From: Thomas Haynes <loghyr@gmail.com>
To: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Mkrtchyan, Tigran" <tigran.mkrtchyan@desy.de>,
Bruce Fields <bfields@redhat.com>,
linux-nfs <linux-nfs@vger.kernel.org>
Subject: Re: [pynfs 00/10] Misc Fixes, primarily LAYOUTRETURN
Date: Fri, 18 Dec 2020 08:38:54 -0800 [thread overview]
Message-ID: <129D549F-66DC-43FE-B303-042442CDAAC8@gmail.com> (raw)
In-Reply-To: <20201218163721.GC1258@fieldses.org>
> On Dec 18, 2020, at 8:37 AM, J. Bruce Fields <bfields@fieldses.org> wrote:
>
> On Fri, Dec 18, 2020 at 05:23:58PM +0100, Mkrtchyan, Tigran wrote:
>>
>> I run the tests. They fail due to python3 incompatibility:
>
> Thanks! I can't reproduce these, I assume because they're failing too
> early?:
>
> FFLA1 st_flex.testFlexLayoutTestAccess : RUNNING
> FFLA1 st_flex.testFlexLayoutTestAccess : FAILURE
> OP_LAYOUTGET should return NFS4_OK, instead got
> NFS4ERR_LAYOUTUNAVAILABLE
>
> They're probably easy fixes, but I'd rather leave them up to somebody
> that can test the result. Patches on top of these would be best.
>
I’ll do that - but note that they were failing before my patch set.
> --b.
>
>>
>> FFST1 st_flex.testStateid1 : PASS
>> FFLA1 st_flex.testFlexLayoutTestAccess : FAILURE
>> Expected uid_rd != b'17', got b'17'
>> FFLG2 st_flex.testFlexLayoutStress : FAILURE
>> TypeError: can only concatenate str (not "bytes") to
>> str
>> FFLS3 st_flex.testFlexLayoutStatsStraight : FAILURE
>> TypeError: can only concatenate str (not "bytes") to
>> str
>> FFLS1 st_flex.testFlexLayoutStatsSmall : FAILURE
>> TypeError: can't concat str to bytes
>> FFLS2 st_flex.testFlexLayoutStatsReset : FAILURE
>> TypeError: can only concatenate str (not "bytes") to
>> str
>> FFLS4 st_flex.testFlexLayoutStatsOverflow : FAILURE
>> TypeError: can only concatenate str (not "bytes") to
>> str
>> FFLORSTALEWRITE st_flex.testFlexLayoutReturnStaleWrite : FAILURE
>> OP_LAYOUTGET should return NFS4_OK or NFS4ERR_DELAY or
>> NFS4ERR_STALE, instead got NFS4ERR_LAYOUTUNAVAILABLE
>> FFLORSTALEREAD st_flex.testFlexLayoutReturnStaleRead : FAILURE
>> OP_LAYOUTGET should return NFS4_OK, instead got
>> NFS4ERR_LAYOUTTRYLATER
>> FFLORSERVERFAULTWRITE st_flex.testFlexLayoutReturnServerFaultWrite : FAILURE
>> OP_LAYOUTGET should return NFS4_OK or NFS4ERR_DELAY or
>> NFS4ERR_SERVERFAULT, instead got
>> NFS4ERR_LAYOUTUNAVAILABLE
>> FFLORSERVERFAULTREAD st_flex.testFlexLayoutReturnServerFaultRead : FAILURE
>> OP_LAYOUTGET should return NFS4_OK, instead got
>> NFS4ERR_LAYOUTTRYLATER
>> FFLORNXIOWRITE st_flex.testFlexLayoutReturnNxioWrite : FAILURE
>> OP_LAYOUTGET should return NFS4_OK or NFS4ERR_DELAY or
>> NFS4ERR_NXIO, instead got NFS4ERR_LAYOUTUNAVAILABLE
>> FFLORNXIOREAD st_flex.testFlexLayoutReturnNxioRead : FAILURE
>> OP_LAYOUTGET should return NFS4_OK, instead got
>> NFS4ERR_LAYOUTTRYLATER
>> FFLORNOSPCWRITE st_flex.testFlexLayoutReturnNospcWrite : FAILURE
>> OP_LAYOUTGET should return NFS4_OK or NFS4ERR_DELAY or
>> NFS4ERR_NOSPC, instead got NFS4ERR_LAYOUTUNAVAILABLE
>> FFLORNOSPC st_flex.testFlexLayoutReturnNospcRead : FAILURE
>> OP_LAYOUTGET should return NFS4_OK, instead got
>> NFS4ERR_LAYOUTUNAVAILABLE
>> FFLORIOWRITE st_flex.testFlexLayoutReturnIoWrite : FAILURE
>> OP_LAYOUTGET should return NFS4_OK or NFS4ERR_DELAY or
>> NFS4ERR_IO, instead got NFS4ERR_LAYOUTUNAVAILABLE
>> FFLORIOREAD st_flex.testFlexLayoutReturnIoRead : FAILURE
>> OP_LAYOUTGET should return NFS4_OK, instead got
>> NFS4ERR_LAYOUTTRYLATER
>> FFLORFBIGWRITE st_flex.testFlexLayoutReturnFbigWrite : FAILURE
>> OP_LAYOUTGET should return NFS4_OK or NFS4ERR_DELAY or
>> NFS4ERR_FBIG, instead got NFS4ERR_LAYOUTUNAVAILABLE
>> FFLORFBIG st_flex.testFlexLayoutReturnFbigRead : FAILURE
>> OP_LAYOUTGET should return NFS4_OK, instead got
>> NFS4ERR_LAYOUTUNAVAILABLE
>> FFLORDELAYWRITE st_flex.testFlexLayoutReturnDelayWrite : FAILURE
>> OP_LAYOUTGET should return NFS4_OK or NFS4ERR_DELAY,
>> instead got NFS4ERR_LAYOUTUNAVAILABLE
>> FFLORDELAYREAD st_flex.testFlexLayoutReturnDelayRead : FAILURE
>> OP_LAYOUTGET should return NFS4_OK, instead got
>> NFS4ERR_LAYOUTTRYLATER
>> FFLORACCESSWRITE st_flex.testFlexLayoutReturnAccessWrite : FAILURE
>> OP_LAYOUTGET should return NFS4_OK or NFS4ERR_DELAY or
>> NFS4ERR_ACCESS, instead got NFS4ERR_LAYOUTUNAVAILABLE
>> FFLORACCESSREAD st_flex.testFlexLayoutReturnAccessRead : FAILURE
>> OP_LAYOUTGET should return NFS4_OK, instead got
>> NFS4ERR_LAYOUTTRYLATER
>> FFLOR100 st_flex.testFlexLayoutReturn100 : FAILURE
>> NameError: name 'xrange' is not defined
>> FFLOOS st_flex.testFlexLayoutOldSeqid : FAILURE
>> TypeError: can only concatenate str (not "bytes") to
>> str
>> FFGLO1 st_flex.testFlexGetLayout : FAILURE
>> OP_LAYOUTGET should return NFS4_OK, instead got
>> NFS4ERR_LAYOUTTRYLATER
>> FFGDI1 st_flex.testFlexGetDevInfo : FAILURE
>> TypeError: can only concatenate str (not "bytes") to
>> str
>>
>>
>> Regards,
>> Tigran.
>>
>>
>>
>> ----- Original Message -----
>>> From: "J. Bruce Fields" <bfields@fieldses.org>
>>> To: "Tom Haynes" <loghyr@gmail.com>
>>> Cc: "bfields" <bfields@redhat.com>, "linux-nfs" <linux-nfs@vger.kernel.org>
>>> Sent: Friday, 18 December, 2020 15:46:05
>>> Subject: Re: [pynfs 00/10] Misc Fixes, primarily LAYOUTRETURN
>>
>>> On Wed, Dec 16, 2020 at 04:35:06PM -0800, Tom Haynes wrote:
>>>> Hi Bruce,
>>>>
>>>> Here are a series of patches that Hamerspace has applied to the
>>>> flex files testing.
>>>
>>> Thanks, applying.
>>>
>>> I'm pretty hands-off when it comes to pynfs tests I don't personally
>>> run. If they work for you then I'm probably fine with them....
>>>
>>> --b.
>>>
>>>>
>>>> Thanks,
>>>> Tom
>>>>
>>>> Jean Spector (2):
>>>> st_flex.py - Added tests for LAYOUTRETURN with errors
>>>> st_flex.py - Fixed flag names
>>>>
>>>> Tom Haynes (7):
>>>> Close the file for SEQ10b
>>>> flexfiles: Fix up the layout error handling to reflect the previous
>>>> error
>>>> st_flex: Reduce the layoutstats period to make tests finish in a sane
>>>> time
>>>> st_flex: Fix up test names
>>>> st_flex: Only do 100 layoutget/return in loop
>>>> st_flex: We can't return the layout without a layout stateid
>>>> st_flex: Fixup check for error in layoutget_return()
>>>>
>>>> Trond Myklebust (1):
>>>> Fix testFlexLayoutOldSeqid
>>>>
>>>> nfs4.1/server41tests/st_flex.py | 651 +++++++++++++++++++++++++---
>>>> nfs4.1/server41tests/st_sequence.py | 5 +
>>>> 2 files changed, 588 insertions(+), 68 deletions(-)
>>>>
>>>> --
>>>> 2.26.2
next prev parent reply other threads:[~2020-12-18 16:39 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-17 0:35 [pynfs 00/10] Misc Fixes, primarily LAYOUTRETURN Tom Haynes
2020-12-17 0:35 ` [pynfs 01/10] st_flex.py - Added tests for LAYOUTRETURN with errors Tom Haynes
2020-12-17 0:35 ` [pynfs 02/10] st_flex.py - Fixed flag names Tom Haynes
2020-12-17 0:35 ` [pynfs 03/10] Close the file for SEQ10b Tom Haynes
2020-12-18 16:43 ` J. Bruce Fields
2020-12-21 2:42 ` Thomas Haynes
2020-12-21 2:46 ` J. Bruce Fields
2020-12-17 0:35 ` [pynfs 04/10] flexfiles: Fix up the layout error handling to reflect the previous error Tom Haynes
2020-12-17 0:35 ` [pynfs 05/10] Fix testFlexLayoutOldSeqid Tom Haynes
2020-12-17 0:35 ` [pynfs 06/10] st_flex: Reduce the layoutstats period to make tests finish in a sane time Tom Haynes
2020-12-17 0:35 ` [pynfs 07/10] st_flex: Fix up test names Tom Haynes
2020-12-17 0:35 ` [pynfs 08/10] st_flex: Only do 100 layoutget/return in loop Tom Haynes
2020-12-17 0:35 ` [pynfs 09/10] st_flex: We can't return the layout without a layout stateid Tom Haynes
2020-12-17 0:35 ` [pynfs 10/10] st_flex: Fixup check for error in layoutget_return() Tom Haynes
2020-12-18 14:46 ` [pynfs 00/10] Misc Fixes, primarily LAYOUTRETURN J. Bruce Fields
2020-12-18 16:23 ` Mkrtchyan, Tigran
2020-12-18 16:37 ` J. Bruce Fields
2020-12-18 16:38 ` Thomas Haynes [this message]
2020-12-18 16:50 ` Mkrtchyan, Tigran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=129D549F-66DC-43FE-B303-042442CDAAC8@gmail.com \
--to=loghyr@gmail.com \
--cc=bfields@fieldses.org \
--cc=bfields@redhat.com \
--cc=linux-nfs@vger.kernel.org \
--cc=tigran.mkrtchyan@desy.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox