Re: [PATCH] ARM: dts: Revert disabling of smc91x for n900

["Pali Rohár" <pali.rohar@gmail.com>]

[-- Attachment #1: Type: Text/Plain, Size: 1236 bytes --]

Just to note that smc91x ethernet support is also in qemu n900 
emulation. Later I will try if it work with upstream kernel...

On Tuesday 06 January 2015 00:02:29 Tony Lindgren wrote:
> Revert "ARM: dts: Disable smc91x on n900 until bootloader
> dependency is removed". We've now fixed the issues that
> caused problems with uninitialized hardware depending on
> the bootloader version. Mostly things got fixed with
> the following commits:
> 
> 9a894953a97b ("ARM: dts: Fix bootloader version dependencies
> by muxing n900 smc91x pins") 7d2911c43815 ("net: smc91x: Fix
> gpios for device tree based booting")
> 
> Note that this only affects the early development boards
> with Ethernet that we still have in a few automated boot
> test systems.
> 
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> 
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -702,9 +702,6 @@
> 
>  	ethernet@gpmc {
>  		compatible = "smsc,lan91c94";
> -
> -		status = "disabled";
> -
>  		interrupt-parent = <&gpio2>;
>  		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;	/* gpio54 */
>  		reg = <1 0x300 0xf>;		/* 16 byte IO range at offset 
0x300
> */

-- 
Pali Rohár
pali.rohar@gmail.com

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]