From: Mike Snitzer <snitzer@kernel.org>
To: Chuck Lever <chuck.lever@oracle.com>, Jeff Layton <jlayton@kernel.org>
Cc: linux-nfs@vger.kernel.org, linux-fsdevel@vger.kernel.org,
Jens Axboe <axboe@kernel.dk>
Subject: [PATCH 5/6] NFSD: leverage DIO alignment to selectively issue O_DIRECT reads and writes
Date: Tue, 10 Jun 2025 16:57:36 -0400 [thread overview]
Message-ID: <20250610205737.63343-6-snitzer@kernel.org> (raw)
In-Reply-To: <20250610205737.63343-1-snitzer@kernel.org>
IO must be aligned, otherwise it falls back to using buffered IO.
RWF_DONTCACHE is _not_ currently used for misaligned IO (even when
nfsd/enable-dontcache=1) because it works against us (due to RMW
needing to read without benefit of cache), whereas buffered IO enables
misaligned IO to be more performant.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
---
fs/nfsd/vfs.c | 40 ++++++++++++++++++++++++++++++++++++----
1 file changed, 36 insertions(+), 4 deletions(-)
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index e7cc8c6dfbad..a942609e3ab9 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1064,6 +1064,22 @@ __be32 nfsd_splice_read(struct svc_rqst *rqstp, struct svc_fh *fhp,
return nfsd_finish_read(rqstp, fhp, file, offset, count, eof, host_err);
}
+static bool is_dio_aligned(const struct iov_iter *iter, loff_t offset,
+ const u32 blocksize)
+{
+ u32 blocksize_mask;
+
+ if (!blocksize)
+ return false;
+
+ blocksize_mask = blocksize - 1;
+ if ((offset & blocksize_mask) ||
+ (iov_iter_alignment(iter) & blocksize_mask))
+ return false;
+
+ return true;
+}
+
/**
* nfsd_iter_read - Perform a VFS read using an iterator
* @rqstp: RPC transaction context
@@ -1107,8 +1123,16 @@ __be32 nfsd_iter_read(struct svc_rqst *rqstp, struct svc_fh *fhp,
trace_nfsd_read_vector(rqstp, fhp, offset, *count);
iov_iter_bvec(&iter, ITER_DEST, rqstp->rq_bvec, v, *count);
- if (nfsd_enable_dontcache)
- flags |= RWF_DONTCACHE;
+ if (nfsd_enable_dontcache) {
+ if (is_dio_aligned(&iter, offset, nf->nf_dio_read_offset_align))
+ flags |= RWF_DIRECT;
+ /* FIXME: not using RWF_DONTCACHE for misaligned IO because it works
+ * against us (due to RMW needing to read without benefit of cache),
+ * whereas buffered IO enables misaligned IO to be more performant.
+ */
+ //else
+ // flags |= RWF_DONTCACHE;
+ }
host_err = vfs_iter_read(file, &iter, &ppos, flags);
return nfsd_finish_read(rqstp, fhp, file, offset, count, eof, host_err);
@@ -1217,8 +1241,16 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp,
nvecs = xdr_buf_to_bvec(rqstp->rq_bvec, rqstp->rq_maxpages, payload);
iov_iter_bvec(&iter, ITER_SOURCE, rqstp->rq_bvec, nvecs, *cnt);
- if (nfsd_enable_dontcache)
- flags |= RWF_DONTCACHE;
+ if (nfsd_enable_dontcache) {
+ if (is_dio_aligned(&iter, offset, nf->nf_dio_offset_align))
+ flags |= RWF_DIRECT;
+ /* FIXME: not using RWF_DONTCACHE for misaligned IO because it works
+ * against us (due to RMW needing to read without benefit of cache),
+ * whereas buffered IO enables misaligned IO to be more performant.
+ */
+ //else
+ // flags |= RWF_DONTCACHE;
+ }
since = READ_ONCE(file->f_wb_err);
if (verf)
--
2.44.0
next prev parent reply other threads:[~2025-06-10 20:57 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-10 20:57 [PATCH 0/6] NFSD: add enable-dontcache and initially use it to add DIO support Mike Snitzer
2025-06-10 20:57 ` [PATCH 1/6] NFSD: add the ability to enable use of RWF_DONTCACHE for all IO Mike Snitzer
2025-06-11 6:57 ` Christoph Hellwig
2025-06-11 10:44 ` Mike Snitzer
2025-06-11 13:04 ` Jeff Layton
2025-06-11 13:56 ` Chuck Lever
2025-06-11 14:31 ` Chuck Lever
2025-06-11 19:18 ` Mike Snitzer
2025-06-11 20:29 ` Jeff Layton
2025-06-11 21:36 ` need SUNRPC TCP to receive into aligned pages [was: Re: [PATCH 1/6] NFSD: add the ability to enable use of RWF_DONTCACHE for all IO] Mike Snitzer
2025-06-12 10:28 ` Jeff Layton
2025-06-12 11:28 ` Jeff Layton
2025-06-12 13:28 ` Chuck Lever
2025-06-12 14:17 ` Benjamin Coddington
2025-06-12 15:56 ` Mike Snitzer
2025-06-12 15:58 ` Chuck Lever
2025-06-12 16:12 ` Mike Snitzer
2025-06-12 16:32 ` Chuck Lever
2025-06-13 5:39 ` Christoph Hellwig
2025-06-12 16:22 ` Jeff Layton
2025-06-13 5:46 ` Christoph Hellwig
2025-06-13 9:23 ` Mike Snitzer
2025-06-13 13:02 ` Jeff Layton
2025-06-16 12:35 ` Christoph Hellwig
2025-06-16 12:29 ` Christoph Hellwig
2025-06-16 16:07 ` Mike Snitzer
2025-06-17 4:37 ` Christoph Hellwig
2025-06-17 20:26 ` Mike Snitzer
2025-06-17 22:23 ` [RFC PATCH] lib/iov_iter: remove piecewise bvec length checking in iov_iter_aligned_bvec [was: Re: need SUNRPC TCP to receive into aligned pages] Mike Snitzer
2025-07-03 0:12 ` need SUNRPC TCP to receive into aligned pages [was: Re: [PATCH 1/6] NFSD: add the ability to enable use of RWF_DONTCACHE for all IO] NeilBrown
2025-06-12 7:13 ` [PATCH 1/6] NFSD: add the ability to enable use of RWF_DONTCACHE for all IO Christoph Hellwig
2025-06-12 13:15 ` Chuck Lever
2025-06-12 13:21 ` Chuck Lever
2025-06-12 16:00 ` Mike Snitzer
2025-06-16 13:32 ` Chuck Lever
2025-06-16 16:10 ` Mike Snitzer
2025-06-17 17:22 ` Mike Snitzer
2025-06-17 17:31 ` Chuck Lever
2025-06-19 20:19 ` Mike Snitzer
2025-06-30 14:50 ` Chuck Lever
2025-07-04 19:46 ` Mike Snitzer
2025-07-04 19:49 ` Chuck Lever
2025-06-10 20:57 ` [PATCH 2/6] NFSD: filecache: add STATX_DIOALIGN and STATX_DIO_READ_ALIGN support Mike Snitzer
2025-06-10 20:57 ` [PATCH 3/6] NFSD: pass nfsd_file to nfsd_iter_read() Mike Snitzer
2025-06-10 20:57 ` [PATCH 4/6] fs: introduce RWF_DIRECT to allow using O_DIRECT on a per-IO basis Mike Snitzer
2025-06-11 6:58 ` Christoph Hellwig
2025-06-11 10:51 ` Mike Snitzer
2025-06-11 14:17 ` Chuck Lever
2025-06-12 7:15 ` Christoph Hellwig
2025-06-10 20:57 ` Mike Snitzer [this message]
2025-06-11 7:00 ` [PATCH 5/6] NFSD: leverage DIO alignment to selectively issue O_DIRECT reads and writes Christoph Hellwig
2025-06-11 12:23 ` Mike Snitzer
2025-06-11 13:30 ` Jeff Layton
2025-06-12 7:22 ` Christoph Hellwig
2025-06-12 7:23 ` Christoph Hellwig
2025-06-11 14:42 ` Chuck Lever
2025-06-11 15:07 ` Jeff Layton
2025-06-11 15:11 ` Chuck Lever
2025-06-11 15:44 ` Jeff Layton
2025-06-11 20:51 ` Mike Snitzer
2025-06-12 7:32 ` Christoph Hellwig
2025-06-12 7:28 ` Christoph Hellwig
2025-06-12 7:25 ` Christoph Hellwig
2025-06-10 20:57 ` [PATCH 6/6] NFSD: issue READs using O_DIRECT even if IO is misaligned Mike Snitzer
2025-06-11 12:55 ` [PATCH 0/6] NFSD: add enable-dontcache and initially use it to add DIO support Jeff Layton
2025-06-12 7:39 ` Christoph Hellwig
2025-06-12 20:37 ` Mike Snitzer
2025-06-13 5:31 ` Christoph Hellwig
2025-06-11 14:16 ` Chuck Lever
2025-06-11 18:02 ` Mike Snitzer
2025-06-11 19:06 ` Chuck Lever
2025-06-11 19:58 ` Mike Snitzer
2025-06-12 13:46 ` Chuck Lever
2025-06-12 19:08 ` Mike Snitzer
2025-06-12 20:17 ` Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250610205737.63343-6-snitzer@kernel.org \
--to=snitzer@kernel.org \
--cc=axboe@kernel.dk \
--cc=chuck.lever@oracle.com \
--cc=jlayton@kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-nfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox