfs: avoid breaking the ABI in /proc/stat
Applying: procfs: speed up /proc/pid/stat, statm
Applying: procfs-speed-up-proc-pid-stat-statm-checkpatch-fixes
Applying: proc: clean up /proc/<pid>/environ handling
Applying: seq_file: add seq_set_overflow(), seq_overflow()
Applying: seq_file-add-seq_set_overflow-seq_overflow-fix
Applying: smp: introduce a generic on_each_cpu_mask() function
Applying: arm: move arm over to generic on_each_cpu_mask
Applying: tile: move tile to use generic on_each_cpu_mask
Applying: smp: add func to IPI cpus based on parameter func
Applying: smp-add-func-to-ipi-cpus-based-on-parameter-func-fix
Applying: smp-add-func-to-ipi-cpus-based-on-parameter-func-update
Applying: smp-add-func-to-ipi-cpus-based-on-parameter-func-update-fix
Applying: smp: add func to IPI cpus based on parameter func
Applying: smp-add-func-to-ipi-cpus-based-on-parameter-func-v9-fix
Applying: slub: only IPI CPUs that have per cpu obj to flush
Applying: fs: only send IPI to invalidate LRU BH when needed
Applying: mm: only IPI CPUs to drain local pages if they exist
Applying: mm-only-ipi-cpus-to-drain-local-pages-if-they-exist-update
Applying: mm-only-ipi-cpus-to-drain-local-pages-if-they-exist-v9
Applying: lib/cpumask.c: remove __any_online_cpu()
Applying: arch/ia64: remove references to cpu_*_map
Applying: ipc/sem.c: alternatives to preempt_disable()
Applying: ipc: provide generic compat versions of IPC syscalls
Applying: ipmi: decrease the IPMI message transaction time in interrupt mode
Applying: ipmi: increase KCS timeouts
Applying: ipmi: use a tasklet for handling received messages
Applying: ipmi: fix message handling during panics
Applying: ipmi: simplify locking
Applying: ipmi: use locks on watchdog timeout set on reboot
Applying: sysctl: use bitmap library functions
Applying: pidns: add reboot_pid_ns() to handle the reboot syscall
Applying: pidns-add-reboot_pid_ns-to-handle-the-reboot-syscall-fix
Applying: pidns-add-reboot_pid_ns-to-handle-the-reboot-syscall-checkpatch-fixes
Applying: fs/proc/namespaces.c: prevent crash when ns_entries[] is empty
Applying: selftests: launch individual selftests from the main Makefile
Applying: selftests/Makefile: make `run_tests' depend on `all'
Applying: mm: move page-types.c from Documentation to tools/vm
Applying: mm: move slabinfo.c to tools/vm
Applying: mm: move hugepage test examples to tools/testing/selftests/vm
Applying: move-hugepage-test-examples-to-tools-testing-selftests-vm-fix
Applying: move-hugepage-test-examples-to-tools-testing-selftests-vm-fix-fix
Applying: sysctl: make kernel.ns_last_pid control dependent on CHECKPOINT_RESTORE
Applying: fs, proc: introduce /proc/<pid>/task/<tid>/children entry
Applying: syscalls, x86: add __NR_kcmp syscall
Applying: syscalls-x86-add-__nr_kcmp-syscall-v8-fix
Applying: syscalls-x86-add-__nr_kcmp-syscall-v8-fix-2
Applying: c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat
Applying: c/r: prctl: extend PR_SET_MM to set up more mm_struct entries
Applying: ramoops: use pstore interface
Applying: ramoops: fix printk format warnings
Applying: notify_change(): check that i_mutex is held
Merging akpm (083c2d1 notify_change(): check that i_mutex is held)
Applying: percpu: fix for removal of percpu_xxx function
Applying: regmap: cope with bitops API change (for_each_set_bit_cont)
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* Re: [PATCH v2] parisc: dont unconditionally override CROSS_COMPILE for 64 bit.
From: Mike Frysinger @ 2012-02-28 6:06 UTC (permalink / raw)
To: James Bottomley
Cc: Paul Gortmaker, kyle@mcmartin.ca, deller@gmx.de,
dave.anglin@bell.net, linux-parisc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-next@vger.kernel.org
In-Reply-To: <1330399020.2822.106.camel@dabdike.int.hansenpartnership.com>
[-- Attachment #1: Type: Text/Plain, Size: 1211 bytes --]
On Monday 27 February 2012 22:17:01 James Bottomley wrote:
> On Mon, 2012-02-27 at 20:04 -0500, Mike Frysinger wrote:
> > On Monday 27 February 2012 17:03:10 James Bottomley wrote:
> > > --- a/arch/parisc/Makefile
> > > +++ b/arch/parisc/Makefile
> > >
> > > -CROSS_COMPILE := hppa64-linux-gnu-
> > > +
> > > +# if no default set, try to find the corresponding 64 bit compiler
> > > +ifeq ($(CROSS_COMPILE),)
> > > +CROSS_COMPILE := $(shell $(CC) -dumpmachine | sed
> > > s/hppa-\\\(.*\\\)/hppa64-\\1-/) +endif
> >
> > fails when using "hppa2.0-xxx". perhaps:
> > CROSS_COMPILE ?= $(shell $(CC) -dumpmachine | sed
> > 's/^hppa[^-]*-/hppa64-/')
> >
> > don't even need the ifeq check then
>
> How is that different from Carlos' suggestion?
sorry, but i'm not seeing any e-mails from Carlos in this thread. what is his
suggestion ?
> The reason it doesn't work is the same ... CROSS_COMPILE is defined to be
> empty.
my suggestion was purely an incremental improvement on the patch you posted.
it improves two things:
- detection when the default tuple is hppa2.0-xxx rather than hppa-xxx
- one line for set-variable-only-when-its-unset rather than three lines
-mike
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* linux-next: build failure after merge of the akpm tree
From: Stephen Rothwell @ 2012-02-28 5:58 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-next, linux-kernel, Mark Brown, Akinobu Mita
[-- Attachment #1: Type: text/plain, Size: 2046 bytes --]
Hi Andrew,
After merging the akpm tree, today's linux-next build (x86_64
allmodconfig) failed like this:
drivers/base/regmap/regcache-lzo.c: In function 'regcache_lzo_sync':
drivers/base/regmap/regcache-lzo.c:344:2: error: implicit declaration of function 'for_each_set_bit_cont' [-Werror=implicit-function-declaration]
drivers/base/regmap/regcache-lzo.c:345:41: error: expected ';' before '{' token
drivers/base/regmap/regcache-lzo.c:340:6: warning: unused variable 'ret' [-Wunused-variable]
drivers/base/regmap/regcache-lzo.c:338:15: warning: unused variable 'val' [-Wunused-variable]
drivers/base/regmap/regcache-lzo.c:368:1: warning: no return statement in function returning non-void [-Wreturn-type]
Caused by commits ac8d91c80190 ("regmap: Supply ranges to the sync
operations" and a0941e562e80 ("regmap: Fix x86_64 breakage") from the
regmap tree interacting with commits "bitops: rename for_each_set_bit_cont()
in favor of analogous list.h function" and "bitops: remove
for_each_set_bit_cont()" from the akpm tree.
I have applied this fix up patch:
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 28 Feb 2012 16:15:35 +1100
Subject: [PATCH] regmap: cope with bitops API change (for_each_set_bit_cont)
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
---
drivers/base/regmap/regcache-lzo.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/base/regmap/regcache-lzo.c b/drivers/base/regmap/regcache-lzo.c
index 8d00615..77dc532 100644
--- a/drivers/base/regmap/regcache-lzo.c
+++ b/drivers/base/regmap/regcache-lzo.c
@@ -341,7 +341,7 @@ static int regcache_lzo_sync(struct regmap *map, unsigned int min,
lzo_blocks = map->cache;
i = min;
- for_each_set_bit_cont(i, lzo_blocks[0]->sync_bmp,
+ for_each_set_bit_from(i, lzo_blocks[0]->sync_bmp,
lzo_blocks[0]->sync_bmp_nbits) {
if (i > max)
continue;
--
1.7.9.1
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply related
* Re: linux-next: manual merge of the uprobes tree with Linus' tree
From: Srikar Dronamraju @ 2012-02-28 5:34 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: linux-next, linux-kernel, Jim Keniston, Oleg Nesterov
In-Reply-To: <20120228134319.033a60df8db2925d91604c18@canb.auug.org.au>
Hi Stephen,
> Today's linux-next merge of the uprobes tree got a conflict in
> kernel/fork.c between commit d80e731ecab4 ("epoll: introduce POLLFREE to
> flush ->signalfd_wqh before kfree()") from Linus' tree and commit
> 1f9eb65410a6 ("uprobes/core: handle breakpoint and signal step
> exception") from the uprobes tree.
>
> Just context changes. I fixed it up (see below) and can carry the fix as
> necessary.
Okay, Thanks for letting me know.
I will fix this up accordingly.
^ permalink raw reply
* linux-next: manual merge of the akpm tree with the tip tree
From: Stephen Rothwell @ 2012-02-28 4:52 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-next, linux-kernel, Jan Beulich, Thomas Gleixner,
Ingo Molnar, H. Peter Anvin, Peter Zijlstra, Alex Shi
[-- Attachment #1: Type: text/plain, Size: 822 bytes --]
Hi Andrew,
Today's linux-next merge of the akpm tree got a conflict in
arch/x86/kernel/nmi_selftest.c between commit f0ba662a6e06 ("x86:
Properly _init-annotate NMI selftest code") from the tip tree and commit
"x86: use this_cpu_xxx to replace percpu_xxx funcs" from the akpm tree.
Just context changes. I fixed it up (see below) and can carry the fix as
necessary.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --cc arch/x86/kernel/nmi_selftest.c
index 2c39dcd,8aca005..0000000
--- a/arch/x86/kernel/nmi_selftest.c
+++ b/arch/x86/kernel/nmi_selftest.c
@@@ -12,7 -12,7 +12,8 @@@
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/delay.h>
+#include <linux/init.h>
+ #include <linux/percpu.h>
#include <asm/apic.h>
#include <asm/nmi.h>
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* Re: linux-next: manual merge of the driver-core tree with the pci tree
From: Yinghai Lu @ 2012-02-28 4:39 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Greg KH, linux-next, linux-kernel, Jesse Barnes
In-Reply-To: <20120228142909.48fa1eea6980eaffa27abfdc@canb.auug.org.au>
On Mon, Feb 27, 2012 at 7:29 PM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> include/linux/pci.h between commit 6754b9e9c335 ("PCI: Rename
> pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge") from the
> pci tree and commit aad4f4000cec ("PCI: Add helper macro for
> pci_register_driver boilerplate") from the driver-core tree.
>
> Just context changes. I fixed it up (see below) and can carry the fix as
> necessary.
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au
>
> diff --cc include/linux/pci.h
> index 5584aac,d4afd70..0000000
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@@ -947,7 -946,20 +947,20 @@@ int __must_check __pci_register_driver(
> __pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
>
> void pci_unregister_driver(struct pci_driver *dev);
> +
> + /**
> + * module_pci_driver() - Helper macro for registering a PCI driver
> + * @__pci_driver: pci_driver struct
> + *
> + * Helper macro for PCI drivers which do not do anything special in module
> + * init/exit. This eliminates a lot of boilerplate. Each module may only
> + * use this macro once, and calling it replaces module_init() and module_exit()
> + */
> + #define module_pci_driver(__pci_driver) \
> + module_driver(__pci_driver, pci_register_driver, \
> + pci_unregister_driver)
> +
> -void pci_remove_behind_bridge(struct pci_dev *dev);
> +void pci_stop_and_remove_behind_bridge(struct pci_dev *dev);
> struct pci_driver *pci_dev_driver(const struct pci_dev *dev);
> int pci_add_dynid(struct pci_driver *drv,
> unsigned int vendor, unsigned int device,
yes. we rename pci_remove_* to pci_stop_and_remove_*.
BTW, include/linux/pci.h looks like a mess. We should tidy it up
Thanks
Yinghai
^ permalink raw reply
* Re: linux-next: manual merge of the devicetree tree with the powerpc tree
From: Grant Likely @ 2012-02-28 4:38 UTC (permalink / raw)
To: Stephen Rothwell
Cc: linux-next, linux-kernel, Benjamin Herrenschmidt, Paul Mackerras,
linuxppc-dev
In-Reply-To: <20120228130634.3c511b096bc78f9b99e804fe@canb.auug.org.au>
On Mon, Feb 27, 2012 at 7:06 PM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi Grant,
>
> Today's linux-next merge of the devicetree tree got a conflict in
> arch/powerpc/platforms/iseries/Kconfig between commit 3d066d77cf46
> ("powerpc: remove CONFIG_PPC_ISERIES from the architecture Kconfig
> files") from the powerpc tree and commit 0f22dd395fc4 ("of: Only compile
> OF_DYNAMIC on PowerPC pseries and iseries") from the devicetree tree.
>
> The former commit removes the file (as the legacy iSeries platform is
> being removed), so I did that.
Okay, thanks.
g.
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
^ permalink raw reply
* linux-next: manual merge of the irqdomain tree with the powerpc tree
From: Stephen Rothwell @ 2012-02-28 4:23 UTC (permalink / raw)
To: Grant Likely; +Cc: linux-next, Paul Mackerras, linux-kernel, linuxppc-dev
[-- Attachment #1.1: Type: text/plain, Size: 1200 bytes --]
Hi Grant,
Today's linux-next merge of the irqdomain tree got a conflict in
arch/powerpc/sysdev/mpic.c between commit fe83364f0bf1 ("powerpc/mpic:
Fix allocation of reverse-map for multi-ISU mpics") from the powerpc tree
and commit a8db8cf0d894 ("irq_domain: Replace irq_alloc_host() with
revmap-specific initializers") from the irqdomain tree.
I fixed it up (see below) and can carry the fix as necessary.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --cc arch/powerpc/sysdev/mpic.c
index 16eb743,c83a512..0000000
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@@ -1355,9 -1345,9 +1355,9 @@@ struct mpic * __init mpic_alloc(struct
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
- mpic->irqhost = irq_alloc_host(mpic->node, IRQ_HOST_MAP_LINEAR,
+ mpic->irqhost = irq_domain_add_linear(mpic->node,
- isu_size ? isu_size : mpic->num_sources,
- &mpic_host_ops, mpic);
+ last_irq + 1, &mpic_host_ops,
- intvec_top + 1);
++ mpic);
/*
* FIXME: The code leaks the MPIC object and mappings here; this
[-- Attachment #1.2: Type: application/pgp-signature, Size: 836 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
^ permalink raw reply
* linux-next: manual merge of the driver-core tree with the pci tree
From: Stephen Rothwell @ 2012-02-28 3:29 UTC (permalink / raw)
To: Greg KH; +Cc: linux-next, linux-kernel, Yinghai Lu, Jesse Barnes
[-- Attachment #1: Type: text/plain, Size: 1602 bytes --]
Hi Greg,
Today's linux-next merge of the driver-core tree got a conflict in
include/linux/pci.h between commit 6754b9e9c335 ("PCI: Rename
pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge") from the
pci tree and commit aad4f4000cec ("PCI: Add helper macro for
pci_register_driver boilerplate") from the driver-core tree.
Just context changes. I fixed it up (see below) and can carry the fix as
necessary.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --cc include/linux/pci.h
index 5584aac,d4afd70..0000000
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@@ -947,7 -946,20 +947,20 @@@ int __must_check __pci_register_driver(
__pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
void pci_unregister_driver(struct pci_driver *dev);
+
+ /**
+ * module_pci_driver() - Helper macro for registering a PCI driver
+ * @__pci_driver: pci_driver struct
+ *
+ * Helper macro for PCI drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+ #define module_pci_driver(__pci_driver) \
+ module_driver(__pci_driver, pci_register_driver, \
+ pci_unregister_driver)
+
-void pci_remove_behind_bridge(struct pci_dev *dev);
+void pci_stop_and_remove_behind_bridge(struct pci_dev *dev);
struct pci_driver *pci_dev_driver(const struct pci_dev *dev);
int pci_add_dynid(struct pci_driver *drv,
unsigned int vendor, unsigned int device,
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* Re: [PATCH v2] parisc: dont unconditionally override CROSS_COMPILE for 64 bit.
From: James Bottomley @ 2012-02-28 3:17 UTC (permalink / raw)
To: Mike Frysinger
Cc: Paul Gortmaker, kyle@mcmartin.ca, deller@gmx.de,
dave.anglin@bell.net, linux-parisc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-next@vger.kernel.org
In-Reply-To: <201202272004.55187.vapier@gentoo.org>
On Mon, 2012-02-27 at 20:04 -0500, Mike Frysinger wrote:
> On Monday 27 February 2012 17:03:10 James Bottomley wrote:
> > --- a/arch/parisc/Makefile
> > +++ b/arch/parisc/Makefile
> >
> > -CROSS_COMPILE := hppa64-linux-gnu-
> > +
> > +# if no default set, try to find the corresponding 64 bit compiler
> > +ifeq ($(CROSS_COMPILE),)
> > +CROSS_COMPILE := $(shell $(CC) -dumpmachine | sed s/hppa-\\\(.*\\\)/hppa64-\\1-/)
> > +endif
>
> fails when using "hppa2.0-xxx". perhaps:
> CROSS_COMPILE ?= $(shell $(CC) -dumpmachine | sed 's/^hppa[^-]*-/hppa64-/')
>
> don't even need the ifeq check then
How is that different from Carlos' suggestion? The reason it doesn't
work is the same ... CROSS_COMPILE is defined to be empty.
James
^ permalink raw reply
* linux-next: manual merge of the uprobes tree with Linus' tree
From: Stephen Rothwell @ 2012-02-28 2:43 UTC (permalink / raw)
To: Srikar Dronamraju; +Cc: linux-next, linux-kernel, Jim Keniston, Oleg Nesterov
[-- Attachment #1: Type: text/plain, Size: 831 bytes --]
Hi Srikar,
Today's linux-next merge of the uprobes tree got a conflict in
kernel/fork.c between commit d80e731ecab4 ("epoll: introduce POLLFREE to
flush ->signalfd_wqh before kfree()") from Linus' tree and commit
1f9eb65410a6 ("uprobes/core: handle breakpoint and signal step
exception") from the uprobes tree.
Just context changes. I fixed it up (see below) and can carry the fix as
necessary.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --cc kernel/fork.c
index 14dac32,df711bb..0000000
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@@ -66,7 -66,7 +66,8 @@@
#include <linux/user-return-notifier.h>
#include <linux/oom.h>
#include <linux/khugepaged.h>
+#include <linux/signalfd.h>
+ #include <linux/uprobes.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* linux-next: manual merge of the devicetree tree with the powerpc tree
From: Stephen Rothwell @ 2012-02-28 2:06 UTC (permalink / raw)
To: Grant Likely
Cc: linux-next, linux-kernel, Benjamin Herrenschmidt, Paul Mackerras,
linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 538 bytes --]
Hi Grant,
Today's linux-next merge of the devicetree tree got a conflict in
arch/powerpc/platforms/iseries/Kconfig between commit 3d066d77cf46
("powerpc: remove CONFIG_PPC_ISERIES from the architecture Kconfig
files") from the powerpc tree and commit 0f22dd395fc4 ("of: Only compile
OF_DYNAMIC on PowerPC pseries and iseries") from the devicetree tree.
The former commit removes the file (as the legacy iSeries platform is
being removed), so I did that.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* Re: [PATCH v2] parisc: dont unconditionally override CROSS_COMPILE for 64 bit.
From: Mike Frysinger @ 2012-02-28 1:04 UTC (permalink / raw)
To: James Bottomley
Cc: Paul Gortmaker, kyle@mcmartin.ca, deller@gmx.de,
dave.anglin@bell.net, linux-parisc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-next@vger.kernel.org
In-Reply-To: <1330380189.2822.95.camel@dabdike.int.hansenpartnership.com>
[-- Attachment #1: Type: Text/Plain, Size: 532 bytes --]
On Monday 27 February 2012 17:03:10 James Bottomley wrote:
> --- a/arch/parisc/Makefile
> +++ b/arch/parisc/Makefile
>
> -CROSS_COMPILE := hppa64-linux-gnu-
> +
> +# if no default set, try to find the corresponding 64 bit compiler
> +ifeq ($(CROSS_COMPILE),)
> +CROSS_COMPILE := $(shell $(CC) -dumpmachine | sed s/hppa-\\\(.*\\\)/hppa64-\\1-/)
> +endif
fails when using "hppa2.0-xxx". perhaps:
CROSS_COMPILE ?= $(shell $(CC) -dumpmachine | sed 's/^hppa[^-]*-/hppa64-/')
don't even need the ifeq check then
-mike
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* Re: [PATCH] sound: fix trivial build error in mpc5200_dma.c
From: Paul Gortmaker @ 2012-02-28 0:43 UTC (permalink / raw)
To: Mark Brown; +Cc: Timur Tabi, perex, tiwai, lrg, linux-next
In-Reply-To: <20120227235630.GC23230@opensource.wolfsonmicro.com>
On Mon, Feb 27, 2012 at 6:56 PM, Mark Brown
<broonie@opensource.wolfsonmicro.com> wrote:
> On Mon, Feb 27, 2012 at 03:56:38PM -0600, Timur Tabi wrote:
>> Mark Brown wrote:
>
>> > Please also try to use changelog headers consistent with the subsystem.
>
>> Can you explain what that means? What are "changelog headers"?
>
> The first line of the changelog which gets treated specially in various
> ways.
Automated scripts? Something else? I'd be interested to know.
I have to admit being confused by this as well. I paged through the
git whatchanged info, and guessed that I should have used a prefix
like "ASoC: mpc5200_dma" (camelcase sic) but I think that to expect
that level of awareness from general contributors is probably expecting
a bit much. I like to think I'm not totally clueless, but I would have
never thought of the above in advance...
In any case, if I have further fixups I happen across, I will try to feed
your bots the correct prefix.
Paul.
^ permalink raw reply
* Re: linux-next: Tree for Feb 27 (gpio-sodaville.c)
From: Grant Likely @ 2012-02-28 0:06 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Randy Dunlap, linux-next, LKML, Hans J. Koch, Linus Walleij
In-Reply-To: <20120228104047.85b5515f3b27c631580f5503@canb.auug.org.au>
On Mon, Feb 27, 2012 at 4:40 PM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> On Mon, 27 Feb 2012 09:56:21 -0800 Randy Dunlap <rdunlap@xenotime.net> wrote:
>>
>> on i386:
>>
>> drivers/gpio/gpio-sodaville.c:130:2: error: unknown field 'dt_translate' specified in initializer
>> drivers/gpio/gpio-sodaville.c:130:2: warning: initialization from incompatible pointer type
>> drivers/gpio/gpio-sodaville.c: In function 'sdv_register_irqsupport':
>> drivers/gpio/gpio-sodaville.c:152:8: error: 'struct irq_domain' has no member named 'irq_base'
>> drivers/gpio/gpio-sodaville.c:182:2: error: implicit declaration of function 'irq_domain_add'
>> drivers/gpio/gpio-sodaville.c: In function 'sdv_gpio_remove':
>> drivers/gpio/gpio-sodaville.c:263:2: error: implicit declaration of function 'irq_domain_del'
>
> These are a conflicts between the gio tree and the irqdomain tree.
> Grant, can you supply me with a merge fix patch? Or will you merge the
> irqdomain stuff into the gpio tree (making sure that the irqdomain tree
> never rebases again) ...
The irqdomain branch has already been made stable for that exact
reason with other trees. I'll get it fixed up and send out an update.
I've got 4 hours on a plane tomorrow, so I'll probably crank it out
then.
g.
^ permalink raw reply
* Re: [PATCH] sound: fix trivial build error in mpc5200_dma.c
From: Mark Brown @ 2012-02-27 23:56 UTC (permalink / raw)
To: Timur Tabi; +Cc: Paul Gortmaker, perex, tiwai, lrg, linux-next
In-Reply-To: <4F4BFC16.2090602@freescale.com>
[-- Attachment #1: Type: text/plain, Size: 303 bytes --]
On Mon, Feb 27, 2012 at 03:56:38PM -0600, Timur Tabi wrote:
> Mark Brown wrote:
> > Please also try to use changelog headers consistent with the subsystem.
> Can you explain what that means? What are "changelog headers"?
The first line of the changelog which gets treated specially in various
ways.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* Re: linux-next: Tree for Feb 27 (gpio-sodaville.c)
From: Stephen Rothwell @ 2012-02-27 23:40 UTC (permalink / raw)
To: Randy Dunlap; +Cc: linux-next, LKML, Hans J. Koch, Grant Likely, Linus Walleij
In-Reply-To: <4F4BC3C5.8040802@xenotime.net>
[-- Attachment #1: Type: text/plain, Size: 1040 bytes --]
On Mon, 27 Feb 2012 09:56:21 -0800 Randy Dunlap <rdunlap@xenotime.net> wrote:
>
> on i386:
>
> drivers/gpio/gpio-sodaville.c:130:2: error: unknown field 'dt_translate' specified in initializer
> drivers/gpio/gpio-sodaville.c:130:2: warning: initialization from incompatible pointer type
> drivers/gpio/gpio-sodaville.c: In function 'sdv_register_irqsupport':
> drivers/gpio/gpio-sodaville.c:152:8: error: 'struct irq_domain' has no member named 'irq_base'
> drivers/gpio/gpio-sodaville.c:182:2: error: implicit declaration of function 'irq_domain_add'
> drivers/gpio/gpio-sodaville.c: In function 'sdv_gpio_remove':
> drivers/gpio/gpio-sodaville.c:263:2: error: implicit declaration of function 'irq_domain_del'
These are a conflicts between the gio tree and the irqdomain tree.
Grant, can you supply me with a merge fix patch? Or will you merge the
irqdomain stuff into the gpio tree (making sure that the irqdomain tree
never rebases again) ...
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* Re: linux-next: build failure after merge of the final tree
From: Benjamin Herrenschmidt @ 2012-02-27 23:30 UTC (permalink / raw)
To: Stephen Rothwell
Cc: Jesse Barnes, linux-next, linux-kernel, Bjorn Helgaas, ppc-dev
In-Reply-To: <1330334360.11728.3.camel@pasglop>
On Mon, 2012-02-27 at 20:19 +1100, Benjamin Herrenschmidt wrote:
> On Mon, 2012-02-27 at 17:37 +1100, Stephen Rothwell wrote:
> > pci_add_resource_offset(resources, res,
> > - (resource_size_t) hose->io_base_virt - _IO_BASE);
> > + (resource_size_t)(unsigned long)hose->io_base_virt - _IO_BASE);
>
> We have to be careful here as we do want sign extension to happen (yeah
> it's odd, but it's the way we do IOs on ppc32 :-) Maybe I should change
> it one day).
>
> So we probably want to do:
>
> (resource_size_t)(long long)(hose->io_base_virt - _IO_BASE)
Oops ... that was meant to read (long) not (long long)... Any ways, I
more or less convinced myself that even without the sign extension it
would still work, since the IO port number is eventually cast to an
unsigned int by the accessors, so as long as the low 32-bits are correct
(and they'll be with or without the sign extension), we should be fine.
It's just that something trying to print the resource might end up
displaying garbage in the top bits.
Cheers,
Ben.
> Basically, IO resources are relative to _IO_BASE which on ppc32 is
> basically the virtual address where we map the first PHB IO space.
>
> Subsequent PHB mappings can end up below _IO_BASE, leading to negative
> resource values for IO BARs on those busses. It all works fine because
> even an unsigned addition will do the right thing as long as the value
> is fully sign extended.
>
> Cheers,
> Ben.
^ permalink raw reply
* Re: linux-next: manual merge of the pci tree with the mips tree
From: Bjorn Helgaas @ 2012-02-27 23:15 UTC (permalink / raw)
To: Stephen Rothwell; +Cc: Jesse Barnes, linux-next, linux-kernel, Ralf Baechle
In-Reply-To: <20120227113129.c03c34ff7ea516f155cf0c87@canb.auug.org.au>
On Sun, Feb 26, 2012 at 5:31 PM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi Jesse,
>
> Today's linux-next merge of the pci tree got a conflict in
> arch/mips/pci/pci.c between commit f79eaeb10849 ("MIPS: PCI: use
> list_for_each_entry() for bus->devices traversal") from the mips tree and
> commit 96a6b9ad05a2 ("mips/PCI: get rid of device resource fixups") from
> the pci tree.
>
> The latter appears to supersede the former, so I used that.
Sounds right to me. Thanks.
Bjorn
^ permalink raw reply
* Re: + drivers-mfd-twl-corec-wtf-isnt-this-fixed-yet.patch added to -mm tree
From: Randy Dunlap @ 2012-02-27 22:47 UTC (permalink / raw)
To: Grant Likely
Cc: akpm, mm-commits, b-cousson, balajitk, gg, rob.herring, sameo,
linux-next
In-Reply-To: <CACxGe6uA65Lgsk3nEzkhxDZPMLamaieykmwo6LcWp_o7DFeSBw@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1675 bytes --]
On 02/27/2012 02:09 PM, Grant Likely wrote:
> On Mon, Feb 27, 2012 at 10:46 AM, Randy Dunlap <rdunlap@xenotime.net> wrote:
>> On 02/24/2012 03:31 PM, Grant Likely wrote:
>>
>>> On Fri, Feb 24, 2012 at 02:27:28PM -0800, akpm@linux-foundation.org wrote:
>>>>
>>>> The patch titled
>>>> Subject: drivers/mfd/twl-core.c: wtf isn't this fixed yet??
>>>> has been added to the -mm tree. Its filename is
>>>> drivers-mfd-twl-corec-wtf-isnt-this-fixed-yet.patch
>>>>
>>>> Before you just go and hit "reply", please:
>>>> a) Consider who else should be cc'ed
>>>> b) Prefer to cc a suitable mailing list as well
>>>> c) Ideally: find the original patch on the mailing list and do a
>>>> reply-to-all to that, adding suitable additional cc's
>>>>
>>>> *** Remember to use Documentation/SubmitChecklist when testing your code ***
>>>>
>>>> The -mm tree is included into linux-next and is updated
>>>> there every 3-4 working days
>>>
>>> Hi Andrew,
>>>
>>> I've posted patchs to fix this today, and I'll push it out to my tree
>>> on the weekend so that Monday's linux-next will have this finally solved.
>>
>>
>> Did these patches get pushed??
>>
>> linux-next of 20120227 still has build errors in twl-core.c:
>>
>> drivers/mfd/twl-core.c:1237:2: error: implicit declaration of function 'irq_alloc_descs'
>> drivers/mfd/twl-core.c:1332:3: error: implicit declaration of function 'of_platform_populate'
>>
>> on both i386 and x86_64.
>
> I pushed it out, it is in linux-next, and next-20120227 built fine for
> me. Can you send me your .config?
One of the x86_64 failing configs is attached.
I had 5 such build failures in 20 builds.
thanks.
--
~Randy
[-- Attachment #2: config-r4901 --]
[-- Type: text/plain, Size: 63128 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.3.0-rc5 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_FHANDLE=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
CONFIG_CGROUP_MEM_RES_CTLR_KMEM=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_KVMTOOL_TEST_ENABLE=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
# CONFIG_KVM_CLOCK is not set
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=4096
CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
# CONFIG_ACPI_THERMAL is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_APEI=y
# CONFIG_ACPI_APEI_GHES is not set
# CONFIG_ACPI_APEI_MEMORY_FAILURE is not set
CONFIG_ACPI_APEI_EINJ=y
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not set
# CONFIG_HT_IRQ is not set
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_CARDBUS is not set
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
# CONFIG_RAPIDIO_TSI568 is not set
CONFIG_RAPIDIO_CPS_GEN2=y
# CONFIG_RAPIDIO_TSI500 is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
CONFIG_TCP_CONG_VENO=y
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
# CONFIG_NF_CT_PROTO_SCTP is not set
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
CONFIG_NETFILTER_XT_MATCH_ESP=y
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_IPVS=y
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=y
# CONFIG_IP_SET is not set
CONFIG_IP_VS=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
# CONFIG_IP_VS_PROTO_UDP is not set
CONFIG_IP_VS_PROTO_AH_ESP=y
# CONFIG_IP_VS_PROTO_ESP is not set
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
# CONFIG_IP_VS_LBLC is not set
CONFIG_IP_VS_LBLCR=y
# CONFIG_IP_VS_DH is not set
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
# CONFIG_IP_VS_NQ is not set
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
# CONFIG_IP_VS_NFCT is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_CONNTRACK_IPV4 is not set
CONFIG_IP_NF_QUEUE=y
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
CONFIG_TIPC_DEBUG=y
# CONFIG_ATM is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_ECONET=y
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_DEBUG=y
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_CMTP=y
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
# CONFIG_BT_HCIUART_ATH3K is not set
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=y
# CONFIG_BT_MRVL is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEFAULT_PS is not set
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
# CONFIG_DMA_SHARED_BUFFER is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
# CONFIG_XEN_BLKDEV_FRONTEND is not set
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
CONFIG_BLK_DEV_RBD=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
CONFIG_INTEL_MID_PTI=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
CONFIG_ICS932S401=y
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=y
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1780 is not set
CONFIG_SENSORS_BH1770=y
# CONFIG_SENSORS_APDS990X is not set
CONFIG_HMC6352=y
CONFIG_DS1682=y
# CONFIG_VMWARE_BALLOON is not set
CONFIG_BMP085=y
# CONFIG_PCH_PHUB is not set
CONFIG_USB_SWITCH_FSA9480=y
CONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=y
# CONFIG_IWMC3200TOP_DEBUG is not set
# CONFIG_IWMC3200TOP_DEBUGFS is not set
#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=y
CONFIG_EQUALIZER=y
CONFIG_MII=y
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
# CONFIG_MACVLAN is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_RIONET=y
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_ETHERNET is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=y
# CONFIG_HIPPI is not set
CONFIG_NET_SB1000=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_PLIP=y
# CONFIG_PPP is not set
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
CONFIG_PCMCIA_WL3501=y
# CONFIG_PRISM54 is not set
# CONFIG_RTL8180 is not set
CONFIG_ADM8211=y
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
CONFIG_B43=y
# CONFIG_B43_BCMA is not set
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
# CONFIG_B43_PHY_HT is not set
CONFIG_B43_LEDS=y
CONFIG_B43_DEBUG=y
# CONFIG_B43LEGACY is not set
CONFIG_BRCMUTIL=y
CONFIG_BRCMSMAC=y
# CONFIG_BRCMFMAC is not set
# CONFIG_BRCMDBG is not set
# CONFIG_HOSTAP is not set
CONFIG_IPW2100=y
# CONFIG_IPW2100_MONITOR is not set
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=y
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
# CONFIG_IPW2200_QOS is not set
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=y
# CONFIG_LIBIPW_DEBUG is not set
CONFIG_IWLWIFI=y
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_P2P=y
CONFIG_IWLEGACY=y
#
# Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
# CONFIG_IWL4965 is not set
CONFIG_IWL3945=y
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
CONFIG_RTL8192DE=y
CONFIG_RTLWIFI=y
CONFIG_RTLWIFI_DEBUG=y
CONFIG_WL1251=y
# CONFIG_WL1251_SDIO is not set
# CONFIG_WL12XX_MENU is not set
# CONFIG_MWIFIEX is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_XEN_NETDEV_FRONTEND is not set
# CONFIG_VMXNET3 is not set
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not set
CONFIG_ISDN_AUDIO=y
# CONFIG_ISDN_TTY_FAX is not set
#
# ISDN feature submodules
#
# CONFIG_ISDN_DIVERSION is not set
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=y
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
# CONFIG_DE_AOC is not set
CONFIG_HISAX_NO_SENDCOMPLETE=y
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
# CONFIG_HISAX_1TR6 is not set
# CONFIG_HISAX_NI1 is not set
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
# CONFIG_HISAX_TELESPCI is not set
# CONFIG_HISAX_S0BOX is not set
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
# CONFIG_HISAX_ELSA is not set
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
# CONFIG_HISAX_NICCY is not set
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
# CONFIG_HISAX_ENTERNOW_PCI is not set
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=y
# CONFIG_HISAX_AVM_A1_CS is not set
# CONFIG_HISAX_TELES_CS is not set
#
# HiSax sub driver modules
#
CONFIG_HISAX_HFC4S8S=y
# CONFIG_HISAX_FRITZ_PCIPNP is not set
#
# Active cards
#
CONFIG_ISDN_CAPI=y
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=y
# CONFIG_ISDN_CAPI_CAPIDRV is not set
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
# CONFIG_ISDN_DRV_AVMB1_B1PCI is not set
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=y
CONFIG_ISDN_DRV_AVMB1_AVM_CS=y
# CONFIG_ISDN_DRV_AVMB1_T1PCI is not set
CONFIG_ISDN_DRV_AVMB1_C4=y
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=y
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=y
# CONFIG_ISDN_DIVAS_USERIDI is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_MISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_STMPE is not set
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=y
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_AS5011 is not set
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_INPUT_TABLET=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
# CONFIG_SERIAL_XILINX_PS_UART is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_XEN is not set
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
CONFIG_MWAVE=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_INTEL_MID is not set
CONFIG_I2C_OCORES=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y
# CONFIG_I2C_EG20T is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_WM831X_BACKUP=y
# CONFIG_WM831X_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SBS=y
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_TWL4030 is not set
CONFIG_CHARGER_LP8727=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
CONFIG_SENSORS_DS1621=y
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_FSCHMD=y
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4261=y
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MCP3021=y
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
# CONFIG_SENSORS_ADM1275 is not set
# CONFIG_SENSORS_LM25066 is not set
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_MAX16064=y
# CONFIG_SENSORS_MAX34440 is not set
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_UCD9000 is not set
# CONFIG_SENSORS_UCD9200 is not set
CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_SHT21 is not set
CONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=y
# CONFIG_SENSORS_SCH5627 is not set
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_ADS1015=y
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=y
# CONFIG_SENSORS_W83795_FANCTRL is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_SPEAR_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
# CONFIG_BCMA_HOST_PCI is not set
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_MADC is not set
# CONFIG_MFD_TWL4030_AUDIO is not set
CONFIG_TWL6030_PWM=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_STMPE=y
#
# STMPE Interface Drivers
#
# CONFIG_STMPE_I2C is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_S5M_CORE is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_CS5535=y
# CONFIG_LPC_SCH is not set
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_WL1273_CORE=y
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
# CONFIG_DRM is not set
CONFIG_STUB_POULSBO=y
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
CONFIG_FB_CYBER2000_DDC=y
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=y
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
CONFIG_FB_RIVA_DEBUG=y
# CONFIG_FB_RIVA_BACKLIGHT is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
CONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
# CONFIG_FB_ATY_CT is not set
# CONFIG_FB_ATY_GX is not set
CONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_3DFX_I2C is not set
CONFIG_FB_VOODOO1=y
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
# CONFIG_FB_GEODE_LX is not set
CONFIG_FB_GEODE_GX=y
CONFIG_FB_GEODE_GX1=y
# CONFIG_FB_TMIO is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
CONFIG_FB_BROADSHEET=y
CONFIG_EXYNOS_VIDEO=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_SAHARA=y
# CONFIG_BACKLIGHT_WM831X is not set
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_LP855X is not set
CONFIG_BACKLIGHT_OT200=y
# CONFIG_BACKLIGHT_PANDORA is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
CONFIG_FONT_7x14=y
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
CONFIG_FONT_10x18=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_UWB=y
CONFIG_UWB_WHCI=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_CLKGATE=y
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SDRICOH_CS=y
# CONFIG_MMC_CB710 is not set
CONFIG_MMC_VIA_SDMMC=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_WM831X_STATUS is not set
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_INTEL_SS4200=y
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_OT200=y
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_ISL1208=y
# CONFIG_RTC_DRV_ISL12022 is not set
CONFIG_RTC_DRV_X1205=y
# CONFIG_RTC_DRV_PCF8563 is not set
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_TWL4030 is not set
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=y
# CONFIG_RTC_DRV_RX8581 is not set
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
# CONFIG_RTC_DRV_RV3029C2 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_WM831X is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
#
# Xen driver support
#
# CONFIG_XEN_BALLOON is not set
CONFIG_XEN_DEV_EVTCHN=y
# CONFIG_XEN_BACKEND is not set
CONFIG_XENFS=y
# CONFIG_XEN_COMPAT_XENFS is not set
# CONFIG_XEN_SYS_HYPERVISOR is not set
# CONFIG_XEN_GNTDEV is not set
CONFIG_XEN_GRANT_DEV_ALLOC=y
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_PRIVCMD=y
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_STATS is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
#
# DEVFREQ Drivers
#
# CONFIG_MODEM_SHM is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_EFI_VARS is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4_USE_FOR_EXT23 is not set
# CONFIG_EXT4_FS_XATTR is not set
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_BTRFS_FS_CHECK_INTEGRITY=y
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
CONFIG_BEFS_FS=y
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_LOGFS=y
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG2=y
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
# CONFIG_9P_FSCACHE is not set
CONFIG_9P_FS_POSIX_ACL=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_PROTECTED_LINKS=y
# CONFIG_PROTECTED_SYMLINKS is not set
CONFIG_PROTECTED_SYMLINKS_SYSCTL=0
CONFIG_PROTECTED_HARDLINKS=y
CONFIG_PROTECTED_HARDLINKS_SYSCTL=1
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST_RUNNABLE is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
CONFIG_KGDB_TESTS_ON_BOOT=y
CONFIG_KGDB_TESTS_BOOT_STRING="V1F100"
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_KEYBOARD=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_TEST_KSTRTOX=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
CONFIG_IOMMU_DEBUG=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_DEBUG_NMI_SELFTEST=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
# CONFIG_CRYPTO_RMD256 is not set
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
CONFIG_CRYPTO_DEV_PADLOCK_SHA=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_BTREE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
CONFIG_CORDIC=y
^ permalink raw reply
* Re: + drivers-mfd-twl-corec-wtf-isnt-this-fixed-yet.patch added to -mm tree
From: Grant Likely @ 2012-02-27 22:09 UTC (permalink / raw)
To: Randy Dunlap
Cc: akpm, mm-commits, b-cousson, balajitk, gg, rob.herring, sameo,
linux-next
In-Reply-To: <4F4BC170.7060804@xenotime.net>
On Mon, Feb 27, 2012 at 10:46 AM, Randy Dunlap <rdunlap@xenotime.net> wrote:
> On 02/24/2012 03:31 PM, Grant Likely wrote:
>
>> On Fri, Feb 24, 2012 at 02:27:28PM -0800, akpm@linux-foundation.org wrote:
>>>
>>> The patch titled
>>> Subject: drivers/mfd/twl-core.c: wtf isn't this fixed yet??
>>> has been added to the -mm tree. Its filename is
>>> drivers-mfd-twl-corec-wtf-isnt-this-fixed-yet.patch
>>>
>>> Before you just go and hit "reply", please:
>>> a) Consider who else should be cc'ed
>>> b) Prefer to cc a suitable mailing list as well
>>> c) Ideally: find the original patch on the mailing list and do a
>>> reply-to-all to that, adding suitable additional cc's
>>>
>>> *** Remember to use Documentation/SubmitChecklist when testing your code ***
>>>
>>> The -mm tree is included into linux-next and is updated
>>> there every 3-4 working days
>>
>> Hi Andrew,
>>
>> I've posted patchs to fix this today, and I'll push it out to my tree
>> on the weekend so that Monday's linux-next will have this finally solved.
>
>
> Did these patches get pushed??
>
> linux-next of 20120227 still has build errors in twl-core.c:
>
> drivers/mfd/twl-core.c:1237:2: error: implicit declaration of function 'irq_alloc_descs'
> drivers/mfd/twl-core.c:1332:3: error: implicit declaration of function 'of_platform_populate'
>
> on both i386 and x86_64.
I pushed it out, it is in linux-next, and next-20120227 built fine for
me. Can you send me your .config?
g.
^ permalink raw reply
* Re: [PATCH v2] parisc: dont unconditionally override CROSS_COMPILE for 64 bit.
From: James Bottomley @ 2012-02-27 22:03 UTC (permalink / raw)
To: Paul Gortmaker
Cc: kyle@mcmartin.ca, deller@gmx.de, vapier@gentoo.org,
dave.anglin@bell.net, linux-parisc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-next@vger.kernel.org
In-Reply-To: <1330378864.2822.92.camel@dabdike.int.hansenpartnership.com>
On Mon, 2012-02-27 at 21:41 +0000, James Bottomley wrote:
> On Mon, 2012-02-27 at 15:59 -0500, Paul Gortmaker wrote:
> > Using the 64 bit toolchains from kernel.org[1], one finds that
> > you can't build the a500_defconfig, because the Makefile will
> > stomp whatever value you have in your env. for CROSS_COMPILE.
> >
> > This shows up since the kernel.org toolchains for parisc-64
> > do not have the "-gnu" prefix, and so you run into it always
> > saying hppa64-linux-gnu-gcc not found, regardless of the fact
> > you've not got "-gnu" put anywhere into CROSS_COMPILE.
> >
> > Since you can set CROSS_COMPILE from the environment and/or set
> > it in your .config file, there really is no need for it to be
> > poked at by the Makefile at all. So just delete it.
> >
> > [1] ftp://ftp.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.2/
> >
> > Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
> > ---
> >
> > [v2: no ifdef/endif -- just delete the offending line.]
> >
> > diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
> > index 55cca1d..a533367 100644
> > --- a/arch/parisc/Makefile
> > +++ b/arch/parisc/Makefile
> > @@ -31,7 +31,6 @@ ifdef CONFIG_64BIT
> > UTS_MACHINE := parisc64
> > CHECKFLAGS += -D__LP64__=1 -m64
> > WIDTH := 64
> > -CROSS_COMPILE := hppa64-linux-gnu-
> > else # 32-bit
> > WIDTH :=
> > endif
>
> We can't do that ... it crashes a standard build almost immediately
> because it doesn't pick the 64 bit compiler (and we have no biarch
> solution).
>
> We need make on a 64 bit config to work out of the box. It breaks
> with ?= as JDA pointed out because CROSS_COMPILE is always defined.
> Does this satisfy everyone?
>
> James
>
> ---
>
> diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
> index 55cca1d..19ab7b2 100644
> --- a/arch/parisc/Makefile
> +++ b/arch/parisc/Makefile
> @@ -31,7 +31,11 @@ ifdef CONFIG_64BIT
> UTS_MACHINE := parisc64
> CHECKFLAGS += -D__LP64__=1 -m64
> WIDTH := 64
> +
> +# FIXME: if no default set, should really try to locate dynamically
> +ifeq ($(CROSS_COMPILE),)
> CROSS_COMPILE := hppa64-linux-gnu-
> +endif
> else # 32-bit
> WIDTH :=
> endif
There's an awful lot more than just this wrong with that Makefile. For
instance, NATIVE can never be set because ifeq() isn't globbing in make
scripts ... So I think a final (and dynamically choosing if unset)
solution is this one.
I'll stop now before I find something else wrong ...
James
---
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 55cca1d..c823f4a 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -23,24 +23,20 @@ NM = sh $(srctree)/arch/parisc/nm
CHECKFLAGS += -D__hppa__=1
MACHINE := $(shell uname -m)
-ifeq ($(MACHINE),parisc*)
-NATIVE := 1
-endif
ifdef CONFIG_64BIT
UTS_MACHINE := parisc64
CHECKFLAGS += -D__LP64__=1 -m64
WIDTH := 64
-CROSS_COMPILE := hppa64-linux-gnu-
+
+# if no default set, try to find the corresponding 64 bit compiler
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE := $(shell $(CC) -dumpmachine | sed s/hppa-\\\(.*\\\)/hppa64-\\1-/)
+endif
else # 32-bit
WIDTH :=
endif
-# attempt to help out folks who are cross-compiling
-ifeq ($(NATIVE),1)
-CROSS_COMPILE := hppa$(WIDTH)-linux-
-endif
-
OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
cflags-y := -pipe
^ permalink raw reply related
* Re: [PATCH] sound: fix trivial build error in mpc5200_dma.c
From: Timur Tabi @ 2012-02-27 21:56 UTC (permalink / raw)
To: Mark Brown; +Cc: Paul Gortmaker, perex, tiwai, lrg, linux-next
In-Reply-To: <20120227145926.GK3191@opensource.wolfsonmicro.com>
Mark Brown wrote:
> Please also try to use changelog headers consistent with the subsystem.
Can you explain what that means? What are "changelog headers"?
--
Timur Tabi
Linux kernel developer at Freescale
^ permalink raw reply
* Re: [PATCH v2] parisc: dont unconditionally override CROSS_COMPILE for 64 bit.
From: James Bottomley @ 2012-02-27 21:41 UTC (permalink / raw)
To: Paul Gortmaker
Cc: kyle@mcmartin.ca, deller@gmx.de, vapier@gentoo.org,
dave.anglin@bell.net, linux-parisc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-next@vger.kernel.org
In-Reply-To: <1330376359-23731-1-git-send-email-paul.gortmaker@windriver.com>
On Mon, 2012-02-27 at 15:59 -0500, Paul Gortmaker wrote:
> Using the 64 bit toolchains from kernel.org[1], one finds that
> you can't build the a500_defconfig, because the Makefile will
> stomp whatever value you have in your env. for CROSS_COMPILE.
>
> This shows up since the kernel.org toolchains for parisc-64
> do not have the "-gnu" prefix, and so you run into it always
> saying hppa64-linux-gnu-gcc not found, regardless of the fact
> you've not got "-gnu" put anywhere into CROSS_COMPILE.
>
> Since you can set CROSS_COMPILE from the environment and/or set
> it in your .config file, there really is no need for it to be
> poked at by the Makefile at all. So just delete it.
>
> [1] ftp://ftp.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.5.2/
>
> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
> ---
>
> [v2: no ifdef/endif -- just delete the offending line.]
>
> diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
> index 55cca1d..a533367 100644
> --- a/arch/parisc/Makefile
> +++ b/arch/parisc/Makefile
> @@ -31,7 +31,6 @@ ifdef CONFIG_64BIT
> UTS_MACHINE := parisc64
> CHECKFLAGS += -D__LP64__=1 -m64
> WIDTH := 64
> -CROSS_COMPILE := hppa64-linux-gnu-
> else # 32-bit
> WIDTH :=
> endif
We can't do that ... it crashes a standard build almost immediately
because it doesn't pick the 64 bit compiler (and we have no biarch
solution).
We need make on a 64 bit config to work out of the box. It breaks
with ?= as JDA pointed out because CROSS_COMPILE is always defined.
Does this satisfy everyone?
James
---
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 55cca1d..19ab7b2 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -31,7 +31,11 @@ ifdef CONFIG_64BIT
UTS_MACHINE := parisc64
CHECKFLAGS += -D__LP64__=1 -m64
WIDTH := 64
+
+# FIXME: if no default set, should really try to locate dynamically
+ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := hppa64-linux-gnu-
+endif
else # 32-bit
WIDTH :=
endif
^ permalink raw reply related
* Re: linux-next: Tree for Feb 27 (usbtouchscreen)
From: Daniel Ritz @ 2012-02-27 21:38 UTC (permalink / raw)
To: Armando Visconti, Viresh Kumar
Cc: Randy Dunlap, Stephen Rothwell, linux-next, LKML, linux-input,
Dmitry Torokhov
In-Reply-To: <4F4BC717.1000304@xenotime.net>
On 2012-02-27 19:10 , Randy Dunlap wrote:
> On 02/26/2012 11:20 PM, Stephen Rothwell wrote:
>
>> Hi all,
>>
>> Changes since 20120224:
>
>
>
> on x86_64:
>
> drivers/input/touchscreen/usbtouchscreen.c:1232:18: error: 'usbtouch_process_multi' undeclared here (not in a function)
>
>
> Full randconfig file is attached.
>
Hi
I had a quick look with gitweb. The following change causes the problem, comments inline:
> From: Armando Visconti <armando.visconti@st.com>
> Date: Fri, 24 Feb 2012 08:51:37 +0000 (-0800)
> Subject: Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
> X-Git-Tag: next-20120227~55^2~4
> X-Git-Url:
http://git.kernel.org/gitweb.cgi?p=linux%2Fkernel%2Fgit%2Fnext%2Flinux-next.git;a=commitdiff_plain;h=e6307aa07c5a11022f0ccee19a8ff0ba033eeb93
>
> Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
>
> The Data Modul TP 72037 EasyTouch controller is derived from EGALAX
> controller and is capable of detecting dual contacts. Packets can be 5
> bytes or 10 bytes long, depending whether one or two contacts are
> detected. Format is same as EGALAX touch controller, but with x and y
> coordinates inverted.
>
> Signed-off-by: Armando Visconti <armando.visconti@st.com>
> Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
> ---
>
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 2b21a70..2acf16f 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -607,6 +607,7 @@ config TOUCHSCREEN_USB_COMPOSITE
> - JASTEC USB Touch Controller/DigiTech DTR-02U
> - Zytronic controllers
> - Elo TouchSystems 2700 IntelliTouch
> + - EasyTouch USB Touch Controller from Data Modul
>
> Have a look at <http://linux.chapter7.ch/touchkit/> for
> a usage description and the required user-space stuff.
> @@ -711,6 +712,14 @@ config TOUCHSCREEN_USB_NEXIO
> bool "NEXIO/iNexio device support" if EXPERT
> depends on TOUCHSCREEN_USB_COMPOSITE
>
> +config TOUCHSCREEN_USB_EASYTOUCH
> + default y
> + bool "EasyTouch USB Touch controller device support" if EMBEDDED
> + depends on TOUCHSCREEN_USB_COMPOSITE
> + help
> + Say Y here if you have a EasyTouch USB Touch controller device support.
> + If unsure, say N.
> +
> config TOUCHSCREEN_TOUCHIT213
> tristate "Sahara TouchIT-213 touchscreen"
> select SERIO
> diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
> index 9dbd8b4..5813089 100644
> --- a/drivers/input/touchscreen/usbtouchscreen.c
> +++ b/drivers/input/touchscreen/usbtouchscreen.c
> @@ -17,6 +17,7 @@
> * - Zytronic capacitive touchscreen
> * - NEXIO/iNexio
> * - Elo TouchSystems 2700 IntelliTouch
> + * - EasyTouch USB Dual/Multi touch controller from Data Modul
> *
> * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
> * Copyright (C) by Todd E. Johnson (mtouchusb.c)
> @@ -140,6 +141,7 @@ enum {
> DEVTYPE_TC45USB,
> DEVTYPE_NEXIO,
> DEVTYPE_ELO,
> + DEVTYPE_ETOUCH,
> };
>
> #define USB_DEVICE_HID_CLASS(vend, prod) \
> @@ -245,6 +247,10 @@ static const struct usb_device_id usbtouch_devices[] = {
> {USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO},
> #endif
>
> +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
> + {USB_DEVICE(0x7374, 0x0001), .driver_info = DEVTYPE_ETOUCH},
> +#endif
> +
> {}
> };
>
> @@ -326,6 +332,47 @@ static int egalax_get_pkt_len(unsigned char *buf, int len)
> }
> #endif
>
> +/*****************************************************************************
> + * EasyTouch part
> + */
> +
> +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
here, some lines are missing:
#ifndef MULTI_PACKET
#define MULTI_PACKET
#endif
adding these will fix the compile error.
> +
> +#define EGALAX_PKT_TYPE_MASK 0xFE
> +#define EGALAX_PKT_TYPE_REPT 0x80
> +#define EGALAX_PKT_TYPE_REPT2 0xB0
> +#define EGALAX_PKT_TYPE_DIAG 0x0A
The names here are wrong. The prefix EGALAX_ is only for eGalax controllers and some
of them are already defined in the eGalax part of the driver. This will re-define them
which is not good. Please use ETOUCH_... instead.
> +
> +static int etouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
> +{
> + if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT &&
> + (pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT2)
> + return 0;
> +
> + dev->x = ((pkt[1] & 0x1F) << 7) | (pkt[2] & 0x7F);
> + dev->y = ((pkt[3] & 0x1F) << 7) | (pkt[4] & 0x7F);
> + dev->touch = pkt[0] & 0x01;
> +
> + return 1;
> +}
> +
> +static int etouch_get_pkt_len(unsigned char *buf, int len)
> +{
> + switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
> + case EGALAX_PKT_TYPE_REPT:
> + case EGALAX_PKT_TYPE_REPT2:
> + return 5;
The description states that packets can be 10 bytes long, but this case is not
handled here. How does the 10 byte packet look like? Is it two five byte packets?
How is the format? What is contained in the other 5 bytes?
Anyway: if it's two 5 byte packets, shouldn't the data from both packets be used
for _one_ input event for increased accuracy or something?
If it's not two 5 byte packets, the function must return 10 for a 10 byte packet.
Otherwise the driver will have to sync for each packet (which works fine but is slower).
> +
> + case EGALAX_PKT_TYPE_DIAG:
> + if (len < 2)
> + return -1;
> +
> + return buf[1] + 2;
> + }
> +
> + return 0;
> +}
> +#endif
>
> /*****************************************************************************
> * PanJit Part
> @@ -1175,6 +1222,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
> .exit = nexio_exit,
> },
> #endif
> +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
> + [DEVTYPE_ETOUCH] = {
> + .min_xc = 0x0,
> + .max_xc = 0x07ff,
> + .min_yc = 0x0,
> + .max_yc = 0x07ff,
> + .rept_size = 16,
> + .process_pkt = usbtouch_process_multi,
> + .get_pkt_len = etouch_get_pkt_len,
> + .read_data = etouch_read_data,
> + },
> +#endif
> };
>
>
Cheers
-daniel
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox