Linux-NVME Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Martin Wilck <martin.wilck@suse.com>
To: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>,
	Hannes Reinecke <hare@suse.de>, Daniel Wagner <dwagner@suse.de>,
	linux-block@vger.kernel.org, linux-nvme@lists.infradead.org,
	Martin Wilck <mwilck@suse.com>
Subject: [PATCH 1/3] blktests: nvme: skip passthru tests on multipath devices
Date: Thu, 22 Aug 2024 21:38:12 +0200	[thread overview]
Message-ID: <20240822193814.106111-1-mwilck@suse.com> (raw)

NVMe multipath devices have no associated character device that
can be used for NVMe passtrhu. Skip them.

Signed-off-by: Martin Wilck <mwilck@suse.com>
---
 tests/nvme/033 | 4 ++++
 tests/nvme/034 | 4 ++++
 tests/nvme/035 | 1 +
 tests/nvme/036 | 4 ++++
 tests/nvme/037 | 4 ++++
 tests/nvme/039 | 4 ++++
 tests/nvme/rc  | 8 ++++++++
 7 files changed, 29 insertions(+)

diff --git a/tests/nvme/033 b/tests/nvme/033
index 7a69b94..dda0763 100755
--- a/tests/nvme/033
+++ b/tests/nvme/033
@@ -13,6 +13,10 @@ requires() {
 	_have_kernel_option NVME_TARGET_PASSTHRU
 }
 
+device_requires() {
+	_require_test_dev_is_nvme_no_mpath
+}
+
 set_conditions() {
 	_set_nvme_trtype "$@"
 }
diff --git a/tests/nvme/034 b/tests/nvme/034
index 239757c..41f1542 100755
--- a/tests/nvme/034
+++ b/tests/nvme/034
@@ -14,6 +14,10 @@ requires() {
 	_have_fio
 }
 
+device_requires() {
+	_require_test_dev_is_nvme_no_mpath
+}
+
 set_conditions() {
 	_set_nvme_trtype "$@"
 }
diff --git a/tests/nvme/035 b/tests/nvme/035
index 8286178..4357efa 100755
--- a/tests/nvme/035
+++ b/tests/nvme/035
@@ -17,6 +17,7 @@ requires() {
 }
 
 device_requires() {
+	_require_test_dev_is_nvme_no_mpath
 	_require_test_dev_size "${NVME_IMG_SIZE}"
 }
 
diff --git a/tests/nvme/036 b/tests/nvme/036
index ef6c29d..3a28cb7 100755
--- a/tests/nvme/036
+++ b/tests/nvme/036
@@ -13,6 +13,10 @@ requires() {
 	_have_kernel_option NVME_TARGET_PASSTHRU
 }
 
+device_requires() {
+	_require_test_dev_is_nvme_no_mpath
+}
+
 set_conditions() {
 	_set_nvme_trtype "$@"
 }
diff --git a/tests/nvme/037 b/tests/nvme/037
index ef7ac59..557d491 100755
--- a/tests/nvme/037
+++ b/tests/nvme/037
@@ -12,6 +12,10 @@ requires() {
 	_have_kernel_option NVME_TARGET_PASSTHRU
 }
 
+device_requires() {
+	_require_test_dev_is_nvme_no_mpath
+}
+
 set_conditions() {
 	_set_nvme_trtype "$@"
 }
diff --git a/tests/nvme/039 b/tests/nvme/039
index a0f135c..ff8c1eb 100755
--- a/tests/nvme/039
+++ b/tests/nvme/039
@@ -18,6 +18,10 @@ requires() {
 	    _have_kernel_option FAULT_INJECTION_DEBUG_FS
 }
 
+device_requires() {
+	_require_test_dev_is_nvme_no_mpath
+}
+
 # Get the last dmesg lines as many as specified. Exclude the lines to indicate
 # suppression by rate limit.
 last_dmesg()
diff --git a/tests/nvme/rc b/tests/nvme/rc
index dedc412..b3b1149 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -130,6 +130,14 @@ _require_test_dev_is_nvme() {
 	return 0
 }
 
+_require_test_dev_is_nvme_no_mpath() {
+	if [[ "$(readlink -f "$TEST_DEV_SYSFS/device")" =~ /nvme-subsystem/ ]]; then
+		SKIP_REASONS+=("$TEST_DEV is a NVMe multipath device")
+		return 1
+	fi
+	return 0
+}
+
 _require_nvme_test_img_size() {
 	local require_sz_mb
 	local nvme_img_size_mb
-- 
2.46.0



             reply	other threads:[~2024-08-22 19:38 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-22 19:38 Martin Wilck [this message]
2024-08-22 19:38 ` [PATCH 2/3] blktests: nvme/032: skip on non-PCI devices Martin Wilck
2024-08-23  6:46   ` Daniel Wagner
2024-08-22 19:38 ` [PATCH 3/3] nvme: add test for controller rescan under I/O load Martin Wilck
2024-08-23  6:45   ` Daniel Wagner
2024-08-23  6:50     ` Martin Wilck
2024-08-23  7:03       ` Daniel Wagner
2024-08-23 10:18   ` Nilay Shroff
2024-08-23 13:39     ` Nilay Shroff
2024-08-23 14:49     ` Martin Wilck
2024-08-23  6:35 ` [PATCH 1/3] blktests: nvme: skip passthru tests on multipath devices Daniel Wagner
2024-08-23  6:41   ` Martin Wilck
2024-08-23  7:07     ` Daniel Wagner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240822193814.106111-1-mwilck@suse.com \
    --to=martin.wilck@suse.com \
    --cc=Chaitanya.Kulkarni@wdc.com \
    --cc=dwagner@suse.de \
    --cc=hare@suse.de \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=mwilck@suse.com \
    --cc=shinichiro.kawasaki@wdc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox