From: NeilBrown <neilb@suse.de>
To: Chuck Lever <chuck.lever@oracle.com>, Jeff Layton <jlayton@kernel.org>
Cc: linux-nfs@vger.kernel.org,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <Dai.Ngo@oracle.com>, Tom Talpey <tom@talpey.com>,
Dave Chinner <david@fromorbit.com>
Subject: [PATCH 6/6] nfsd: filecache: drop the list_lru lock during lock gc scans
Date: Fri, 7 Feb 2025 16:15:16 +1100 [thread overview]
Message-ID: <20250207051701.3467505-7-neilb@suse.de> (raw)
In-Reply-To: <20250207051701.3467505-1-neilb@suse.de>
Under a high NFSv3 load with lots of different files being accessed,
the LRU list of garbage-collectable files can become quite long.
Asking list_lru_scan_node() to scan the whole list can result in a long
period during which a spinlock is held, blocking the addition of new LRU
items.
So ask list_lru_scan_node() to scan only a few entries at a time, and
repeat until the scan is complete.
If the shrinker runs between two consecutive calls of
list_lru_scan_node() it could invalidate the "remaining" counter which
could lead to premature freeing. So add a spinlock to avoid that.
Signed-off-by: NeilBrown <neilb@suse.de>
---
fs/nfsd/filecache.c | 27 ++++++++++++++++++++++++---
fs/nfsd/filecache.h | 6 ++++++
2 files changed, 30 insertions(+), 3 deletions(-)
diff --git a/fs/nfsd/filecache.c b/fs/nfsd/filecache.c
index d1ce0bc86ff7..54df5e23f119 100644
--- a/fs/nfsd/filecache.c
+++ b/fs/nfsd/filecache.c
@@ -533,6 +533,13 @@ nfsd_file_gc_cb(struct list_head *item, struct list_lru_one *lru,
return nfsd_file_lru_cb(item, lru, arg);
}
+/* If the shrinker runs between calls to list_lru_walk_node() in
+ * nfsd_file_gc(), the "remaining" count will be wrong. This could
+ * result in premature freeing of some files. This may not matter much
+ * but is easy to fix with this spinlock which temporarily disables
+ * the shrinker.
+ */
+static DEFINE_SPINLOCK(nfsd_gc_lock);
static void
nfsd_file_gc(void)
{
@@ -540,11 +547,21 @@ nfsd_file_gc(void)
unsigned long ret = 0;
int nid;
+ spin_lock(&nfsd_gc_lock);
for_each_node_state(nid, N_NORMAL_MEMORY) {
- unsigned long nr = list_lru_count_node(&nfsd_file_lru, nid);
- ret += list_lru_walk_node(&nfsd_file_lru, nid, nfsd_file_gc_cb,
- &dispose, &nr);
+ unsigned long remaining = list_lru_count_node(&nfsd_file_lru, nid);
+
+ while (remaining > 0) {
+ unsigned long nr = min(remaining, NFSD_FILE_GC_BATCH);
+ remaining -= nr;
+ ret += list_lru_walk_node(&nfsd_file_lru, nid, nfsd_file_gc_cb,
+ &dispose, &nr);
+ if (nr)
+ /* walk aborted early */
+ remaining = 0;
+ }
}
+ spin_unlock(&nfsd_gc_lock);
trace_nfsd_file_gc_removed(ret, list_lru_count(&nfsd_file_lru));
nfsd_file_dispose_list_delayed(&dispose);
}
@@ -569,8 +586,12 @@ nfsd_file_lru_scan(struct shrinker *s, struct shrink_control *sc)
LIST_HEAD(dispose);
unsigned long ret;
+ if (!spin_trylock(&nfsd_gc_lock))
+ return SHRINK_STOP;
+
ret = list_lru_shrink_walk(&nfsd_file_lru, sc,
nfsd_file_lru_cb, &dispose);
+ spin_unlock(&nfsd_gc_lock);
trace_nfsd_file_shrinker_removed(ret, list_lru_count(&nfsd_file_lru));
nfsd_file_dispose_list_delayed(&dispose);
return ret;
diff --git a/fs/nfsd/filecache.h b/fs/nfsd/filecache.h
index de5b8aa7fcb0..5865f9c72712 100644
--- a/fs/nfsd/filecache.h
+++ b/fs/nfsd/filecache.h
@@ -3,6 +3,12 @@
#include <linux/fsnotify_backend.h>
+/*
+ * Limit the time that the list_lru_one lock is held during
+ * an LRU scan.
+ */
+#define NFSD_FILE_GC_BATCH (16UL)
+
/*
* This is the fsnotify_mark container that nfsd attaches to the files that it
* is holding open. Note that we have a separate refcount here aside from the
--
2.47.1
prev parent reply other threads:[~2025-02-07 5:17 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-07 5:15 [PATCH 0/6] nfsd: filecache: various fixes NeilBrown
2025-02-07 5:15 ` [PATCH 1/6] nfsd: filecache: remove race handling NeilBrown
2025-02-10 23:33 ` Dave Chinner
2025-02-12 22:16 ` NeilBrown
2025-02-13 15:02 ` Chuck Lever
2025-02-07 5:15 ` [PATCH 2/6] nfsd: filecache: use nfsd_file_dispose_list() in nfsd_file_close_inode_sync() NeilBrown
2025-02-07 5:15 ` [PATCH 3/6] nfsd: filecache: use list_lru_walk_node() in nfsd_file_gc() NeilBrown
2025-02-07 14:43 ` Chuck Lever
2025-02-09 23:16 ` NeilBrown
2025-02-10 13:46 ` Jeff Layton
2025-02-07 5:15 ` [PATCH 4/6] nfsd: filecache: introduce NFSD_FILE_RECENT NeilBrown
2025-02-07 14:52 ` Chuck Lever
2025-02-09 23:23 ` NeilBrown
2025-02-10 0:50 ` Chuck Lever
2025-02-10 2:31 ` NeilBrown
2025-02-10 14:25 ` Jeff Layton
2025-02-12 22:39 ` NeilBrown
2025-02-13 0:08 ` Chuck Lever
2025-02-13 11:27 ` Jeff Layton
2025-02-10 14:26 ` Chuck Lever
2025-02-10 14:01 ` Jeff Layton
2025-02-10 23:57 ` Dave Chinner
2025-02-11 11:38 ` Jeff Layton
2025-02-07 5:15 ` [PATCH 5/6] nfsd: filecache: don't repeatedly add/remove files on the lru list NeilBrown
2025-02-07 5:15 ` NeilBrown [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250207051701.3467505-7-neilb@suse.de \
--to=neilb@suse.de \
--cc=Dai.Ngo@oracle.com \
--cc=chuck.lever@oracle.com \
--cc=david@fromorbit.com \
--cc=jlayton@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox