Linux on ARM based TI OMAP SoCs
 help / color / mirror / Atom feed
* [PATCH 1/2] USB: musb-gadget: fix bulk IN infinite hangs in double buffer case
@ 2010-08-27 11:37 tom.leiming
  2010-08-27 13:40 ` Gadiyar, Anand
  2010-08-27 20:27 ` Mike Frysinger
  0 siblings, 2 replies; 6+ messages in thread
From: tom.leiming @ 2010-08-27 11:37 UTC (permalink / raw)
  To: greg, dbrownell, felipe.balbi
  Cc: linux-usb, linux-omap, Ming Lei, Anand Gadiyar, Mike Frysinger,
	Sergei Shtylyov

From: Ming Lei <tom.leiming@gmail.com>

This patch fixes one infinite hang of bulk IN transfer in double buffer
case, the hang can be observed easily by test #6 of usbtest if musb is
configured as g_zero and fifo mode 3 is taken to enable double fifo.

In fact, the patch only removes the check for non-empty fifo before
loading data from new request into fifo since the check is not correct:

	-in double buffer case, fifo may accommodate more than one packet,
	even though it has contained one packet already and is non-empty

	-since last DMA is completed before calling musb_g_tx, it is sure
	that fifo may accommodate at least one packet

Without applying the patch, new requst enqueued from .complte may not
have a chance to be loaded into fifo, then will never be completed and
cause infinite hangs.

With the patch, on my beagle B5, test#6(queued bulk in) can be passed and
test result may go beyond 33Mbyte/s if musb is configured as g_zero and
fifo mode 3 is taken, follows the test command:

	#testusb -D DEV_NAME -c 1024 -t 6 -s 32768 -g 8   [1]

[1],
    -source of testusb : tools/usb/testusb.c under linux kernel;

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>

---
 drivers/usb/musb/musb_gadget.c |   12 ------------
 1 files changed, 0 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 550b397..e0bd1c1 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -506,18 +506,6 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 			/* ... or if not, then complete it. */
 			musb_g_giveback(musb_ep, request, 0);
 
-			/*
-			 * Kickstart next transfer if appropriate;
-			 * the packet that just completed might not
-			 * be transmitted for hours or days.
-			 * REVISIT for double buffering...
-			 * FIXME revisit for stalls too...
-			 */
-			musb_ep_select(mbase, epnum);
-			csr = musb_readw(epio, MUSB_TXCSR);
-			if (csr & MUSB_TXCSR_FIFONOTEMPTY)
-				return;
-
 			request = musb_ep->desc ? next_request(musb_ep) : NULL;
 			if (!request) {
 				DBG(4, "%s idle now\n",
-- 
1.6.2.5


^ permalink raw reply related	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2010-08-28  2:51 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-27 11:37 [PATCH 1/2] USB: musb-gadget: fix bulk IN infinite hangs in double buffer case tom.leiming
2010-08-27 13:40 ` Gadiyar, Anand
     [not found]   ` <5A47E75E594F054BAF48C5E4FC4B92AB0328C1CB42-/tLxBxkBPtCIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2010-08-27 15:01     ` Ming Lei
2010-08-27 15:06       ` Gadiyar, Anand
2010-08-27 20:27 ` Mike Frysinger
     [not found]   ` <201008271627.08137.vapier-aBrp7R+bbdUdnm+yROfE0A@public.gmane.org>
2010-08-28  2:51     ` Ming Lei

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox