From: Chuck Lever <chuck.lever@oracle.com>
To: linux-rdma@vger.kernel.org, linux-nfs@vger.kernel.org
Subject: [PATCH v1 00/13] NFS/RDMA patches for 3.17
Date: Mon, 23 Jun 2014 18:39:00 -0400 [thread overview]
Message-ID: <20140623223201.1634.83888.stgit@manet.1015granger.net> (raw)
The main purpose of this series is to address more connection drop
recovery issues by fixing FRMR re-use to make it less likely the
client will drop the connection due to a memory operation error.
Some other clean-ups and fixes are present as well.
See topic branch nfs-rdma-for-3.17 in
git://git.linux-nfs.org/projects/cel/cel-2.6.git
I tested with NFSv3 and NFSv4 on all three supported memory
registration modes. Used cthon04 and iozone with both Solaris
and Linux NFS/RDMA servers. Used xfstests with Linux.
---
Chuck Lever (13):
xprtrdma: Fix panic in rpcrdma_register_frmr_external()
xprtrdma: Protect ->qp during FRMR deregistration
xprtrdma: Limit data payload size for ALLPHYSICAL
xprtrdma: Update rkeys after transport reconnect
xprtrdma: Don't drain CQs on transport disconnect
xprtrdma: Unclutter struct rpcrdma_mr_seg
xprtrdma: Encode Work Request opcode in wc->wr_id
xprtrdma: Back off rkey when FAST_REG_MR fails
xprtrdma: Refactor rpcrdma_buffer_put()
xprtrdma: Release FRMR segment buffers during LOCAL_INV completion
xprtrdma: Clean up rpcrdma_ep_disconnect()
xprtrdma: Remove RPCRDMA_PERSISTENT_REGISTRATION macro
xprtrdma: Handle additional connection events
include/linux/sunrpc/xprtrdma.h | 2
net/sunrpc/xprtrdma/rpc_rdma.c | 77 +++++----
net/sunrpc/xprtrdma/transport.c | 17 +-
net/sunrpc/xprtrdma/verbs.c | 330 +++++++++++++++++++++++++++------------
net/sunrpc/xprtrdma/xprt_rdma.h | 63 ++++++-
5 files changed, 332 insertions(+), 157 deletions(-)
--
Chuck Lever
next reply other threads:[~2014-06-23 22:39 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-23 22:39 Chuck Lever [this message]
2014-06-23 22:39 ` [PATCH v1 01/13] xprtrdma: Fix panic in rpcrdma_register_frmr_external() Chuck Lever
2014-06-24 14:37 ` Or Gerlitz
2014-06-23 22:39 ` [PATCH v1 02/13] xprtrdma: Protect ->qp during FRMR deregistration Chuck Lever
2014-06-23 22:39 ` [PATCH v1 03/13] xprtrdma: Limit data payload size for ALLPHYSICAL Chuck Lever
2014-06-23 22:39 ` [PATCH v1 04/13] xprtrdma: Update rkeys after transport reconnect Chuck Lever
2014-06-23 22:39 ` [PATCH v1 05/13] xprtrdma: Don't drain CQs on transport disconnect Chuck Lever
2014-07-02 19:06 ` Devesh Sharma
2014-07-02 19:28 ` Steve Wise
2014-07-02 19:40 ` Chuck Lever
2014-07-02 19:46 ` Steve Wise
2014-07-02 19:48 ` Devesh Sharma
2014-07-02 19:59 ` Chuck Lever
2014-07-03 5:33 ` Devesh Sharma
2014-07-02 19:42 ` Devesh Sharma
2014-07-02 19:50 ` Steve Wise
2014-07-02 19:53 ` Devesh Sharma
2014-07-02 19:56 ` Steve Wise
2014-07-02 19:57 ` Devesh Sharma
2014-07-02 19:56 ` Devesh Sharma
2014-06-23 22:39 ` [PATCH v1 06/13] xprtrdma: Unclutter struct rpcrdma_mr_seg Chuck Lever
2014-06-23 22:39 ` [PATCH v1 07/13] xprtrdma: Encode Work Request opcode in wc->wr_id Chuck Lever
2014-06-23 22:40 ` [PATCH v1 08/13] xprtrdma: Back off rkey when FAST_REG_MR fails Chuck Lever
2014-06-24 15:47 ` Anna Schumaker
2014-06-24 16:26 ` Chuck Lever
2014-06-23 22:40 ` [PATCH v1 09/13] xprtrdma: Refactor rpcrdma_buffer_put() Chuck Lever
2014-06-23 22:40 ` [PATCH v1 10/13] xprtrdma: Release FRMR segment buffers during LOCAL_INV completion Chuck Lever
2014-06-25 5:17 ` Shirley Ma
2014-06-25 14:32 ` Chuck Lever
2014-06-25 16:14 ` Shirley Ma
2014-06-23 22:40 ` [PATCH v1 11/13] xprtrdma: Clean up rpcrdma_ep_disconnect() Chuck Lever
2014-06-23 22:40 ` [PATCH v1 12/13] xprtrdma: Remove RPCRDMA_PERSISTENT_REGISTRATION macro Chuck Lever
2014-06-23 22:40 ` [PATCH v1 13/13] xprtrdma: Handle additional connection events Chuck Lever
2014-06-24 15:58 ` Anna Schumaker
2014-06-24 14:35 ` [PATCH v1 00/13] NFS/RDMA patches for 3.17 Or Gerlitz
2014-06-24 17:07 ` Chuck Lever
2014-06-25 22:47 ` Steve Wise
2014-06-27 16:17 ` Shirley Ma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140623223201.1634.83888.stgit@manet.1015granger.net \
--to=chuck.lever@oracle.com \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox