Linux-NVME Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: Caleb Sander <csander@purestorage.com>
Cc: Keith Busch <kbusch@kernel.org>, Jens Axboe <axboe@kernel.dk>,
	Christoph Hellwig <hch@lst.de>, Sagi Grimberg <sagi@grimberg.me>,
	Maurizio Lombardi <mlombard@redhat.com>,
	linux-nvme@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4] nvme-tcp: fix connect failure on receiving partial ICResp PDU
Date: Tue, 28 Jan 2025 09:28:50 +0100	[thread overview]
Message-ID: <f75c62ce-04a7-4bc0-ae77-8ed80842bf37@suse.de> (raw)
In-Reply-To: <CADUfDZoT7JW+d+j6YNmWJ3CKZ45gbvcUSsE6boZwE1C3iXw2_g@mail.gmail.com>

On 1/27/25 18:38, Caleb Sander wrote:
> On Sun, Jan 26, 2025 at 11:37 PM Hannes Reinecke <hare@suse.de> wrote:
>>
>> On 1/24/25 19:43, Caleb Sander Mateos wrote:
>>> nvme_tcp_init_connection() attempts to receive an ICResp PDU but only
>>> checks that the return value from recvmsg() is non-negative. If the
>>> sender closes the TCP connection or sends fewer than 128 bytes, this
>>> check will pass even though the full PDU wasn't received.
>>>
>>> Ensure the full ICResp PDU is received by checking that recvmsg()
>>> returns the expected 128 bytes.
>>>
>>> Additionally set the MSG_WAITALL flag for recvmsg(), as a sender could
>>> split the ICResp over multiple TCP frames. Without MSG_WAITALL,
>>> recvmsg() could return prematurely with only part of the PDU.
>>>
>>> Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
>>> Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
>>> ---
>>> v4: keep recvmsg() error return value
>>> v3: fix return value to indicate error
>>> v2: add Fixes tag
>>>
>>>    drivers/nvme/host/tcp.c | 5 ++++-
>>>    1 file changed, 4 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
>>> index e9ff6babc540..56679eb8c0d6 100644
>>> --- a/drivers/nvme/host/tcp.c
>>> +++ b/drivers/nvme/host/tcp.c
>>> @@ -1446,15 +1446,18 @@ static int nvme_tcp_init_connection(struct nvme_tcp_queue *queue)
>>>        iov.iov_len = sizeof(*icresp);
>>>        if (nvme_tcp_queue_tls(queue)) {
>>>                msg.msg_control = cbuf;
>>>                msg.msg_controllen = sizeof(cbuf);
>>>        }
>>> +     msg.msg_flags = MSG_WAITALL;
>>>        ret = kernel_recvmsg(queue->sock, &msg, &iov, 1,
>>>                        iov.iov_len, msg.msg_flags);
>>
>> But won't we have to wait for a TCP timeout now if the sender sends less
>> than 128 bytes? With this patch we always wait for 128 bytes, and
>> possibly wait for TCP timeout if not.
> 
> Yes, if the NVMe/TCP controller sends less than 128 bytes, we need to
> wait for it to send the remainder of the ICResp PDU. That's just how
> the NVMe/TCP protocol works. If we want to protect against
> buggy/malicious controllers that don't send a full ICResp, we need a
> timeout mechanism. That's the purpose of the existing
> `queue->sock->sk->sk_rcvtimeo = 10 * HZ;` in nvme_tcp_alloc_queue().
> Note that recvmsg() timing out was already possible in the original
> code if the controller didn't send anything on the TCP connection
> after accepting it.
> 
Hmm. With checking the code 'rcvtimeo' is only evaluated if MSG_WAITALL
is _not_ set. Makes me wonder why we do set it...
But that's beside the point.

>> Testcase for this would be nice ...
>>
>> And I need to check if secure concatenation is affected here; with
>> secure concatenation we need to peek at the first packet to check
>> if it's an ICRESP or a TLS negotiation.
> 
> Are you saying that with secure concatenation we don't know in advance
> whether the connection is using TLS between the TCP and NVMe/TCP
> protocol layers? Wouldn't the host already need to know that when it
> sent its ICReq PDU?

No, the host doesn't need to know. TLS is enabled by the lower
layers.

But upon further checking, I guess it'll be okay with secure
concatenation.

Nevertheless, I would vastly prefer to have a receive loop here
instead of waiting to receive the full amount as per MSG_WAITALL.
The entire tcp code is using nonblocking calls, so I'd rather
keep it that way and implement a receive loop here.

Cheers,

Hannes
-- 
Dr. Hannes Reinecke                  Kernel Storage Architect
hare@suse.de                                +49 911 74053 688
SUSE Software Solutions GmbH, Frankenstr. 146, 90461 Nürnberg
HRB 36809 (AG Nürnberg), GF: I. Totev, A. McDonald, W. Knoblich


  parent reply	other threads:[~2025-01-28  8:37 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-24 18:43 [PATCH v4] nvme-tcp: fix connect failure on receiving partial ICResp PDU Caleb Sander Mateos
2025-01-26  8:01 ` Sagi Grimberg
2025-01-27  7:37 ` Hannes Reinecke
2025-01-27  8:09   ` Hannes Reinecke
2025-01-27 18:06     ` Caleb Sander
2025-01-27 17:38   ` Caleb Sander
2025-01-27 17:51     ` Maurizio Lombardi
2025-01-28  8:28     ` Hannes Reinecke [this message]
2025-01-28 22:02       ` Caleb Sander
2025-01-31  8:17         ` Sagi Grimberg
2025-02-03  0:19           ` Caleb Sander
2025-02-03  7:20             ` Hannes Reinecke
2025-02-04 22:20               ` Caleb Sander
2025-02-10 17:24                 ` Caleb Sander
2025-02-11 22:20                   ` Hannes Reinecke
2025-02-17  7:11                   ` Sagi Grimberg
2025-02-18 15:45 ` Keith Busch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f75c62ce-04a7-4bc0-ae77-8ed80842bf37@suse.de \
    --to=hare@suse.de \
    --cc=axboe@kernel.dk \
    --cc=csander@purestorage.com \
    --cc=hch@lst.de \
    --cc=kbusch@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=mlombard@redhat.com \
    --cc=sagi@grimberg.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox