[PATCH 0/4] Enable USB3 for OMAP5

[PATCH 0/4] Enable USB3 for OMAP5

[Felipe Balbi]

Hi,

I have just tested all these patches on OMAP5 uEVM and it's
working fine.

| [1141397.137900] usb 10-2: USB disconnect, device number 3
| [1142023.549485] usb 10-2: new SuperSpeed USB device number 4 using xhci_hcd
| [1142024.185535] usb 10-2: Parent hub missing LPM exit latency info.  Power management will be impacted.
| [1142025.458738] usb 10-2: New USB device found, idVendor=0525, idProduct=a4a0
| [1142025.458744] usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
| [1142025.458748] usb 10-2: Product: Gadget Zero
| [1142025.458752] usb 10-2: Manufacturer: Linux 3.11.0-rc1-00068-g6df6cd3-dirty with dwc3-gadget
| [1142025.458755] usb 10-2: SerialNumber: 0123456789.0123456789.0123456789
| [1142025.866540] usbtest 10-2:3.0: Linux gadget zero
| [1142025.866547] usbtest 10-2:3.0: super-speed {control in/out bulk-in bulk-out} tests (+alt)

please consider applying them.

Benoit Cousson (1):
  arm: omap5: hwmod: add missing ocp2scp hwmod data

Felipe Balbi (3):
  arm: omap5: dts: fix reg property size
  arm: omap5: dts: add palmas-usb node
  arm: omap2plus_defconfig: enable dwc3 and dependencies

 arch/arm/boot/dts/omap5-uevm.dts           | 10 +++++++
 arch/arm/boot/dts/omap5.dtsi               |  9 +++---
 arch/arm/configs/omap2plus_defconfig       |  9 ++++++
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 ++++++++++++++++++++++++++++++
 4 files changed, 69 insertions(+), 4 deletions(-)

-- 
1.8.2.1

[PATCH 1/4] arm: omap5: dts: fix reg property size

[Felipe Balbi]

USB3 block has a 64KiB space, another 64KiB is
used for the wrapper.

Without this change, resource_size() will get
confused and driver won't probe because size
will be negative.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 arch/arm/boot/dts/omap5.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e643620..5c99f19 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -637,7 +637,7 @@
 		omap_dwc3@4a020000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
-			reg = <0x4a020000 0x1000>;
+			reg = <0x4a020000 0x10000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -645,7 +645,7 @@
 			ranges;
 			dwc3@4a030000 {
 				compatible = "synopsys,dwc3";
-				reg = <0x4a030000 0x1000>;
+				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 				usb-phy = <&usb2_phy>, <&usb3_phy>;
 				tx-fifo-resize;
-- 
1.8.2.1

[PATCH 2/4] arm: omap5: hwmod: add missing ocp2scp hwmod data

[Felipe Balbi]

From: Benoit Cousson <benoit.cousson@linaro.org>

without that hwmod data, USB3 will not in OMAP5 boards.

While at that, also fix DTS data to pass reg property,
otherwise driver won't probe.

Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 arch/arm/boot/dts/omap5.dtsi               |  3 +-
 arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 ++++++++++++++++++++++++++++++
 2 files changed, 47 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 5c99f19..4e41409 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -652,10 +652,11 @@
 			};
 		};
 
-		ocp2scp {
+		ocp2scp@4a080000 {
 			compatible = "ti,omap-ocp2scp";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			reg = <0x4a080000 0x20>;
 			ranges;
 			ti,hwmods = "ocp2scp1";
 			usb2_phy: usb2phy@4a084000 {
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index f37ae96..542eddd 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -1114,6 +1114,42 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
 };
 
 /*
+ * 'ocp2scp' class
+ * bridge to transform ocp interface protocol to scp (serial control port)
+ * protocol
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_ocp2scp_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = {
+	.name	= "ocp2scp",
+	.sysc	= &omap54xx_ocp2scp_sysc,
+};
+
+/* ocp2scp1 */
+static struct omap_hwmod omap54xx_ocp2scp1_hwmod = {
+	.name		= "ocp2scp1",
+	.class		= &omap54xx_ocp2scp_hwmod_class,
+	.clkdm_name	= "l3init_clkdm",
+	.main_clk	= "l4_root_clk_div",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET,
+			.context_offs = OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
  * 'timer' class
  * general purpose timer module with accurate 1ms tick
  * This class contains several variants: ['timer_1ms', 'timer']
@@ -1919,6 +1955,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_cfg -> ocp2scp1 */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = {
+	.master		= &omap54xx_l4_cfg_hwmod,
+	.slave		= &omap54xx_ocp2scp1_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l4_wkup -> timer1 */
 static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
 	.master		= &omap54xx_l4_wkup_hwmod,
@@ -2121,6 +2165,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l4_per__mmc4,
 	&omap54xx_l4_per__mmc5,
 	&omap54xx_l4_cfg__mpu,
+	&omap54xx_l4_cfg__ocp2scp1,
 	&omap54xx_l4_wkup__timer1,
 	&omap54xx_l4_per__timer2,
 	&omap54xx_l4_per__timer3,
-- 
1.8.2.1

Re: [PATCH 2/4] arm: omap5: hwmod: add missing ocp2scp hwmod data

[Kishon Vijay Abraham I]

Hi,

On Monday 15 July 2013 09:03 PM, Felipe Balbi wrote:
> From: Benoit Cousson <benoit.cousson@linaro.org>
> 
> without that hwmod data, USB3 will not in OMAP5 boards.
> 
> While at that, also fix DTS data to pass reg property,
> otherwise driver won't probe.
> 
> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> ---
>  arch/arm/boot/dts/omap5.dtsi               |  3 +-
>  arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 ++++++++++++++++++++++++++++++
>  2 files changed, 47 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 5c99f19..4e41409 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -652,10 +652,11 @@
>  			};
>  		};
>  
> -		ocp2scp {
> +		ocp2scp@4a080000 {

While at that, can we also name it ocp2scp1 since we have 3 instances of
ocp2scp and it'll conflict when we want to add it for SATA and PCIE.

Thanks
Kishon

Re: [PATCH 2/4] arm: omap5: hwmod: add missing ocp2scp hwmod data

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1233 bytes --]

On Mon, Jul 15, 2013 at 09:13:32PM +0530, Kishon Vijay Abraham I wrote:
> Hi,
> 
> On Monday 15 July 2013 09:03 PM, Felipe Balbi wrote:
> > From: Benoit Cousson <benoit.cousson@linaro.org>
> > 
> > without that hwmod data, USB3 will not in OMAP5 boards.
> > 
> > While at that, also fix DTS data to pass reg property,
> > otherwise driver won't probe.
> > 
> > Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
> > Signed-off-by: Felipe Balbi <balbi@ti.com>
> > ---
> >  arch/arm/boot/dts/omap5.dtsi               |  3 +-
> >  arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 ++++++++++++++++++++++++++++++
> >  2 files changed, 47 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> > index 5c99f19..4e41409 100644
> > --- a/arch/arm/boot/dts/omap5.dtsi
> > +++ b/arch/arm/boot/dts/omap5.dtsi
> > @@ -652,10 +652,11 @@
> >  			};
> >  		};
> >  
> > -		ocp2scp {
> > +		ocp2scp@4a080000 {
> 
> While at that, can we also name it ocp2scp1 since we have 3 instances of
> ocp2scp and it'll conflict when we want to add it for SATA and PCIE.

Tony/Benoit, you want that in same patch or as a separate patch
altogether ?

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 2/4] arm: omap5: hwmod: add missing ocp2scp hwmod data

[Tony Lindgren]

* Felipe Balbi <balbi@ti.com> [130715 08:52]:
> On Mon, Jul 15, 2013 at 09:13:32PM +0530, Kishon Vijay Abraham I wrote:
> > Hi,
> > 
> > On Monday 15 July 2013 09:03 PM, Felipe Balbi wrote:
> > > From: Benoit Cousson <benoit.cousson@linaro.org>
> > > 
> > > without that hwmod data, USB3 will not in OMAP5 boards.
> > > 
> > > While at that, also fix DTS data to pass reg property,
> > > otherwise driver won't probe.
> > > 
> > > Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
> > > Signed-off-by: Felipe Balbi <balbi@ti.com>
> > > ---
> > >  arch/arm/boot/dts/omap5.dtsi               |  3 +-
> > >  arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 ++++++++++++++++++++++++++++++
> > >  2 files changed, 47 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> > > index 5c99f19..4e41409 100644
> > > --- a/arch/arm/boot/dts/omap5.dtsi
> > > +++ b/arch/arm/boot/dts/omap5.dtsi
> > > @@ -652,10 +652,11 @@
> > >  			};
> > >  		};
> > >  
> > > -		ocp2scp {
> > > +		ocp2scp@4a080000 {
> > 
> > While at that, can we also name it ocp2scp1 since we have 3 instances of
> > ocp2scp and it'll conflict when we want to add it for SATA and PCIE.

Hmm the differentiatior is the name, so ocp2scp@4a800000 should
be enough and actually follows the naming standars where the name
should describe the type. I guess it could be just ocp@4a080000
or scp@4a080000 but I think it translates both ways, so ocp2scp
is probably pretty good.
 
> Tony/Benoit, you want that in same patch or as a separate patch
> altogether ?

Please do the .dts changes in separate patches as they should
get merged separately for most part.

Regards,

Tony

[PATCH 3/4] arm: omap5: dts: add palmas-usb node

[Felipe Balbi]

Without this node, there will be no palmas
driver to notify dwc3 that a cable has
been connected and, without that, dwc3
will never initialize.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 arch/arm/boot/dts/omap5-uevm.dts | 10 ++++++++++
 arch/arm/boot/dts/omap5.dtsi     |  2 +-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 08b7267..badceb8 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -272,6 +272,11 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb";
+			ti,wakeup;
+		};
+
 		palmas_pmic {
 			compatible = "ti,palmas-pmic";
 			interrupt-parent = <&palmas>;
@@ -450,6 +455,11 @@
 	phys = <0 &hsusb2_phy &hsusb3_phy>;
 };
 
+&usb3 {
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_reg>;
+};
+
 &mcspi1 {
 
 };
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 4e41409..1659246 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -634,7 +634,7 @@
 			ti,type = <2>;
 		};
 
-		omap_dwc3@4a020000 {
+		usb3: omap_dwc3@4a020000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
 			reg = <0x4a020000 0x10000>;
-- 
1.8.2.1

[PATCH 4/4] arm: omap2plus_defconfig: enable dwc3 and dependencies

[Felipe Balbi]

DWC3 enables USB3 functionality for OMAP5 boards,
it's safe to enable those drivers in omap2plus_defconfig.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 arch/arm/configs/omap2plus_defconfig | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 5339e6a..aed3cce 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -81,6 +81,7 @@ CONFIG_CMA=y
 CONFIG_CONNECTOR=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
@@ -167,9 +168,11 @@ CONFIG_THERMAL_GOV_USER_SPACE=y
 CONFIG_CPU_THERMAL=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
+CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
@@ -222,10 +225,14 @@ CONFIG_USB_MON=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_DWC3=m
+CONFIG_USB_DWC3_OMAP=m
 CONFIG_USB_TEST=y
 CONFIG_USB_PHY=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_GADGET=y
+CONFIG_OMAP_USB2=y
+CONFIG_OMAP_USB3=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
@@ -258,6 +265,8 @@ CONFIG_TI_THERMAL=y
 CONFIG_OMAP4_THERMAL=y
 CONFIG_OMAP5_THERMAL=y
 CONFIG_DRA752_THERMAL=y
+CONFIG_EXTCON=y
+CONFIG_EXTCON_PALMAS=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-- 
1.8.2.1