From: Trond Myklebust <trond.myklebust@primarydata.com>
To: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: linuxnfs <linux-nfs@vger.kernel.org>,
Christoph Hellwig <hch@lst.de>,
Viro Alexander <viro@zeniv.linux.org.uk>,
linux-arm-kernel@lists.infradead.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: NFS client broken in Linus' tip
Date: Thu, 30 Jan 2014 09:17:00 -0500 [thread overview]
Message-ID: <960A8F94-BDD4-4ED0-95EC-0D71D4AC27E7@primarydata.com> (raw)
In-Reply-To: <20140130140834.GW15937@n2100.arm.linux.org.uk>
On Jan 30, 2014, at 9:08, Russell King - ARM Linux <linux@arm.linux.org.uk> wrote:
> I just booted Linus' tip (plus a few other patches to imx-drm and imx
> code), and stumbled into this interesting scenario:
>
> # touch test
> touch: cannot touch `test': Operation not supported
>
> I also tried mkdir and mknod, all result in the same error. Hard and
> symlinks links are creatable.
>
> However, I can chmod existing files and rename them. Files can also be
> deleted, and the combination of this has left me without a /etc/mtab !
>
> The machine is a iMX6 based ARM, running root-nfs, which was mounted via
> ubuntu's initramfs (so not using the kernel's built-in root-nfs.)
>
> /proc/mounts for the root mount gives:
> 192.168.1.123:/var/boot/ci / nfs rw,relatime,vers=3,rsize=65536,wsize=65536,namlen=255,hard,nolock,proto=tcp,port=2049,timeo=7,retrans=10,sec=sys,local_lock=all,addr=192.168.1.123 0 0
>
> CONFIG_NFS_FS=y
> CONFIG_NFS_V2=y
> CONFIG_NFS_V3=y
> CONFIG_NFS_V3_ACL=y
> CONFIG_NFS_V4=y
> # CONFIG_NFS_SWAP is not set
> # CONFIG_NFS_V4_1 is not set
> CONFIG_ROOT_NFS=y
> # CONFIG_NFS_USE_LEGACY_DNS is not set
> CONFIG_NFS_USE_KERNEL_DNS=y
> # CONFIG_NFSD is not set
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_NFS_ACL_SUPPORT=y
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=y
> CONFIG_SUNRPC_GSS=y
>
> tcpdumping, I see:
>
> 13:59:51.713523 IP 192.168.1.252.1341245608 > 192.168.1.123.2049: 132 lookup fh Unknown/010007011040840000000000CC238FC8FBA0475D9D9F8356B4C44166CDC38700 "test"
> 13:59:51.714345 IP 192.168.1.123.2049 > 192.168.1.252.1341245608: reply ok 120 lookup ERROR: No such file or directory
> 13:59:51.751303 IP 192.168.1.252.797 > 192.168.1.123.nfs: . ack 3381 win 2625 <nop,nop,timestamp 474136 3431312924>
>
> which is the only NFS packet(s) I see which mention "test".
>
> and stracing touch:
>
> open("test", O_WRONLY|O_CREAT|O_NOCTTY|O_NONBLOCK|O_LARGEFILE, 0666) = -1 EOPNOTSUPP (Operation not supported)
> utimensat(AT_FDCWD, "test", NULL, 0) = -1 ENOENT (No such file or directory)
> write(2, "touch: ", 7touch: ) = 7
> write(2, "cannot touch `test'", 19cannot touch `test') = 19
> write(2, ": Operation not supported", 25: Operation not supported) = 25
> write(2, "\n", 1
> ) = 1
>
> I think it's down to this:
>
> commit 013cdf1088d7235da9477a2375654921d9b9ba9f
> Author: Christoph Hellwig <hch@infradead.org>
> Date: Fri Dec 20 05:16:53 2013 -0800
>
> nfs: use generic posix ACL infrastructure for v3 Posix ACLs
>
> This causes a small behaviour change in that we don't bother to set
> ACLs on file creation if the mode bit can express the access permissions
> fully, and thus behaving identical to local filesystems.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
>
> which adds:
>
> + status = posix_acl_create(dir, &sattr->ia_mode, &default_acl, &acl);
> + if (status)
> + goto out;
Right, this should clearly not cause nfs4_proc_create to fail if it returns EOPNOTSUPP.
> into nfs3_proc_create(), but this ends up calling down into nfs3_get_acl(),
> which does this:
>
> if (!nfs_server_capable(inode, NFS_CAP_ACLS))
> return ERR_PTR(-EOPNOTSUPP);
Just for completeness sake: is the server you were running against supposed to support POSIX acls?
--
Trond Myklebust
Linux NFS client maintainer
next prev parent reply other threads:[~2014-01-30 14:17 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-30 14:08 NFS client broken in Linus' tip Russell King - ARM Linux
2014-01-30 14:14 ` Christoph Hellwig
2014-01-30 14:27 ` Russell King - ARM Linux
2014-01-30 14:32 ` Christoph Hellwig
2014-01-30 15:38 ` Russell King - ARM Linux
2014-01-31 20:59 ` Trond Myklebust
2014-02-01 1:03 ` Russell King - ARM Linux
2014-02-02 12:27 ` Russell King - ARM Linux
2014-02-02 22:04 ` Trond Myklebust
2014-02-03 9:43 ` Takashi Iwai
2014-02-03 14:21 ` Trond Myklebust
2014-02-03 14:24 ` Takashi Iwai
2014-02-03 8:03 ` Christoph Hellwig
2014-02-03 14:17 ` Trond Myklebust
2014-02-03 14:57 ` Christoph Hellwig
2014-02-03 15:45 ` Trond Myklebust
2014-02-03 20:22 ` Trond Myklebust
2014-02-03 20:25 ` Russell King - ARM Linux
2014-02-03 20:25 ` Christoph Hellwig
2014-02-03 20:32 ` Trond Myklebust
2014-02-03 20:54 ` Christoph Hellwig
2014-01-30 14:17 ` Trond Myklebust [this message]
2014-01-30 14:30 ` Russell King - ARM Linux
2014-01-30 14:45 ` Trond Myklebust
2014-01-30 15:17 ` Root NFS panicing on Linus' tip (Re: NFS client broken in Linus' tip) Ezequiel Garcia
2014-01-30 16:08 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=960A8F94-BDD4-4ED0-95EC-0D71D4AC27E7@primarydata.com \
--to=trond.myklebust@primarydata.com \
--cc=hch@lst.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox