From: "Hans-Peter Jansen" <hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
To: linux-nfs@vger.kernel.org, Chuck Lever <chuck.lever@oracle.com>,
Trond Myklebust <trond.myklebust@fys.uio.no>
Subject: Re: klibc's nfsmount failure with 2.6.27.21, while 2.6.25.20 was fine
Date: Wed, 15 Apr 2009 21:17:40 +0200 [thread overview]
Message-ID: <200904152117.41367.hpj@urpla.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 2290 bytes --]
Am Mittwoch, 15. April 2009 schrieb Chuck Lever:
> On Apr 15, 2009, at 1:23 PM, Hans-Peter Jansen wrote:
> > Am Mittwoch, 15. April 2009 schrieb Chuck Lever:
> >> When using rpcbind instead of portmapper, what does the output of
> >> "rpcinfo" look like on the server?
> >
> > It's dumped in the mail starting this thread.
>
> I don't see why the client's rpcbind attempt for the server's mountd
> service should have failed.
For completeness, here's the current rpcinfo view with portmap:
# rpcinfo -p 172.16.23.110
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100005 1 udp 54838 mountd
100005 1 tcp 32772 mountd
100005 2 udp 54838 mountd
100005 2 tcp 32772 mountd
100005 3 udp 54838 mountd
100005 3 tcp 32772 mountd
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100021 1 udp 35501 nlockmgr
100021 3 udp 35501 nlockmgr
100021 4 udp 35501 nlockmgr
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100021 1 tcp 54766 nlockmgr
100021 3 tcp 54766 nlockmgr
100021 4 tcp 54766 nlockmgr
100024 1 udp 44650 status
100024 1 tcp 39765 status
> Would it be possible for you to capture a packet trace of the client's
> attempt to mount it's root file system? (You will likely need to do
> this for a bugzilla report, anyway).
Ähem, Chuck, may I ask you to look into the initial mail again. The failing
case is attached there. Here I've attached the good one. Since I couldn't
locate any mount attempt in the dump, I've left a few more nfs
transactions.
> Also let us know what's running on your clients (distribution, kernel
> version, etc).
Hmm, sure. The client setup is a legacy SuSE 9.3 diskless environment
(unfortunately Novell didn't manage to create a distribution with similar
stability since then..., being a rpm junke, I will soon check Cent-OS
(again)).
Client (relevant) versions:
Kernel: 2.6.11.4
Udev (nfsmount): 053
Let me know, what more I can provide, please.
THanks,
Pete
[-- Attachment #2: shark-nfs-mount-ok.dump --]
[-- Type: application/octet-stream, Size: 11534 bytes --]
next reply other threads:[~2009-04-15 19:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-15 19:17 Hans-Peter Jansen [this message]
[not found] ` <200904152117.41367.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 20:52 ` klibc's nfsmount failure with 2.6.27.21, while 2.6.25.20 was fine Chuck Lever
2009-04-15 22:48 ` Hans-Peter Jansen
-- strict thread matches above, loose matches on Subject: below --
2009-04-15 10:50 Hans-Peter Jansen
[not found] ` <200904151250.49372.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 12:38 ` Trond Myklebust
[not found] ` <1239799114.5177.4.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2009-04-15 13:48 ` Hans-Peter Jansen
[not found] ` <200904151548.12291.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 14:36 ` Chuck Lever
2009-04-15 17:23 ` Hans-Peter Jansen
[not found] ` <200904151923.58709.hpj-2x7n3sizJbFeoWH0uzbU5w@public.gmane.org>
2009-04-15 17:35 ` Chuck Lever
2009-04-15 19:16 ` Hans-Peter Jansen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200904152117.41367.hpj@urpla.net \
--to=hpj-2x7n3sizjbfeowh0uzbu5w@public.gmane.org \
--cc=chuck.lever@oracle.com \
--cc=linux-nfs@vger.kernel.org \
--cc=trond.myklebust@fys.uio.no \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox