* [PATCH] nvmet: fix the Oops in the tracing for flush cmd @ 2020-10-21 23:28 Chaitanya Kulkarni 2020-10-22 13:22 ` Christoph Hellwig 0 siblings, 1 reply; 2+ messages in thread From: Chaitanya Kulkarni @ 2020-10-21 23:28 UTC (permalink / raw) To: linux-nvme; +Cc: hch, Chaitanya Kulkarni, sagi When target side trace in turned on and flush command is issued from the host it results in the following Oops. [ 856.789724] BUG: kernel NULL pointer dereference, address: 0000000000000068 [ 856.790686] #PF: supervisor read access in kernel mode [ 856.791262] #PF: error_code(0x0000) - not-present page [ 856.791863] PGD 6d7110067 P4D 6d7110067 PUD 66f0ad067 PMD 0 [ 856.792527] Oops: 0000 [#1] SMP NOPTI [ 856.792950] CPU: 15 PID: 7034 Comm: nvme Tainted: G OE 5.9.0nvme-5.9+ #71 [ 856.793790] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e3214 [ 856.794956] RIP: 0010:trace_event_raw_event_nvmet_req_init+0x13e/0x170 [nvmet] [ 856.795734] Code: 41 5c 41 5d c3 31 d2 31 f6 e8 4e 9b b8 e0 e9 0e ff ff ff 49 8b 55 00 48 8b 38 8b 0 [ 856.797740] RSP: 0018:ffffc90001be3a60 EFLAGS: 00010246 [ 856.798375] RAX: 0000000000000000 RBX: ffff8887e7d2c01c RCX: 0000000000000000 [ 856.799234] RDX: 0000000000000020 RSI: 0000000057e70ea2 RDI: ffff8887e7d2c034 [ 856.800088] RBP: ffff88869f710578 R08: ffff888807500d40 R09: 00000000fffffffe [ 856.800951] R10: 0000000064c66670 R11: 00000000ef955201 R12: ffff8887e7d2c034 [ 856.801807] R13: ffff88869f7105c8 R14: 0000000000000040 R15: ffff88869f710440 [ 856.802667] FS: 00007f6a22bd8780(0000) GS:ffff888813a00000(0000) knlGS:0000000000000000 [ 856.803635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 856.804367] CR2: 0000000000000068 CR3: 00000006d73e0000 CR4: 00000000003506e0 [ 856.805283] Call Trace: [ 856.805613] nvmet_req_init+0x27c/0x480 [nvmet] [ 856.806200] nvme_loop_queue_rq+0xcb/0x1d0 [nvme_loop] [ 856.806862] blk_mq_dispatch_rq_list+0x123/0x7b0 [ 856.807459] ? kvm_sched_clock_read+0x14/0x30 [ 856.808025] __blk_mq_sched_dispatch_requests+0xc7/0x170 [ 856.808708] blk_mq_sched_dispatch_requests+0x30/0x60 [ 856.809372] __blk_mq_run_hw_queue+0x70/0x100 [ 856.809935] __blk_mq_delay_run_hw_queue+0x156/0x170 [ 856.810574] blk_mq_run_hw_queue+0x86/0xe0 [ 856.811104] blk_mq_sched_insert_request+0xef/0x160 [ 856.811733] blk_execute_rq+0x69/0xc0 [ 856.812212] ? blk_mq_rq_ctx_init+0xd0/0x230 [ 856.812784] nvme_execute_passthru_rq+0x57/0x130 [nvme_core] [ 856.813461] nvme_submit_user_cmd+0xeb/0x300 [nvme_core] [ 856.814099] nvme_user_cmd.isra.82+0x11e/0x1a0 [nvme_core] [ 856.814752] blkdev_ioctl+0x1dc/0x2c0 [ 856.815197] block_ioctl+0x3f/0x50 [ 856.815606] __x64_sys_ioctl+0x84/0xc0 [ 856.816074] do_syscall_64+0x33/0x40 [ 856.816533] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 856.817168] RIP: 0033:0x7f6a222ed107 [ 856.817617] Code: 44 00 00 48 8b 05 81 cd 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 8 [ 856.819901] RSP: 002b:00007ffca848f058 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 856.820846] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f6a222ed107 [ 856.821726] RDX: 00007ffca848f060 RSI: 00000000c0484e43 RDI: 0000000000000003 [ 856.822603] RBP: 0000000000000003 R08: 000000000000003f R09: 0000000000000005 [ 856.823478] R10: 00007ffca848ece0 R11: 0000000000000202 R12: 00007ffca84912d3 [ 856.824359] R13: 00007ffca848f4d0 R14: 0000000000000002 R15: 000000000067e900 [ 856.825236] Modules linked in: nvme_loop(OE) nvmet(OE) nvme_fabrics(OE) null_blk nvme(OE) nvme_corel Fix this problem by adding a check for NULL namesapce in drivers/nvme/target/trace.h:__assign_disk_name(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> --- drivers/nvme/target/trace.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/target/trace.h b/drivers/nvme/target/trace.h index 0458046d6501..efb79cf898ac 100644 --- a/drivers/nvme/target/trace.h +++ b/drivers/nvme/target/trace.h @@ -54,7 +54,8 @@ static inline void __assign_disk_name(char *name, struct nvmet_req *req, if ((init && req->sq->qid) || (!init && req->cq->qid)) { ns = nvmet_find_namespace(ctrl, req->cmd->rw.nsid); - strncpy(name, ns->device_path, DISK_NAME_LEN); + if (ns) + strncpy(name, ns->device_path, DISK_NAME_LEN); return; } -- 2.22.1 _______________________________________________ Linux-nvme mailing list Linux-nvme@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-nvme ^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] nvmet: fix the Oops in the tracing for flush cmd 2020-10-21 23:28 [PATCH] nvmet: fix the Oops in the tracing for flush cmd Chaitanya Kulkarni @ 2020-10-22 13:22 ` Christoph Hellwig 0 siblings, 0 replies; 2+ messages in thread From: Christoph Hellwig @ 2020-10-22 13:22 UTC (permalink / raw) To: Chaitanya Kulkarni; +Cc: hch, linux-nvme, sagi I think the problem is that the extra namespace lookup doesn't make sense to start with. We'll need to reuse req->ns, and for that move the init tracepoint a bit: diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index aafcbc424b7a94..6b610b68c44226 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -907,8 +907,6 @@ bool nvmet_req_init(struct nvmet_req *req, struct nvmet_cq *cq, req->error_loc = NVMET_NO_ERROR_LOC; req->error_slba = 0; - trace_nvmet_req_init(req, req->cmd); - /* no support for fused commands yet */ if (unlikely(flags & (NVME_CMD_FUSE_FIRST | NVME_CMD_FUSE_SECOND))) { req->error_loc = offsetof(struct nvme_common_command, flags); @@ -937,6 +935,8 @@ bool nvmet_req_init(struct nvmet_req *req, struct nvmet_cq *cq, if (status) goto fail; + + trace_nvmet_req_init(req, req->cmd); if (unlikely(!percpu_ref_tryget_live(&sq->ref))) { status = NVME_SC_INVALID_FIELD | NVME_SC_DNR; diff --git a/drivers/nvme/target/trace.h b/drivers/nvme/target/trace.h index 0458046d650178..c14e3249a14dc8 100644 --- a/drivers/nvme/target/trace.h +++ b/drivers/nvme/target/trace.h @@ -46,19 +46,12 @@ static inline struct nvmet_ctrl *nvmet_req_to_ctrl(struct nvmet_req *req) return req->sq->ctrl; } -static inline void __assign_disk_name(char *name, struct nvmet_req *req, - bool init) +static inline void __assign_req_name(char *name, struct nvmet_req *req) { - struct nvmet_ctrl *ctrl = nvmet_req_to_ctrl(req); - struct nvmet_ns *ns; - - if ((init && req->sq->qid) || (!init && req->cq->qid)) { - ns = nvmet_find_namespace(ctrl, req->cmd->rw.nsid); - strncpy(name, ns->device_path, DISK_NAME_LEN); - return; - } - - memset(name, 0, DISK_NAME_LEN); + if (req->ns) + strncpy(name, req->ns->device_path, DISK_NAME_LEN); + else + memset(name, 0, DISK_NAME_LEN); } #endif @@ -81,7 +74,7 @@ TRACE_EVENT(nvmet_req_init, TP_fast_assign( __entry->cmd = cmd; __entry->ctrl = nvmet_req_to_ctrl(req); - __assign_disk_name(__entry->disk, req, true); + __assign_req_name(__entry->disk, req); __entry->qid = req->sq->qid; __entry->cid = cmd->common.command_id; __entry->opcode = cmd->common.opcode; @@ -121,7 +114,7 @@ TRACE_EVENT(nvmet_req_complete, __entry->cid = req->cqe->command_id; __entry->result = le64_to_cpu(req->cqe->result.u64); __entry->status = le16_to_cpu(req->cqe->status) >> 1; - __assign_disk_name(__entry->disk, req, false); + __assign_req_name(__entry->disk, req); ), TP_printk("nvmet%s: %sqid=%d, cmdid=%u, res=%#llx, status=%#x", __print_ctrl_name(__entry->ctrl), _______________________________________________ Linux-nvme mailing list Linux-nvme@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-nvme ^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-10-22 13:25 UTC | newest] Thread overview: 2+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2020-10-21 23:28 [PATCH] nvmet: fix the Oops in the tracing for flush cmd Chaitanya Kulkarni 2020-10-22 13:22 ` Christoph Hellwig
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox