Linux-NVME Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Maurizio Lombardi <mlombard@redhat.com>
To: kbusch@kernel.org
Cc: mheyne@amazon.de, emilne@redhat.com, jmeneghi@redhat.com,
	linux-nvme@lists.infradead.org, dwagner@suse.de,
	mlombard@arkamax.eu, mkhalfella@purestorage.com,
	chaitanyak@nvidia.com, hare@kernel.org, hch@lst.de
Subject: [PATCH V4 8/9] nvmet-loop: do not alloc admin tag set during reset
Date: Fri,  8 May 2026 15:33:34 +0200	[thread overview]
Message-ID: <20260508133335.98612-9-mlombard@redhat.com> (raw)
In-Reply-To: <20260508133335.98612-1-mlombard@redhat.com>

Currently, resetting a loopback controller unconditionally invokes
nvme_alloc_admin_tag_set() inside nvme_loop_configure_admin_queue().
Doing so drops the old queue and allocates a new one. Consequently,
this reverts the admin queue's timeout (q->rq_timeout) back to the
module default (NVME_ADMIN_TIMEOUT), completely wiping out any custom
timeout values the user may have configured via sysfs and potentially
racing against the sysfs nvme_admin_timeout_store() function
that may dereference the admin_q pointer during the RESETTING state.

Decouple the admin tag set lifecycle from the admin queue
configuration and destruction paths, which are executed during resets;
Specifically:

* Move nvme_alloc_admin_tag_set() into nvme_loop_create_ctrl() so it
  is only allocated once during the initial controller creation.

* Defer the destruction of the admin tag set to
  nvme_loop_delete_ctrl_host() and the terminal error-handling
  paths of nvme_loop_reset_ctrl_work() and
  nvme_loop_create_ctrl().

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
---
 drivers/nvme/target/loop.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
index d98d0cdc5d6f..070d16068e6b 100644
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -274,7 +274,6 @@ static void nvme_loop_destroy_admin_queue(struct nvme_loop_ctrl *ctrl)
 
 	nvmet_sq_destroy(&ctrl->queues[0].nvme_sq);
 	nvmet_cq_put(&ctrl->queues[0].nvme_cq);
-	nvme_remove_admin_tag_set(&ctrl->ctrl);
 }
 
 static void nvme_loop_free_ctrl(struct nvme_ctrl *nctrl)
@@ -375,25 +374,18 @@ static int nvme_loop_configure_admin_queue(struct nvme_loop_ctrl *ctrl)
 	}
 	ctrl->ctrl.queue_count = 1;
 
-	error = nvme_alloc_admin_tag_set(&ctrl->ctrl, &ctrl->admin_tag_set,
-			&nvme_loop_admin_mq_ops,
-			sizeof(struct nvme_loop_iod) +
-			NVME_INLINE_SG_CNT * sizeof(struct scatterlist));
-	if (error)
-		goto out_free_sq;
-
 	/* reset stopped state for the fresh admin queue */
 	clear_bit(NVME_CTRL_ADMIN_Q_STOPPED, &ctrl->ctrl.flags);
 
 	error = nvmf_connect_admin_queue(&ctrl->ctrl);
 	if (error)
-		goto out_cleanup_tagset;
+		goto out_free_sq;
 
 	set_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags);
 
 	error = nvme_enable_ctrl(&ctrl->ctrl);
 	if (error)
-		goto out_cleanup_tagset;
+		goto out_free_sq;
 
 	ctrl->ctrl.max_hw_sectors =
 		(NVME_LOOP_MAX_SEGMENTS - 1) << PAGE_SECTORS_SHIFT;
@@ -402,14 +394,12 @@ static int nvme_loop_configure_admin_queue(struct nvme_loop_ctrl *ctrl)
 
 	error = nvme_init_ctrl_finish(&ctrl->ctrl, false);
 	if (error)
-		goto out_cleanup_tagset;
+		goto out_free_sq;
 
 	return 0;
 
-out_cleanup_tagset:
-	clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags);
-	nvme_remove_admin_tag_set(&ctrl->ctrl);
 out_free_sq:
+	clear_bit(NVME_LOOP_Q_LIVE, &ctrl->queues[0].flags);
 	nvmet_sq_destroy(&ctrl->queues[0].nvme_sq);
 	nvmet_cq_put(&ctrl->queues[0].nvme_cq);
 	return error;
@@ -432,6 +422,7 @@ static void nvme_loop_shutdown_ctrl(struct nvme_loop_ctrl *ctrl)
 static void nvme_loop_delete_ctrl_host(struct nvme_ctrl *ctrl)
 {
 	nvme_loop_shutdown_ctrl(to_loop_ctrl(ctrl));
+	nvme_remove_admin_tag_set(ctrl);
 }
 
 static void nvme_loop_delete_ctrl(struct nvmet_ctrl *nctrl)
@@ -494,6 +485,7 @@ static void nvme_loop_reset_ctrl_work(struct work_struct *work)
 	nvme_cancel_admin_tagset(&ctrl->ctrl);
 	nvme_loop_destroy_admin_queue(ctrl);
 out_disable:
+	nvme_remove_admin_tag_set(&ctrl->ctrl);
 	dev_warn(ctrl->ctrl.device, "Removing after reset failure\n");
 	nvme_uninit_ctrl(&ctrl->ctrl);
 }
@@ -594,10 +586,17 @@ static struct nvme_ctrl *nvme_loop_create_ctrl(struct device *dev,
 	if (!ctrl->queues)
 		goto out_uninit_ctrl;
 
-	ret = nvme_loop_configure_admin_queue(ctrl);
+	ret = nvme_alloc_admin_tag_set(&ctrl->ctrl, &ctrl->admin_tag_set,
+			&nvme_loop_admin_mq_ops,
+			sizeof(struct nvme_loop_iod) +
+			NVME_INLINE_SG_CNT * sizeof(struct scatterlist));
 	if (ret)
 		goto out_free_queues;
 
+	ret = nvme_loop_configure_admin_queue(ctrl);
+	if (ret)
+		goto out_remove_admin_tagset;
+
 	if (opts->queue_size > ctrl->ctrl.maxcmd) {
 		/* warn if maxcmd is lower than queue_size */
 		dev_warn(ctrl->ctrl.device,
@@ -633,6 +632,8 @@ static struct nvme_ctrl *nvme_loop_create_ctrl(struct device *dev,
 	nvme_quiesce_admin_queue(&ctrl->ctrl);
 	nvme_cancel_admin_tagset(&ctrl->ctrl);
 	nvme_loop_destroy_admin_queue(ctrl);
+out_remove_admin_tagset:
+	nvme_remove_admin_tag_set(&ctrl->ctrl);
 out_free_queues:
 	kfree(ctrl->queues);
 out_uninit_ctrl:
-- 
2.54.0



  parent reply	other threads:[~2026-05-08 13:34 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-08 13:33 [PATCH V4 0/9] nvme: Refactor and expose per-controller timeout configuration Maurizio Lombardi
2026-05-08 13:33 ` [PATCH V4 1/9] nvme: Let the blocklayer set timeouts for requests Maurizio Lombardi
2026-05-11  9:37   ` Hannes Reinecke
2026-05-08 13:33 ` [PATCH V4 2/9] nvme: add sysfs attribute to change admin timeout per nvme controller Maurizio Lombardi
2026-05-08 16:57   ` Daniel Wagner
2026-05-10 22:10   ` Sagi Grimberg
2026-05-11  8:07   ` Christoph Hellwig
2026-05-11 11:29     ` Maurizio Lombardi
2026-05-11 12:31       ` Christoph Hellwig
2026-05-11  9:46   ` Hannes Reinecke
2026-05-11 10:05     ` Maurizio Lombardi
2026-05-08 13:33 ` [PATCH V4 3/9] nvme: fix race condition between connected uevent and STARTED_ONCE flag Maurizio Lombardi
2026-05-08 16:57   ` Daniel Wagner
2026-05-10 22:10   ` Sagi Grimberg
2026-05-11  8:07     ` Christoph Hellwig
2026-05-11 12:54       ` Sagi Grimberg
2026-05-11 15:09         ` Keith Busch
2026-05-11 15:45           ` Maurizio Lombardi
2026-05-11 17:10             ` Keith Busch
2026-05-11  8:08   ` Christoph Hellwig
2026-05-11  9:47   ` Hannes Reinecke
2026-05-08 13:33 ` [PATCH V4 4/9] nvme: pci: use admin queue timeout over NVME_ADMIN_TIMEOUT Maurizio Lombardi
2026-05-10 22:10   ` Sagi Grimberg
2026-05-11  8:08   ` Christoph Hellwig
2026-05-11  9:48   ` Hannes Reinecke
2026-05-08 13:33 ` [PATCH V4 5/9] nvme: add sysfs attribute to change IO timeout per controller Maurizio Lombardi
2026-05-08 17:08   ` Daniel Wagner
2026-05-10 22:12   ` Sagi Grimberg
2026-05-11  8:52     ` Maurizio Lombardi
2026-05-08 13:33 ` [PATCH V4 6/9] nvme: use per controller timeout waits over depending on global default Maurizio Lombardi
2026-05-11  8:10   ` Christoph Hellwig
2026-05-11 11:42     ` Maurizio Lombardi
2026-05-11 12:32       ` Christoph Hellwig
2026-05-11  9:50   ` Hannes Reinecke
2026-05-08 13:33 ` [PATCH V4 7/9] nvme-core: align fabrics_q teardown with admin_q in nvme_free_ctrl Maurizio Lombardi
2026-05-10 22:15   ` Sagi Grimberg
2026-05-11  8:11   ` Christoph Hellwig
2026-05-11  9:53   ` Hannes Reinecke
2026-05-11  9:57     ` Maurizio Lombardi
2026-05-08 13:33 ` Maurizio Lombardi [this message]
2026-05-08 17:09   ` [PATCH V4 8/9] nvmet-loop: do not alloc admin tag set during reset Daniel Wagner
2026-05-10 22:16   ` Sagi Grimberg
2026-05-11  8:12   ` Christoph Hellwig
2026-05-11  9:55   ` Hannes Reinecke
2026-05-08 13:33 ` [PATCH V4 9/9] nvme-core: warn on allocating admin tag set with existing queue Maurizio Lombardi
2026-05-10 22:16   ` Sagi Grimberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260508133335.98612-9-mlombard@redhat.com \
    --to=mlombard@redhat.com \
    --cc=chaitanyak@nvidia.com \
    --cc=dwagner@suse.de \
    --cc=emilne@redhat.com \
    --cc=hare@kernel.org \
    --cc=hch@lst.de \
    --cc=jmeneghi@redhat.com \
    --cc=kbusch@kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=mheyne@amazon.de \
    --cc=mkhalfella@purestorage.com \
    --cc=mlombard@arkamax.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox