From: Chuck Lever <chuck.lever@oracle.com>
To: linux-rdma@vger.kernel.org, linux-nfs@vger.kernel.org
Subject: [PATCH v2 04/11] xprtrdma: Move struct ib_send_wr off the stack
Date: Mon, 30 Nov 2015 17:14:30 -0500 [thread overview]
Message-ID: <20151130221430.12235.67037.stgit@manet.1015granger.net> (raw)
In-Reply-To: <20151130221349.12235.29565.stgit@manet.1015granger.net>
For FRWR FASTREG and LOCAL_INV, move the ib_*_wr structure off
the stack. This allows frwr_op_map and frwr_op_unmap to chain
WRs together without limit to register or invalidate a set of MRs
with a single ib_post_send().
(This will be for chaining LOCAL_INV requests).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
---
net/sunrpc/xprtrdma/frwr_ops.c | 38 ++++++++++++++++++++------------------
net/sunrpc/xprtrdma/xprt_rdma.h | 2 ++
2 files changed, 22 insertions(+), 18 deletions(-)
diff --git a/net/sunrpc/xprtrdma/frwr_ops.c b/net/sunrpc/xprtrdma/frwr_ops.c
index 88cf9e7..31a4578 100644
--- a/net/sunrpc/xprtrdma/frwr_ops.c
+++ b/net/sunrpc/xprtrdma/frwr_ops.c
@@ -319,7 +319,7 @@ frwr_op_map(struct rpcrdma_xprt *r_xprt, struct rpcrdma_mr_seg *seg,
struct rpcrdma_mw *mw;
struct rpcrdma_frmr *frmr;
struct ib_mr *mr;
- struct ib_reg_wr reg_wr;
+ struct ib_reg_wr *reg_wr;
struct ib_send_wr *bad_wr;
int rc, i, n, dma_nents;
u8 key;
@@ -336,6 +336,7 @@ frwr_op_map(struct rpcrdma_xprt *r_xprt, struct rpcrdma_mr_seg *seg,
frmr = &mw->r.frmr;
frmr->fr_state = FRMR_IS_VALID;
mr = frmr->fr_mr;
+ reg_wr = &frmr->fr_regwr;
if (nsegs > ia->ri_max_frmr_depth)
nsegs = ia->ri_max_frmr_depth;
@@ -381,19 +382,19 @@ frwr_op_map(struct rpcrdma_xprt *r_xprt, struct rpcrdma_mr_seg *seg,
key = (u8)(mr->rkey & 0x000000FF);
ib_update_fast_reg_key(mr, ++key);
- reg_wr.wr.next = NULL;
- reg_wr.wr.opcode = IB_WR_REG_MR;
- reg_wr.wr.wr_id = (uintptr_t)mw;
- reg_wr.wr.num_sge = 0;
- reg_wr.wr.send_flags = 0;
- reg_wr.mr = mr;
- reg_wr.key = mr->rkey;
- reg_wr.access = writing ?
- IB_ACCESS_REMOTE_WRITE | IB_ACCESS_LOCAL_WRITE :
- IB_ACCESS_REMOTE_READ;
+ reg_wr->wr.next = NULL;
+ reg_wr->wr.opcode = IB_WR_REG_MR;
+ reg_wr->wr.wr_id = (uintptr_t)mw;
+ reg_wr->wr.num_sge = 0;
+ reg_wr->wr.send_flags = 0;
+ reg_wr->mr = mr;
+ reg_wr->key = mr->rkey;
+ reg_wr->access = writing ?
+ IB_ACCESS_REMOTE_WRITE | IB_ACCESS_LOCAL_WRITE :
+ IB_ACCESS_REMOTE_READ;
DECR_CQCOUNT(&r_xprt->rx_ep);
- rc = ib_post_send(ia->ri_id->qp, ®_wr.wr, &bad_wr);
+ rc = ib_post_send(ia->ri_id->qp, ®_wr->wr, &bad_wr);
if (rc)
goto out_senderr;
@@ -423,23 +424,24 @@ frwr_op_unmap(struct rpcrdma_xprt *r_xprt, struct rpcrdma_mr_seg *seg)
struct rpcrdma_ia *ia = &r_xprt->rx_ia;
struct rpcrdma_mw *mw = seg1->rl_mw;
struct rpcrdma_frmr *frmr = &mw->r.frmr;
- struct ib_send_wr invalidate_wr, *bad_wr;
+ struct ib_send_wr *invalidate_wr, *bad_wr;
int rc, nsegs = seg->mr_nsegs;
dprintk("RPC: %s: FRMR %p\n", __func__, mw);
seg1->rl_mw = NULL;
frmr->fr_state = FRMR_IS_INVALID;
+ invalidate_wr = &mw->r.frmr.fr_invwr;
- memset(&invalidate_wr, 0, sizeof(invalidate_wr));
- invalidate_wr.wr_id = (unsigned long)(void *)mw;
- invalidate_wr.opcode = IB_WR_LOCAL_INV;
- invalidate_wr.ex.invalidate_rkey = frmr->fr_mr->rkey;
+ memset(invalidate_wr, 0, sizeof(*invalidate_wr));
+ invalidate_wr->wr_id = (uintptr_t)mw;
+ invalidate_wr->opcode = IB_WR_LOCAL_INV;
+ invalidate_wr->ex.invalidate_rkey = frmr->fr_mr->rkey;
DECR_CQCOUNT(&r_xprt->rx_ep);
ib_dma_unmap_sg(ia->ri_device, frmr->sg, frmr->sg_nents, seg1->mr_dir);
read_lock(&ia->ri_qplock);
- rc = ib_post_send(ia->ri_id->qp, &invalidate_wr, &bad_wr);
+ rc = ib_post_send(ia->ri_id->qp, invalidate_wr, &bad_wr);
read_unlock(&ia->ri_qplock);
if (rc)
goto out_err;
diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h
index ac7f8d4..ca481b2 100644
--- a/net/sunrpc/xprtrdma/xprt_rdma.h
+++ b/net/sunrpc/xprtrdma/xprt_rdma.h
@@ -207,6 +207,8 @@ struct rpcrdma_frmr {
enum rpcrdma_frmr_state fr_state;
struct work_struct fr_work;
struct rpcrdma_xprt *fr_xprt;
+ struct ib_reg_wr fr_regwr;
+ struct ib_send_wr fr_invwr;
};
struct rpcrdma_fmr {
next prev parent reply other threads:[~2015-11-30 22:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-30 22:13 [PATCH v2 00/11] NFS/RDMA client patches for 4.5 Chuck Lever
2015-11-30 22:14 ` [PATCH v2 01/11] xprtrdma: Fix additional uses of spin_lock_irqsave(rb_lock) Chuck Lever
2015-11-30 22:14 ` [PATCH v2 02/11] xprtrdma: xprt_rdma_free() must not release backchannel reqs Chuck Lever
2015-11-30 22:14 ` [PATCH v2 03/11] xprtrdma: Disable RPC/RDMA backchannel debugging messages Chuck Lever
2015-11-30 22:14 ` Chuck Lever [this message]
2015-11-30 22:14 ` [PATCH v2 05/11] xprtrdma: Introduce ro_unmap_sync method Chuck Lever
2015-11-30 22:14 ` [PATCH v2 06/11] xprtrdma: Add ro_unmap_sync method for FRWR Chuck Lever
2015-11-30 22:14 ` [PATCH v2 07/11] xprtrdma: Add ro_unmap_sync method for FMR Chuck Lever
2015-11-30 22:15 ` [PATCH v2 08/11] xprtrdma: Add ro_unmap_sync method for all-physical registration Chuck Lever
2015-11-30 22:15 ` [PATCH v2 09/11] SUNRPC: Introduce xprt_commit_rqst() Chuck Lever
2015-11-30 22:15 ` [PATCH v2 10/11] xprtrdma: Invalidate in the RPC reply handler Chuck Lever
2015-11-30 22:15 ` [PATCH v2 11/11] xprtrdma: Revert commit e7104a2a9606 ('xprtrdma: Cap req_cqinit') Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151130221430.12235.67037.stgit@manet.1015granger.net \
--to=chuck.lever@oracle.com \
--cc=linux-nfs@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox