From: Kevin Hilman <khilman@deeprootsystems.com>
To: linux-omap@vger.kernel.org
Cc: paul@pwsan.com
Subject: [PATCH v2 06/13] OMAP: hwmod: add non-locking versions of enable and idle functions
Date: Thu, 24 Jun 2010 16:44:37 -0700 [thread overview]
Message-ID: <1277423084-25528-7-git-send-email-khilman@deeprootsystems.com> (raw)
In-Reply-To: <1277423084-25528-1-git-send-email-khilman@deeprootsystems.com>
Some hwmods may need to be idled/enabled in atomic context, so
non-locking versions of these functions are required.
Most users should not need these and usage of theses should be
controlled to understand why access is being done in atomic context.
For this reason, the non-locking functions are only exposed at the
hwmod level and not at the omap-device level.
The use-case that led to the need for the non-locking versions is
hwmods that are enabled/idled from within the core idle/suspend path.
Since interrupts are already disabled here, the mutex-based locking in
hwmod can sleep and will cause potential deadlocks.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
arch/arm/mach-omap2/omap_hwmod.c | 19 ++++++++++---------
arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 ++
2 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 3d11523..fa11139 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -886,7 +886,7 @@ static int _reset(struct omap_hwmod *oh)
}
/**
- * _enable - enable an omap_hwmod
+ * _omap_hwmod_enable - enable an omap_hwmod
* @oh: struct omap_hwmod *
*
* Enables an omap_hwmod @oh such that the MPU can access the hwmod's
@@ -894,7 +894,7 @@ static int _reset(struct omap_hwmod *oh)
* Returns -EINVAL if the hwmod is in the wrong state or passes along
* the return value of _wait_target_ready().
*/
-static int _enable(struct omap_hwmod *oh)
+int _omap_hwmod_enable(struct omap_hwmod *oh)
{
int r;
@@ -939,7 +939,7 @@ static int _enable(struct omap_hwmod *oh)
* no further work. Returns -EINVAL if the hwmod is in the wrong
* state or returns 0.
*/
-static int _idle(struct omap_hwmod *oh)
+int _omap_hwmod_idle(struct omap_hwmod *oh)
{
/*
* To idle, hwmod must be enabled, EXCEPT if hwmod was
@@ -1038,7 +1038,7 @@ static int _setup(struct omap_hwmod *oh)
oh->_state = _HWMOD_STATE_INITIALIZED;
- r = _enable(oh);
+ r = _omap_hwmod_enable(oh);
if (r) {
pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
oh->name, oh->_state);
@@ -1050,7 +1050,7 @@ static int _setup(struct omap_hwmod *oh)
* XXX Do the OCP_SYSCONFIG bits need to be
* reprogrammed after a reset? If not, then this can
* be removed. If they do, then probably the
- * _enable() function should be split to avoid the
+ * _omap_hwmod_enable() function should be split to avoid the
* rewrite of the OCP_SYSCONFIG register.
*/
if (oh->class->sysc) {
@@ -1060,7 +1060,7 @@ static int _setup(struct omap_hwmod *oh)
}
if (!(oh->flags & HWMOD_INIT_NO_IDLE))
- _idle(oh);
+ _omap_hwmod_idle(oh);
return 0;
}
@@ -1301,12 +1301,13 @@ int omap_hwmod_enable(struct omap_hwmod *oh)
return -EINVAL;
mutex_lock(&omap_hwmod_mutex);
- r = _enable(oh);
+ r = _omap_hwmod_enable(oh);
mutex_unlock(&omap_hwmod_mutex);
return r;
}
+
/**
* omap_hwmod_idle - idle an omap_hwmod
* @oh: struct omap_hwmod *
@@ -1320,7 +1321,7 @@ int omap_hwmod_idle(struct omap_hwmod *oh)
return -EINVAL;
mutex_lock(&omap_hwmod_mutex);
- _idle(oh);
+ _omap_hwmod_idle(oh);
mutex_unlock(&omap_hwmod_mutex);
return 0;
@@ -1422,7 +1423,7 @@ int omap_hwmod_reset(struct omap_hwmod *oh)
mutex_lock(&omap_hwmod_mutex);
r = _reset(oh);
if (!r)
- r = _enable(oh);
+ r = _omap_hwmod_enable(oh);
mutex_unlock(&omap_hwmod_mutex);
return r;
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 0eccc09..253f6e5 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -486,7 +486,9 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
int omap_hwmod_late_init(void);
int omap_hwmod_enable(struct omap_hwmod *oh);
+int _omap_hwmod_enable(struct omap_hwmod *oh);
int omap_hwmod_idle(struct omap_hwmod *oh);
+int _omap_hwmod_idle(struct omap_hwmod *oh);
int omap_hwmod_shutdown(struct omap_hwmod *oh);
int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
--
1.7.0.2
next prev parent reply other threads:[~2010-06-24 23:44 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-24 23:44 [PATCH v2 00/13] OMAP: CM, hwmod, omap_device fixes and updates Kevin Hilman
2010-06-24 23:44 ` [PATCH v2 01/13] OMAP24xx: CM: fix mask used for checking IDLEST status Kevin Hilman
2010-06-24 23:44 ` [PATCH v2 02/13] OMAP: hwmod: allow idle after HWMOD_INIT_NO_IDLE Kevin Hilman
2010-06-24 23:44 ` [PATCH v2 03/13] OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST Kevin Hilman
2010-06-24 23:44 ` [PATCH v2 04/13] OMAP: hwmod: Fix the missing braces Kevin Hilman
2010-07-02 11:49 ` Paul Walmsley
2010-06-24 23:44 ` [PATCH v2 05/13] OMAP2&3: hwmod: Remove _hwmod prefix in name string Kevin Hilman
2010-06-24 23:44 ` Kevin Hilman [this message]
2010-06-24 23:44 ` [PATCH v2 07/13] OMAP: hwmod: don't auto-disable hwmod when !CONFIG_PM_RUNTIME Kevin Hilman
2010-06-24 23:44 ` [PATCH v2 08/13] OMAP4: hwmod: Enable omap_device build for OMAP4 Kevin Hilman
2010-06-25 13:16 ` Cousson, Benoit
2010-06-25 17:27 ` Kevin Hilman
2010-06-24 23:44 ` [PATCH v2 09/13] OMAP: omap_device: ensure hwmod tracks attached omap_device pointer Kevin Hilman
2010-07-02 9:05 ` Paul Walmsley
2010-06-24 23:44 ` [PATCH v2 10/13] OMAP: create omap_devices for MPU, DSP, L3 Kevin Hilman
2010-06-26 16:08 ` DebBarma, Tarun Kanti
2010-06-29 17:29 ` Kevin Hilman
2010-06-30 4:18 ` Gopinath, Thara
2010-06-30 20:38 ` Kevin Hilman
2010-07-01 4:04 ` Gopinath, Thara
2010-07-01 4:16 ` Shilimkar, Santosh
2010-07-01 4:20 ` Gopinath, Thara
2010-07-02 11:45 ` Paul Walmsley
2010-07-02 15:08 ` Paul Walmsley
2010-06-24 23:44 ` [PATCH v2 11/13] OMAP: hwmod data: add class for IVA hwmods Kevin Hilman
2010-06-24 23:44 ` [PATCH v2 12/13] OMAP2&3: hwmod: Replace l3 -> l3_main Kevin Hilman
2010-06-24 23:44 ` [PATCH v2 13/13] OMAP3: hwmod data: add data for OMAP3 IVA2 Kevin Hilman
2010-07-02 11:50 ` [PATCH v2 00/13] OMAP: CM, hwmod, omap_device fixes and updates Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1277423084-25528-7-git-send-email-khilman@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=linux-omap@vger.kernel.org \
--cc=paul@pwsan.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox