From: Benny Halevy <bhalevy@panasas.com>
To: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: pnfs@linux-nfs.org, linux-nfs@vger.kernel.org
Subject: Re: [PATCH 1/1 v2] nfs41: pass state recovery error back to caller
Date: Thu, 03 Sep 2009 00:04:38 +0300 [thread overview]
Message-ID: <4A9EDDE6.1090308@panasas.com> (raw)
In-Reply-To: <1251918574.26601.48.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
On Sep. 02, 2009, 22:09 +0300, Trond Myklebust <Trond.Myklebust@netapp.com> wrote:
> On Wed, 2009-09-02 at 21:06 +0300, Benny Halevy wrote:
>> On Sep. 02, 2009, 20:52 +0300, Trond Myklebust <Trond.Myklebust@netapp.com> wrote:
>>> On Wed, 2009-09-02 at 10:48 +0300, Benny Halevy wrote:
>>>> Currently the error returned from create_session
>>>> is ignored by nfs4_check_client_ready and mis-translated to
>>>> -EPROTONOSUPPORT if the client has a session.
>>>> Record the error returned from create_session to the state manager
>>>> in cl_cons_state via nfs_mark_client_ready and pass it upstream
>>>> in nfs4_recover_expired_lease.
>>>>
>>>> Signed-off-by: Benny Halevy <bhalevy@panasas.com>
>>>> ---
>>> Firstly, if you're out to save 4 bytes by sharing storage with an object
>>> of an entirely different type, then please use an explicit union. Then
>>> use a special state NFS4CLNT_LEASE_RECLAIM_FAILED in order to clearly
>>> label what is being stored in that union.
>>>
>> OK. Just to make sure, will it be acceptable by you to add a field
>> to struct nfs_client to explicitly keep this status or would you prefer to
>> save these 4 bytes using the union and extra state?
>
> For one thing, I'd like to know why we need to pass these errors up the
> stack. Normally, the state manager is supposed to be able to handle all
> recovery issues.
>
The error case I'd like to fix is that of the server returning an error
on OP_PUROOTFH.
In the nfsv4 case we get the error correctly on this path:
nfs4_create_server
nfs4_path_walk
nfs4_get_root: getroot error = 2
The error in this case is returned via the regular rpc path
and the state engine is not really involved.
However, in the nfsv4.1 case, the failure is different:
nfs4_create_server()
nfs4_init_session()
nfs4_recover_expired_lease()
nfs4_schedule_state_recovery()
# and the failure happens within the state engine
nfs4_proc_create_session()
nfs4_proc_get_lease_time() return -2
So, the reason I wanted to pass the status out of the
state engine is to return it from nfs4_recover_expired_lease
to nfs4_init_session and back to nfs4_create_server.
It might be possible to avoid this if we separate out
the lease time initialization
>>> Secondly, I'd say that it is more natural to share storage with the
>>> client id, cl_ex_clid, rather than using the lease time. The latter is
>>> read via an entirely separate RPC call _after_ you are done establishing
>>> the lease and the first session.
>>>
>> I (ab?)used cl_lease_time for this reason as nobody cares about its
>> value at the session establishment phase.
>
> Are you able to guarantee that no other threads can race with the lease
> time RPC call?
>
Hmm, good point.
If another thread runs the state manager on the same struct nfs_client
it might clear clp->cl_lease_time, but it does that after
atomically clearing NFS4CLNT_LEASE_EXPIRED in clp->cl_state.
Reversing the order and checking for a negative cl_lease_time
would have done a safer job (though not absolutely thread safe
and presuming cl_lease_time cannot normally be negative)...
ret = clp->cl_lease_time;
if (ret < 0 &&
test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state))
break;
Benny
next prev parent reply other threads:[~2009-09-02 21:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-02 7:48 [PATCH 1/1 v2] nfs41: pass state recovery error back to caller Benny Halevy
2009-09-02 17:52 ` Trond Myklebust
[not found] ` <1251913960.26601.41.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2009-09-02 18:06 ` Benny Halevy
2009-09-02 19:09 ` Trond Myklebust
[not found] ` <1251918574.26601.48.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2009-09-02 21:04 ` Benny Halevy [this message]
2009-09-03 15:15 ` [RFC 1/1] nfs4: optionally return status from state_manager Benny Halevy
2009-09-25 4:30 ` Ping: [pnfs] " Benny Halevy
2009-09-25 13:29 ` Trond Myklebust
[not found] ` <1253885382.31072.14.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2009-09-25 13:53 ` Benny Halevy
2009-09-25 14:10 ` J. Bruce Fields
2009-09-25 14:17 ` Benny Halevy
2009-09-25 14:13 ` Trond Myklebust
[not found] ` <1253888019.31072.31.camel-rJ7iovZKK19ZJLDQqaL3InhyD016LWXt@public.gmane.org>
2009-09-25 14:19 ` Benny Halevy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A9EDDE6.1090308@panasas.com \
--to=bhalevy@panasas.com \
--cc=Trond.Myklebust@netapp.com \
--cc=linux-nfs@vger.kernel.org \
--cc=pnfs@linux-nfs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox