[PATCH AUTOSEL 5.4 09/19] nvme-pci: ignore the subsysem NQN on Phison E16

[PATCH AUTOSEL 5.4 09/19] nvme-pci: ignore the subsysem NQN on Phison E16

[Sasha Levin]

From: Claus Stovgaard <claus.stovgaard@gmail.com>

[ Upstream commit c9e95c39280530200cdd0bbd2670e6334a81970b ]

Tested both with Corsairs firmware 11.3 and 13.0 for the Corsairs MP600
and both have the issue as reported by the kernel.

nvme nvme0: missing or invalid SUBNQN field.

Signed-off-by: Claus Stovgaard <claus.stovgaard@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index ef93bd3ed339c..511992b86399d 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3147,6 +3147,8 @@ static const struct pci_device_id nvme_id_table[] = {
 	{ PCI_DEVICE(0x144d, 0xa822),   /* Samsung PM1725a */
 		.driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY |
 				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
+	{ PCI_DEVICE(0x1987, 0x5016),	/* Phison E16 */
+		.driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_DEVICE(0x1d1d, 0x1f1f),	/* LighNVM qemu device */
 		.driver_data = NVME_QUIRK_LIGHTNVM, },
 	{ PCI_DEVICE(0x1d1d, 0x2807),	/* CNEX WL */
-- 
2.27.0


_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme