From: hch@lst.de (Christoph Hellwig)
Subject: [PATCH 03/13] nvme-pci: cleanup SQ allocation a bit
Date: Sun, 2 Dec 2018 17:46:18 +0100 [thread overview]
Message-ID: <20181202164628.1116-4-hch@lst.de> (raw)
In-Reply-To: <20181202164628.1116-1-hch@lst.de>
Use a bit flag to mark if the SQ was allocated from the CMB, and clean
up the surrounding code a bit.
Signed-off-by: Christoph Hellwig <hch at lst.de>
Reviewed-by: Keith Busch <keith.busch at intel.com>
---
drivers/nvme/host/pci.c | 33 +++++++++++++++------------------
1 file changed, 15 insertions(+), 18 deletions(-)
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 022395a319f4..b820dd0351cb 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -186,7 +186,6 @@ struct nvme_queue {
struct nvme_dev *dev;
spinlock_t sq_lock;
struct nvme_command *sq_cmds;
- bool sq_cmds_is_io;
spinlock_t cq_lock ____cacheline_aligned_in_smp;
volatile struct nvme_completion *cqes;
struct blk_mq_tags **tags;
@@ -203,6 +202,7 @@ struct nvme_queue {
u8 cq_phase;
unsigned long flags;
#define NVMEQ_ENABLED 0
+#define NVMEQ_SQ_CMB 1
u32 *dbbuf_sq_db;
u32 *dbbuf_cq_db;
u32 *dbbuf_sq_ei;
@@ -1366,17 +1366,15 @@ static void nvme_free_queue(struct nvme_queue *nvmeq)
{
dma_free_coherent(nvmeq->q_dmadev, CQ_SIZE(nvmeq->q_depth),
(void *)nvmeq->cqes, nvmeq->cq_dma_addr);
+ if (!nvmeq->sq_cmds)
+ return;
- if (nvmeq->sq_cmds) {
- if (nvmeq->sq_cmds_is_io)
- pci_free_p2pmem(to_pci_dev(nvmeq->q_dmadev),
- nvmeq->sq_cmds,
- SQ_SIZE(nvmeq->q_depth));
- else
- dma_free_coherent(nvmeq->q_dmadev,
- SQ_SIZE(nvmeq->q_depth),
- nvmeq->sq_cmds,
- nvmeq->sq_dma_addr);
+ if (test_and_clear_bit(NVMEQ_SQ_CMB, &nvmeq->flags)) {
+ pci_free_p2pmem(to_pci_dev(nvmeq->q_dmadev),
+ nvmeq->sq_cmds, SQ_SIZE(nvmeq->q_depth));
+ } else {
+ dma_free_coherent(nvmeq->q_dmadev, SQ_SIZE(nvmeq->q_depth),
+ nvmeq->sq_cmds, nvmeq->sq_dma_addr);
}
}
@@ -1462,15 +1460,14 @@ static int nvme_alloc_sq_cmds(struct nvme_dev *dev, struct nvme_queue *nvmeq,
nvmeq->sq_cmds = pci_alloc_p2pmem(pdev, SQ_SIZE(depth));
nvmeq->sq_dma_addr = pci_p2pmem_virt_to_bus(pdev,
nvmeq->sq_cmds);
- nvmeq->sq_cmds_is_io = true;
- }
-
- if (!nvmeq->sq_cmds) {
- nvmeq->sq_cmds = dma_alloc_coherent(dev->dev, SQ_SIZE(depth),
- &nvmeq->sq_dma_addr, GFP_KERNEL);
- nvmeq->sq_cmds_is_io = false;
+ if (nvmeq->sq_dma_addr) {
+ set_bit(NVMEQ_SQ_CMB, &nvmeq->flags);
+ return 0;
+ }
}
+ nvmeq->sq_cmds = dma_alloc_coherent(dev->dev, SQ_SIZE(depth),
+ &nvmeq->sq_dma_addr, GFP_KERNEL);
if (!nvmeq->sq_cmds)
return -ENOMEM;
return 0;
--
2.19.1
next prev parent reply other threads:[~2018-12-02 16:46 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-02 16:46 block and nvme polling improvements V3 Christoph Hellwig
2018-12-02 16:46 ` [PATCH 01/13] block: move queues types to the block layer Christoph Hellwig
2018-12-04 0:49 ` Sagi Grimberg
2018-12-04 15:00 ` Christoph Hellwig
2018-12-04 17:08 ` Sagi Grimberg
2018-12-02 16:46 ` [PATCH 02/13] nvme-pci: use atomic bitops to mark a queue enabled Christoph Hellwig
2018-12-04 0:54 ` Sagi Grimberg
2018-12-04 15:04 ` Christoph Hellwig
2018-12-04 17:11 ` Sagi Grimberg
2018-12-02 16:46 ` Christoph Hellwig [this message]
2018-12-04 0:55 ` [PATCH 03/13] nvme-pci: cleanup SQ allocation a bit Sagi Grimberg
2018-12-02 16:46 ` [PATCH 04/13] nvme-pci: only allow polling with separate poll queues Christoph Hellwig
2018-12-03 18:23 ` Keith Busch
2018-12-04 0:56 ` Sagi Grimberg
2018-12-02 16:46 ` [PATCH 05/13] nvme-pci: consolidate code for polling non-dedicated queues Christoph Hellwig
2018-12-04 0:58 ` Sagi Grimberg
2018-12-04 15:04 ` Christoph Hellwig
2018-12-04 17:13 ` Sagi Grimberg
2018-12-04 18:19 ` Jens Axboe
2018-12-02 16:46 ` [PATCH 06/13] nvme-pci: refactor nvme_disable_io_queues Christoph Hellwig
2018-12-04 1:00 ` Sagi Grimberg
2018-12-04 15:05 ` Christoph Hellwig
2018-12-04 18:19 ` Jens Axboe
2018-12-02 16:46 ` [PATCH 07/13] nvme-pci: don't poll from irq context when deleting queues Christoph Hellwig
2018-12-03 18:15 ` Keith Busch
2018-12-04 1:05 ` Sagi Grimberg
2018-12-02 16:46 ` [PATCH 08/13] nvme-pci: remove the CQ lock for interrupt driven queues Christoph Hellwig
2018-12-04 1:08 ` Sagi Grimberg
2018-12-02 16:46 ` [PATCH 09/13] nvme-rdma: remove I/O polling support Christoph Hellwig
2018-12-02 16:46 ` [PATCH 10/13] nvme-mpath: " Christoph Hellwig
2018-12-03 18:22 ` Keith Busch
2018-12-04 1:11 ` Sagi Grimberg
2018-12-04 15:07 ` Christoph Hellwig
2018-12-04 17:18 ` Sagi Grimberg
2018-12-02 16:46 ` [PATCH 11/13] block: remove ->poll_fn Christoph Hellwig
2018-12-04 1:11 ` Sagi Grimberg
2018-12-02 16:46 ` [PATCH 12/13] block: only allow polling if a poll queue_map exists Christoph Hellwig
2018-12-04 1:14 ` Sagi Grimberg
2018-12-02 16:46 ` [PATCH 13/13] block: enable polling by default if a poll map is initalized Christoph Hellwig
2018-12-04 1:14 ` Sagi Grimberg
2018-12-04 18:40 ` block and nvme polling improvements V3 Jens Axboe
-- strict thread matches above, loose matches on Subject: below --
2018-11-29 19:12 block and nvme polling improvements V2 Christoph Hellwig
2018-11-29 19:13 ` [PATCH 03/13] nvme-pci: cleanup SQ allocation a bit Christoph Hellwig
2018-11-29 20:22 ` Keith Busch
2018-11-21 16:23 block and nvme polling improvements Christoph Hellwig
2018-11-21 16:23 ` [PATCH 03/13] nvme-pci: cleanup SQ allocation a bit Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181202164628.1116-4-hch@lst.de \
--to=hch@lst.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox