From: Marc Zyngier <marc.zyngier@arm.com>
To: Benoit Cousson <bcousson@baylibre.com>,
Tony Lindgren <tony@atomide.com>, Nishanth Menon <nm@ti.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
Jason Cooper <jason@lakedaemon.net>,
Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org
Subject: [PATCH v6 6/7] DT: omap4/5: add binding for the wake-up generator
Date: Wed, 11 Mar 2015 15:43:48 +0000 [thread overview]
Message-ID: <1426088629-15377-7-git-send-email-marc.zyngier@arm.com> (raw)
In-Reply-To: <1426088629-15377-1-git-send-email-marc.zyngier@arm.com>
Add a binding for the OMAP4/5 wake-up generator, which acts as
an interrupt controller feeding into the GIC.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
.../interrupt-controller/ti,omap4-wugen-mpu | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
new file mode 100644
index 0000000..43effa0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
@@ -0,0 +1,33 @@
+TI OMAP4 Wake-up Generator
+
+All TI OMAP4/5 (and their derivatives) an interrupt controller that
+routes interrupts to the GIC, and also serves as a wakeup source. It
+is also referred to as "WUGEN-MPU", hence the name of the binding.
+
+Reguired properties:
+
+- compatible : should contain at least "ti,omap4-wugen-mpu" or
+ "ti,omap5-wugen-mpu"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value must be 3.
+- interrupt-parent : a phandle to the GIC these interrupts are routed
+ to.
+
+Notes:
+
+- Because this HW ultimately routes interrupts to the GIC, the
+ interrupt specifier must be that of the GIC.
+- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
+ are explicitly forbiden.
+
+Example:
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x48281000 0x1000>;
+ interrupt-parent = <&gic>;
+ };
--
2.1.4
next prev parent reply other threads:[~2015-03-11 15:44 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-11 15:43 [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use stacked domains Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 1/7] genirq: Add irqchip_set_wake_parent Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 2/7] irqchip: crossbar: convert dra7 crossbar to stacked domains Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 3/7] DT: update ti,irq-crossbar binding Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 4/7] irqchip: GIC: get rid of routable domain Marc Zyngier
2015-03-11 15:43 ` [PATCH v6 5/7] DT: arm,gic: kill arm,routable-irqs Marc Zyngier
2015-03-11 15:43 ` Marc Zyngier [this message]
2015-03-11 15:43 ` [PATCH v6 7/7] ARM: omap: convert wakeupgen to stacked domains Marc Zyngier
2015-03-13 15:40 ` [PATCH v6 0/7] irqchip: Move OMAP{4,5}/DRA7 to use " Tony Lindgren
2015-03-13 17:25 ` Jason Cooper
2015-03-13 17:38 ` Tony Lindgren
2015-03-13 17:49 ` Marc Zyngier
2015-03-15 1:22 ` Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426088629-15377-7-git-send-email-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=bcousson@baylibre.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
--cc=tglx@linutronix.de \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox