Re: [PATCH 2/5] PCI: Support two-pass shutdown

[Bjorn Helgaas <helgaas@kernel.org>]

On Mon, Jan 29, 2024 at 10:19:50AM -0800, Jeremy Allison wrote:
> From: Tanjore Suresh <tansuresh@google.com>
> 
> Enhance the base PCI driver to add support for two-pass
> shutdown. Add shutdown_wait() method.
> 
> Assume a device takes n secs to shutdown. If a machine has been
> populated with M such devices, the total time spent in shutting down
> all the devices will be M * n secs if the shutdown is done
> synchronously. For example, if NVMe PCI Controllers take 5 secs
> to shutdown and if there are 16 such NVMe controllers in a system,
> system will spend a total of 80 secs to shutdown all
> NVMe devices in that system.
> 
> In order to speed up the shutdown time, a two-pass interface to
> shutdown has been implemented. The caller calls the shutdown method
> for each device in turn to allow a shutdown request to be sent,
> then the caller walks the list of devices and calls shutdown_wait()
> to synchronously wait for the shutdown to complete.
> 
> In the NVMe case above, all 16 devices will process the shutdown
> in parallel taking the total time to shutdown down to the time
> for one NVMe PCI Controller to shut down.
> 
> This will significantly reduce the machine reboot time.
> 
> Signed-off-by: Tanjore Suresh <tansuresh@google.com>
> Signed-off-by: Jeremy Allison <jallison@ciq.com>

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

Please rewrap the commit log to fill 75 columns.

> ---
>  drivers/pci/pci-driver.c | 9 +++++++++
>  include/linux/pci.h      | 2 ++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> index 51ec9e7e784f..257bbb04c806 100644
> --- a/drivers/pci/pci-driver.c
> +++ b/drivers/pci/pci-driver.c
> @@ -547,6 +547,14 @@ static int pci_restore_standard_config(struct pci_dev *pci_dev)
>  }
>  #endif /* CONFIG_PM_SLEEP */
>  
> +static void pci_device_shutdown_wait(struct device *dev)
> +{
> +	struct pci_dev *pci_dev = to_pci_dev(dev);
> +	struct pci_driver *drv = pci_dev->driver;
> +
> +	if (drv && drv->shutdown_wait)
> +		drv->shutdown_wait(pci_dev);
> +}
>  #ifdef CONFIG_PM
>  
>  /* Auxiliary functions used for system resume and run-time resume */
> @@ -1682,6 +1690,7 @@ struct bus_type pci_bus_type = {
>  	.probe		= pci_device_probe,
>  	.remove		= pci_device_remove,
>  	.shutdown	= pci_device_shutdown,
> +	.shutdown_wait	= pci_device_shutdown_wait,
>  	.dev_groups	= pci_dev_groups,
>  	.bus_groups	= pci_bus_groups,
>  	.drv_groups	= pci_drv_groups,
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index add9368e6314..5ef014ac84f2 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -917,6 +917,7 @@ struct module;
>   *		Useful for enabling wake-on-lan (NIC) or changing
>   *		the power state of a device before reboot.
>   *		e.g. drivers/net/e100.c.
> + * @shutdown_wait: Optional driver callback to allow two-pass shutdown.
>   * @sriov_configure: Optional driver callback to allow configuration of
>   *		number of VFs to enable via sysfs "sriov_numvfs" file.
>   * @sriov_set_msix_vec_count: PF Driver callback to change number of MSI-X
> @@ -947,6 +948,7 @@ struct pci_driver {
>  	int  (*suspend)(struct pci_dev *dev, pm_message_t state);	/* Device suspended */
>  	int  (*resume)(struct pci_dev *dev);	/* Device woken up */
>  	void (*shutdown)(struct pci_dev *dev);
> +	void (*shutdown_wait)(struct pci_dev *dev);
>  	int  (*sriov_configure)(struct pci_dev *dev, int num_vfs); /* On PF */
>  	int  (*sriov_set_msix_vec_count)(struct pci_dev *vf, int msix_vec_count); /* On PF */
>  	u32  (*sriov_get_vf_total_msix)(struct pci_dev *pf);
> -- 
> 2.39.3
> 
>