From: Steve Dickson <steved@redhat.com>
To: Jeff Layton <jlayton@kernel.org>
Cc: linux-nfs@vger.kernel.org, Neil Brown <neilb@suse.de>,
Olga Kornievskaia <kolga@netapp.com>,
Dai Ngo <Dai.Ngo@oracle.com>, Tom Talpey <tom@talpey.com>,
Chuck Lever <chuck.lever@oracle.com>,
Lorenzo Bianconi <lorenzo@kernel.org>
Subject: Re: [PATCH nfs-utils v6 0/3] nfsdctl: add a new nfsdctl tool to nfs-utils
Date: Sat, 27 Jul 2024 07:28:33 -0400 [thread overview]
Message-ID: <cc94ec24-5460-408a-b479-70dc19b62311@redhat.com> (raw)
In-Reply-To: <9587ca96fc8cf49852e129857ffebefadff1c436.camel@kernel.org>
On 7/26/24 6:20 PM, Jeff Layton wrote:
> On Fri, 2024-07-26 at 17:59 -0400, Steve Dickson wrote:
>>
>> On 7/26/24 5:32 PM, Jeff Layton wrote:
>>> On Fri, 2024-07-26 at 15:40 -0400, Steve Dickson wrote:
>>>> Hey!
>>>>
>>>> On 7/22/24 1:01 PM, Jeff Layton wrote:
>>>>> Hi Steve,
>>>>>
>>>>> Here's an squashed version of the nfsdctl patches, that represents
>>>>> the latest changes. Let me know if you run into any other problems,
>>>>> and thanks for helping to test this!
>>>>>
>>>>> Signed-off-by: Jeff Layton <jlayton@kernel.org>
>>>>> ---
>>>>> Changes in v6:
>>>>> - make the default number of threads 16 in autostart
>>>>> - doc updates
>>>>>
>>>>> Changes in v5:
>>>>> - add support for pool-mode setting
>>>>> - fix up the handling of nfsd_netlink.h in autoconf
>>>>> - Link to v4:
>>>>> https://lore.kernel.org/r/20240604-nfsdctl-v4-0-a2941f782e4c@kernel.org
>>>>>
>>>>> Changes in v4:
>>>>> - add ability to specify an array of pool thread counts in nfs.conf
>>>>> - Link to v3:
>>>>> https://lore.kernel.org/r/20240423-nfsdctl-v3-0-9e68181c846d@kernel.org
>>>>>
>>>>> Changes in v3:
>>>>> - split nfsdctl.h so we can include the UAPI header as-is
>>>>> - squash the patches together that added Lorenzo's version and
>>>>> convert
>>>>> it to the new interface
>>>>> - adapt to latest version of netlink interface changes
>>>>> + have THREADS_SET/GET report an array of thread counts (one per
>>>>> pool)
>>>>> + pass scope in as a string to THREADS_SET instead of using
>>>>> unshare() trick
>>>>>
>>>>> Changes in v2:
>>>>> - Adapt to latest kernel netlink interface changes (in particular,
>>>>> send
>>>>> the leastime and gracetime when they are set in the config).
>>>>> - More help text for different subcommands
>>>>> - New nfsdctl(8) manpage
>>>>> - Patch to make systemd preferentially use nfsdctl instead of
>>>>> rpc.nfsd
>>>>> - Link to v1:
>>>>> https://lore.kernel.org/r/20240412-nfsdctl-v1-0-efd6dcebcc04@kernel.org
>>>>>
>>>>> ---
>>>>> Jeff Layton (3):
>>>>> nfsdctl: add the nfsdctl utility to nfs-utils
>>>>> nfsdctl: asciidoc source for the manpage
>>>>> systemd: use nfsdctl to start and stop the nfs server
>>>>>
>>>>> configure.ac | 19 +
>>>>> systemd/nfs-server.service | 4 +-
>>>>> utils/Makefile.am | 4 +
>>>>> utils/nfsdctl/Makefile.am | 13 +
>>>>> utils/nfsdctl/nfsd_netlink.h | 96 +++
>>>>> utils/nfsdctl/nfsdctl.8 | 304 ++++++++
>>>>> utils/nfsdctl/nfsdctl.adoc | 158 +++++
>>>>> utils/nfsdctl/nfsdctl.c | 1570
>>>>> ++++++++++++++++++++++++++++++++++++++++++
>>>>> utils/nfsdctl/nfsdctl.h | 93 +++
>>>>> 9 files changed, 2259 insertions(+), 2 deletions(-)
>>>>> ---
>>>>> base-commit: b76dbaa48f7c239accb0c2d1e1d51ddd73f4d6be
>>>>> change-id: 20240412-nfsdctl-fa8bd8430cfd
>>>>
>>>> The patches apply very cleaning and thank you
>>>> for squashing them down... but... bring up the
>>>> NFS server with 'nfsdctl autostart' v3 is not
>>>> being registered with rpcbind which means
>>>> v3 mount will not work.
>>>>
>>>> Just curious are you trying support my
>>>> idea of deprecating V3 :-) (That's a joke!)
>>>>
>>>> steved.
>>>>
>>>
>>> You do need a patched kernel for this:
>>>
>>> https://lore.kernel.org/linux-nfs/Zp5j2DW+2BNaIPif@tissot.1015granger.net/T/#e675642639c59b1c0070f4b19cd03b89cff7983ba
>>>
>>> With a patched kernel, I get this with autostart:
>>>
>>> [kdevops@kdevops-nfsd ~]$ rpcinfo -p
>>> program vers proto port service
>>> 100000 4 tcp 111 portmapper
>>> 100000 3 tcp 111 portmapper
>>> 100000 2 tcp 111 portmapper
>>> 100000 4 udp 111 portmapper
>>> 100000 3 udp 111 portmapper
>>> 100000 2 udp 111 portmapper
>>> 100024 1 udp 42104 status
>>> 100024 1 tcp 40159 status
>>> 100003 3 udp 2049 nfs
>>> 100227 3 udp 2049 nfs_acl
>>> 100003 3 tcp 2049 nfs
>>> 100003 4 tcp 2049 nfs
>>> 100227 3 tcp 2049 nfs_acl
>>> 100021 1 udp 46387 nlockmgr
>>> 100021 3 udp 46387 nlockmgr
>>> 100021 4 udp 46387 nlockmgr
>>> 100021 1 tcp 36565 nlockmgr
>>> 100021 3 tcp 36565 nlockmgr
>>> 100021 4 tcp 36565 nlockmgr
>>>
>>>
>>> Are you seeing different results?
>> Yup
>> uname -r
>> 6.11.0-0.rc0.20240724git786c8248dbd3.12.fc41.x86_64 (rawhide)
>>
>
> Did you patch that kernel by hand then? AFAICT, that git hash doesn't
> have the necessary fix. I don't think Chuck has sent a PR to Linus for
> it just yet.
No I did not... Due to the fact I can not commit theses
patches until the kernel patch land into the distros.
steved.
next prev parent reply other threads:[~2024-07-27 11:28 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-22 17:01 [PATCH nfs-utils v6 0/3] nfsdctl: add a new nfsdctl tool to nfs-utils Jeff Layton
2024-07-22 17:01 ` [PATCH nfs-utils v6 1/3] nfsdctl: add the nfsdctl utility " Jeff Layton
2024-07-22 17:01 ` [PATCH nfs-utils v6 2/3] nfsdctl: asciidoc source for the manpage Jeff Layton
2024-07-22 17:01 ` [PATCH nfs-utils v6 3/3] systemd: use nfsdctl to start and stop the nfs server Jeff Layton
2024-07-26 19:40 ` [PATCH nfs-utils v6 0/3] nfsdctl: add a new nfsdctl tool to nfs-utils Steve Dickson
2024-07-26 21:32 ` Jeff Layton
2024-07-26 21:59 ` Steve Dickson
2024-07-26 22:20 ` Jeff Layton
2024-07-27 11:28 ` Steve Dickson [this message]
2024-07-27 16:03 ` Chuck Lever III
2024-09-30 15:52 ` Jeff Layton
2024-09-30 16:16 ` Steve Dickson
2024-10-16 15:02 ` Jeff Layton
2024-10-16 20:10 ` Steve Dickson
2024-10-17 11:40 ` Steve Dickson
2024-10-17 15:22 ` Jeff Layton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cc94ec24-5460-408a-b479-70dc19b62311@redhat.com \
--to=steved@redhat.com \
--cc=Dai.Ngo@oracle.com \
--cc=chuck.lever@oracle.com \
--cc=jlayton@kernel.org \
--cc=kolga@netapp.com \
--cc=linux-nfs@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=neilb@suse.de \
--cc=tom@talpey.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox