Linux NFS development
 help / color / mirror / Atom feed
From: "Hans-Peter Jansen" <hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
To: linux-nfs@vger.kernel.org
Subject: Re: klibc's nfsmount failure with 2.6.27.21, while 2.6.25.20 was fine
Date: Wed, 15 Apr 2009 21:16:48 +0200	[thread overview]
Message-ID: <200904152116.48337.hpj@urpla.net> (raw)
In-Reply-To: <BCC012A8-842D-4699-917C-47ADF25446C7@oracle.com>

[-- Attachment #1: Type: text/plain, Size: 2290 bytes --]

Am Mittwoch, 15. April 2009 schrieb Chuck Lever:
> On Apr 15, 2009, at 1:23 PM, Hans-Peter Jansen wrote:
> > Am Mittwoch, 15. April 2009 schrieb Chuck Lever:
> >> When using rpcbind instead of portmapper, what does the output of
> >> "rpcinfo" look like on the server?
> >
> > It's dumped in the mail starting this thread.
>
> I don't see why the client's rpcbind attempt for the server's mountd
> service should have failed.

For completeness, here's the current rpcinfo view with portmap:

# rpcinfo -p 172.16.23.110
   Program Vers Proto   Port
    100000    2   tcp    111  portmapper
    100000    2   udp    111  portmapper
    100005    1   udp  54838  mountd
    100005    1   tcp  32772  mountd
    100005    2   udp  54838  mountd
    100005    2   tcp  32772  mountd
    100005    3   udp  54838  mountd
    100005    3   tcp  32772  mountd
    100003    2   udp   2049  nfs
    100003    3   udp   2049  nfs
    100003    4   udp   2049  nfs
    100021    1   udp  35501  nlockmgr
    100021    3   udp  35501  nlockmgr
    100021    4   udp  35501  nlockmgr
    100003    2   tcp   2049  nfs
    100003    3   tcp   2049  nfs
    100003    4   tcp   2049  nfs
    100021    1   tcp  54766  nlockmgr
    100021    3   tcp  54766  nlockmgr
    100021    4   tcp  54766  nlockmgr
    100024    1   udp  44650  status
    100024    1   tcp  39765  status


> Would it be possible for you to capture a packet trace of the client's
> attempt to mount it's root file system?  (You will likely need to do
> this for a bugzilla report, anyway).

Ähem, Chuck, may I ask you to look into the initial mail again. The failing 
case is attached there. Here I've attached the good one. Since I couldn't 
locate any mount attempt in the dump, I've left a few more nfs 
transactions.

> Also let us know what's running on your clients (distribution, kernel
> version, etc).

Hmm, sure. The client setup is a legacy SuSE 9.3 diskless environment 
(unfortunately Novell didn't manage to create a distribution with similar 
stability since then..., being a rpm junke, I will soon check Cent-OS 
(again)).

Client (relevant) versions:
Kernel: 2.6.11.4
Udev (nfsmount): 053

Let me know, what more I can provide, please.

THanks,
Pete

[-- Attachment #2: shark-nfs-mount-ok.dump --]
[-- Type: application/octet-stream, Size: 11534 bytes --]

  reply	other threads:[~2009-04-15 19:16 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-15 10:50 klibc's nfsmount failure with 2.6.27.21, while 2.6.25.20 was fine Hans-Peter Jansen
     [not found] ` <200904151250.49372.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 12:38   ` Trond Myklebust
     [not found]     ` <1239799114.5177.4.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2009-04-15 13:48       ` Hans-Peter Jansen
     [not found]         ` <200904151548.12291.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 14:36           ` Chuck Lever
2009-04-15 17:23             ` Hans-Peter Jansen
     [not found]               ` <200904151923.58709.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 17:35                 ` Chuck Lever
2009-04-15 19:16                   ` Hans-Peter Jansen [this message]
  -- strict thread matches above, loose matches on Subject: below --
2009-04-15 19:17 Hans-Peter Jansen
     [not found] ` <200904152117.41367.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 20:52   ` Chuck Lever
2009-04-15 22:48     ` Hans-Peter Jansen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200904152116.48337.hpj@urpla.net \
    --to=hpj-2x7n3sizjbfeowh0uzbu5w@public.gmane.org \
    --cc=linux-nfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox