Re: [PATCH] ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1747 bytes --]

On Tue, Mar 24, 2015 at 11:57:54AM -0500, Nishanth Menon wrote:
> On 11:44-20150324, Felipe Balbi wrote:
> > On Tue, Mar 24, 2015 at 09:26:48AM -0500, Nishanth Menon wrote:
> > > On 12:19-20150324, Roger Quadros wrote:
> > > > We need to enable EXTCON_USB_GPIO_USB and not
> > > > EXTCON_GPIO_USB.
> > > > 
> > > > Fixes: c08a54c0ebeb ("ARM: omap2plus_defconfig: Enable EXTCON_GPIO_USB")
> > > > 
> > > > Reported-by: Nishant Menon <nm@ti.com>
> > > > Signed-off-by: Roger Quadros <rogerq@ti.com>
> > > > ---
> > > >  arch/arm/configs/omap2plus_defconfig | 2 +-
> > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > 
> > > > diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
> > > > index 04b4c8e..daf9412 100644
> > > > --- a/arch/arm/configs/omap2plus_defconfig
> > > > +++ b/arch/arm/configs/omap2plus_defconfig
> > > > @@ -391,7 +391,7 @@ CONFIG_TI_EDMA=y
> > > >  CONFIG_DMA_OMAP=y
> > > >  # CONFIG_IOMMU_SUPPORT is not set
> > > >  CONFIG_EXTCON=m
> > > > -CONFIG_EXTCON_GPIO=m
> > > > +CONFIG_EXTCON_USB_GPIO=m
> > > >  CONFIG_EXTCON_PALMAS=m
> > > >  CONFIG_TI_EMIF=m
> > > >  CONFIG_PWM=y
> > > > -- 
> > > > 2.1.0
> > > 
> > > Yep and it finally works! Yipiee!!
> > > http://pastebin.ubuntu.com/10669565/
> > 
> > I don't see the peripheral side IRQ in /proc/interrupts. What's going
> > on? Can you load g_zero or g_mass_storage and verify peripheral side
> > also works ?
> my board is remote atm and does not have the usb peripheral cable hooked in.
> However, I did load g_zero and looks like 73 is registered.

thanks, that should be enough :-)

Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]