NVME 1.2 support

NVME 1.2 support

[Rama kiran kumar Indrakanti]

Hello,

Would like to know if NVME 1.2 spec is supported in the open source.
As per the linux-driver-information page it says 1.0c.

Regards,
Ram



::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.

----------------------------------------------------------------------------------------------------------------------------------------------------

NVME 1.2 support

[Keith Busch]

On Wed, 10 Jun 2015, Rama kiran kumar Indrakanti wrote:
> Would like to know if NVME 1.2 spec is supported in the open source.
> As per the linux-driver-information page it says 1.0c.

Is there a particular 1.2 feature you're asking about?

NVME 1.2 support

[Rama kiran kumar Indrakanti]

From: Keith Busch [mailto:keith.busch@intel.com] 
Sent: Wednesday, June 10, 2015 7:16 PM
To: Rama kiran kumar Indrakanti
Cc: linux-nvme at lists.infradead.org
Subject: Re: NVME 1.2 support

On Wed, 10 Jun 2015, Rama kiran kumar Indrakanti wrote:
>> Would like to know if NVME 1.2 spec is supported in the open source.
>> As per the linux-driver-information page it says 1.0c.

>Is there a particular 1.2 feature you're asking about?
I am looking for get log page


::DISCLAIMER::
----------------------------------------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
(with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
distribution and / or publication of this message without the prior written consent of authorized representative of
HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
Before opening any email and/or attachments, please check them for viruses and other defects.

----------------------------------------------------------------------------------------------------------------------------------------------------

NVME 1.2 support

[Keith Busch]

On Wed, 10 Jun 2015, Rama kiran kumar Indrakanti wrote:
> On Wed, 10 Jun 2015, Rama kiran kumar Indrakanti wrote:
>>> Would like to know if NVME 1.2 spec is supported in the open source.
>>> As per the linux-driver-information page it says 1.0c.
>
>> Is there a particular 1.2 feature you're asking about?
> I am looking for get log page

That's a 1.0 feature, but you're looking for this in the driver? I'm
not sure what a driver would do with that. You can get any arbitrary
log page from user space, though.