From: Anna Schumaker <schumaker.anna@gmail.com>
To: Chuck Lever <chuck.lever@oracle.com>,
linux-rdma@vger.kernel.org, linux-nfs@vger.kernel.org
Subject: Re: [PATCH v1 08/13] xprtrdma: Back off rkey when FAST_REG_MR fails
Date: Tue, 24 Jun 2014 11:47:50 -0400 [thread overview]
Message-ID: <53A99DA6.90808@gmail.com> (raw)
In-Reply-To: <20140623224007.1634.55636.stgit@manet.1015granger.net>
On 06/23/2014 06:40 PM, Chuck Lever wrote:
> If posting a FAST_REG_MR Work Reqeust fails, or the FAST_REG WR
> flushes, revert the rkey update to avoid subsequent
> IB_WC_MW_BIND_ERR completions.
>
> Suggested-by: Steve Wise <swise@opengridcomputing.com>
> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
> ---
> net/sunrpc/xprtrdma/verbs.c | 39 +++++++++++++++++++++++++++++----------
> 1 file changed, 29 insertions(+), 10 deletions(-)
>
> diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
> index cef67fd..3efc007 100644
> --- a/net/sunrpc/xprtrdma/verbs.c
> +++ b/net/sunrpc/xprtrdma/verbs.c
> @@ -61,6 +61,8 @@
> # define RPCDBG_FACILITY RPCDBG_TRANS
> #endif
>
> +static void rpcrdma_decrement_frmr_rkey(struct rpcrdma_mw *);
> +
> /*
> * internal functions
> */
> @@ -154,13 +156,17 @@ rpcrdma_sendcq_process_wc(struct ib_wc *wc)
>
> if (wrid == 0)
> return;
> - if (wc->status != IB_WC_SUCCESS)
> - return;
>
> fastreg = test_and_clear_bit(RPCRDMA_BIT_FASTREG, &wrid);
> mw = (struct rpcrdma_mw *)wrid;
>
> - mw->r.frmr.fr_state = fastreg ? FRMR_IS_VALID : FRMR_IS_INVALID;
> + if (wc->status == IB_WC_SUCCESS) {
> + mw->r.frmr.fr_state = fastreg ?
> + FRMR_IS_VALID : FRMR_IS_INVALID;
> + } else {
> + if (fastreg)
> + rpcrdma_decrement_frmr_rkey(mw);
Isn't this the same as "else if (fastreg)"?
Anna
> + }
> }
>
> static int
> @@ -1480,6 +1486,24 @@ rpcrdma_unmap_one(struct rpcrdma_ia *ia, struct rpcrdma_mr_seg *seg)
> seg->mr_dma, seg->mr_dmalen, seg->mr_dir);
> }
>
> +static void
> +rpcrdma_increment_frmr_rkey(struct rpcrdma_mw *mw)
> +{
> + struct ib_mr *frmr = mw->r.frmr.fr_mr;
> + u8 key = frmr->rkey & 0x000000FF;
> +
> + ib_update_fast_reg_key(frmr, ++key);
> +}
> +
> +static void
> +rpcrdma_decrement_frmr_rkey(struct rpcrdma_mw *mw)
> +{
> + struct ib_mr *frmr = mw->r.frmr.fr_mr;
> + u8 key = frmr->rkey & 0x000000FF;
> +
> + ib_update_fast_reg_key(frmr, --key);
> +}
> +
> static int
> rpcrdma_register_frmr_external(struct rpcrdma_mr_seg *seg,
> int *nsegs, int writing, struct rpcrdma_ia *ia,
> @@ -1487,8 +1511,6 @@ rpcrdma_register_frmr_external(struct rpcrdma_mr_seg *seg,
> {
> struct rpcrdma_mr_seg *seg1 = seg;
> struct ib_send_wr invalidate_wr, frmr_wr, *bad_wr, *post_wr;
> -
> - u8 key;
> int len, pageoff;
> int i, rc;
> int seg_len;
> @@ -1552,14 +1574,10 @@ rpcrdma_register_frmr_external(struct rpcrdma_mr_seg *seg,
> rc = -EIO;
> goto out_err;
> }
> -
> - /* Bump the key */
> - key = (u8)(seg1->mr_chunk.rl_mw->r.frmr.fr_mr->rkey & 0x000000FF);
> - ib_update_fast_reg_key(seg1->mr_chunk.rl_mw->r.frmr.fr_mr, ++key);
> -
> frmr_wr.wr.fast_reg.access_flags = (writing ?
> IB_ACCESS_REMOTE_WRITE | IB_ACCESS_LOCAL_WRITE :
> IB_ACCESS_REMOTE_READ);
> + rpcrdma_increment_frmr_rkey(seg1->mr_chunk.rl_mw);
> frmr_wr.wr.fast_reg.rkey = seg1->mr_chunk.rl_mw->r.frmr.fr_mr->rkey;
> DECR_CQCOUNT(&r_xprt->rx_ep);
>
> @@ -1568,6 +1586,7 @@ rpcrdma_register_frmr_external(struct rpcrdma_mr_seg *seg,
> if (rc) {
> dprintk("RPC: %s: failed ib_post_send for register,"
> " status %i\n", __func__, rc);
> + rpcrdma_decrement_frmr_rkey(seg1->mr_chunk.rl_mw);
> goto out_err;
> } else {
> seg1->mr_rkey = seg1->mr_chunk.rl_mw->r.frmr.fr_mr->rkey;
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-nfs" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-06-24 15:47 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-23 22:39 [PATCH v1 00/13] NFS/RDMA patches for 3.17 Chuck Lever
2014-06-23 22:39 ` [PATCH v1 01/13] xprtrdma: Fix panic in rpcrdma_register_frmr_external() Chuck Lever
2014-06-24 14:37 ` Or Gerlitz
2014-06-23 22:39 ` [PATCH v1 02/13] xprtrdma: Protect ->qp during FRMR deregistration Chuck Lever
2014-06-23 22:39 ` [PATCH v1 03/13] xprtrdma: Limit data payload size for ALLPHYSICAL Chuck Lever
2014-06-23 22:39 ` [PATCH v1 04/13] xprtrdma: Update rkeys after transport reconnect Chuck Lever
2014-06-23 22:39 ` [PATCH v1 05/13] xprtrdma: Don't drain CQs on transport disconnect Chuck Lever
2014-07-02 19:06 ` Devesh Sharma
2014-07-02 19:28 ` Steve Wise
2014-07-02 19:40 ` Chuck Lever
2014-07-02 19:46 ` Steve Wise
2014-07-02 19:48 ` Devesh Sharma
2014-07-02 19:59 ` Chuck Lever
2014-07-03 5:33 ` Devesh Sharma
2014-07-02 19:42 ` Devesh Sharma
2014-07-02 19:50 ` Steve Wise
2014-07-02 19:53 ` Devesh Sharma
2014-07-02 19:56 ` Steve Wise
2014-07-02 19:57 ` Devesh Sharma
2014-07-02 19:56 ` Devesh Sharma
2014-06-23 22:39 ` [PATCH v1 06/13] xprtrdma: Unclutter struct rpcrdma_mr_seg Chuck Lever
2014-06-23 22:39 ` [PATCH v1 07/13] xprtrdma: Encode Work Request opcode in wc->wr_id Chuck Lever
2014-06-23 22:40 ` [PATCH v1 08/13] xprtrdma: Back off rkey when FAST_REG_MR fails Chuck Lever
2014-06-24 15:47 ` Anna Schumaker [this message]
2014-06-24 16:26 ` Chuck Lever
2014-06-23 22:40 ` [PATCH v1 09/13] xprtrdma: Refactor rpcrdma_buffer_put() Chuck Lever
2014-06-23 22:40 ` [PATCH v1 10/13] xprtrdma: Release FRMR segment buffers during LOCAL_INV completion Chuck Lever
2014-06-25 5:17 ` Shirley Ma
2014-06-25 14:32 ` Chuck Lever
2014-06-25 16:14 ` Shirley Ma
2014-06-23 22:40 ` [PATCH v1 11/13] xprtrdma: Clean up rpcrdma_ep_disconnect() Chuck Lever
2014-06-23 22:40 ` [PATCH v1 12/13] xprtrdma: Remove RPCRDMA_PERSISTENT_REGISTRATION macro Chuck Lever
2014-06-23 22:40 ` [PATCH v1 13/13] xprtrdma: Handle additional connection events Chuck Lever
2014-06-24 15:58 ` Anna Schumaker
2014-06-24 14:35 ` [PATCH v1 00/13] NFS/RDMA patches for 3.17 Or Gerlitz
2014-06-24 17:07 ` Chuck Lever
2014-06-25 22:47 ` Steve Wise
2014-06-27 16:17 ` Shirley Ma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53A99DA6.90808@gmail.com \
--to=schumaker.anna@gmail.com \
--cc=chuck.lever@oracle.com \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox