* [PATCH AUTOSEL 5.14 15/32] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool
[not found] <20210911131149.284397-1-sashal@kernel.org>
@ 2021-09-11 13:11 ` Sasha Levin
2021-09-11 13:11 ` [PATCH AUTOSEL 5.14 17/32] PCI: j721e: Add PCIe support for J7200 Sasha Levin
2021-09-11 13:11 ` [PATCH AUTOSEL 5.14 18/32] PCI: j721e: Add PCIe support for AM64 Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2021-09-11 13:11 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Kishon Vijay Abraham I, Bjorn Helgaas, Lorenzo Pieralisi,
Sasha Levin, linux-omap, linux-pci, linux-arm-kernel
From: Kishon Vijay Abraham I <kishon@ti.com>
[ Upstream commit f4455748b2126a9ba2bcc9cfb2fbcaa08de29bb2 ]
No functional change. As we are intending to add additional 1-bit
members in struct j721e_pcie_data/struct cdns_pcie_rc, use bitfields
instead of bool since it takes less space. As discussed in [1],
the preference is to use bitfileds instead of bool inside structures.
[1] -> https://lore.kernel.org/linux-fsdevel/CA+55aFzKQ6Pj18TB8p4Yr0M4t+S+BsiHH=BJNmn=76-NcjTj-g@mail.gmail.com/
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20210811123336.31357-2-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/controller/cadence/pci-j721e.c | 2 +-
drivers/pci/controller/cadence/pcie-cadence.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 35e61048e133..0c5813b230b4 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -66,7 +66,7 @@ enum j721e_pcie_mode {
struct j721e_pcie_data {
enum j721e_pcie_mode mode;
- bool quirk_retrain_flag;
+ unsigned int quirk_retrain_flag:1;
};
static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 30db2d68c17a..bc27d126f239 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -303,7 +303,7 @@ struct cdns_pcie_rc {
u32 vendor_id;
u32 device_id;
bool avail_ib_bar[CDNS_PCIE_RP_MAX_IB];
- bool quirk_retrain_flag;
+ unsigned int quirk_retrain_flag:1;
};
/**
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH AUTOSEL 5.14 17/32] PCI: j721e: Add PCIe support for J7200
[not found] <20210911131149.284397-1-sashal@kernel.org>
2021-09-11 13:11 ` [PATCH AUTOSEL 5.14 15/32] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool Sasha Levin
@ 2021-09-11 13:11 ` Sasha Levin
2021-09-11 13:11 ` [PATCH AUTOSEL 5.14 18/32] PCI: j721e: Add PCIe support for AM64 Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2021-09-11 13:11 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Kishon Vijay Abraham I, Lorenzo Pieralisi, Sasha Levin,
linux-omap, linux-pci, linux-arm-kernel
From: Kishon Vijay Abraham I <kishon@ti.com>
[ Upstream commit f1de58802f0fff364cf49f5e47d1be744baa434f ]
J7200 has the same PCIe IP as in J721E with minor changes in the
wrapper. J7200 allows byte access of bridge configuration space
registers and the register field for LINK_DOWN interrupt is different.
J7200 also requires "quirk_detect_quiet_flag" to be set. Configure these
changes as part of driver data applicable only to J7200.
Link: https://lore.kernel.org/r/20210811123336.31357-4-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/controller/cadence/pci-j721e.c | 40 +++++++++++++++++++---
1 file changed, 36 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 0c5813b230b4..10b13b728284 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -27,6 +27,7 @@
#define STATUS_REG_SYS_2 0x508
#define STATUS_CLR_REG_SYS_2 0x708
#define LINK_DOWN BIT(1)
+#define J7200_LINK_DOWN BIT(10)
#define J721E_PCIE_USER_CMD_STATUS 0x4
#define LINK_TRAINING_ENABLE BIT(0)
@@ -57,6 +58,7 @@ struct j721e_pcie {
struct cdns_pcie *cdns_pcie;
void __iomem *user_cfg_base;
void __iomem *intd_cfg_base;
+ u32 linkdown_irq_regfield;
};
enum j721e_pcie_mode {
@@ -67,6 +69,9 @@ enum j721e_pcie_mode {
struct j721e_pcie_data {
enum j721e_pcie_mode mode;
unsigned int quirk_retrain_flag:1;
+ unsigned int quirk_detect_quiet_flag:1;
+ u32 linkdown_irq_regfield;
+ unsigned int byte_access_allowed:1;
};
static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
@@ -98,12 +103,12 @@ static irqreturn_t j721e_pcie_link_irq_handler(int irq, void *priv)
u32 reg;
reg = j721e_pcie_intd_readl(pcie, STATUS_REG_SYS_2);
- if (!(reg & LINK_DOWN))
+ if (!(reg & pcie->linkdown_irq_regfield))
return IRQ_NONE;
dev_err(dev, "LINK DOWN!\n");
- j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, LINK_DOWN);
+ j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, pcie->linkdown_irq_regfield);
return IRQ_HANDLED;
}
@@ -112,7 +117,7 @@ static void j721e_pcie_config_link_irq(struct j721e_pcie *pcie)
u32 reg;
reg = j721e_pcie_intd_readl(pcie, ENABLE_REG_SYS_2);
- reg |= LINK_DOWN;
+ reg |= pcie->linkdown_irq_regfield;
j721e_pcie_intd_writel(pcie, ENABLE_REG_SYS_2, reg);
}
@@ -284,10 +289,25 @@ static struct pci_ops cdns_ti_pcie_host_ops = {
static const struct j721e_pcie_data j721e_pcie_rc_data = {
.mode = PCI_MODE_RC,
.quirk_retrain_flag = true,
+ .byte_access_allowed = false,
+ .linkdown_irq_regfield = LINK_DOWN,
};
static const struct j721e_pcie_data j721e_pcie_ep_data = {
.mode = PCI_MODE_EP,
+ .linkdown_irq_regfield = LINK_DOWN,
+};
+
+static const struct j721e_pcie_data j7200_pcie_rc_data = {
+ .mode = PCI_MODE_RC,
+ .quirk_detect_quiet_flag = true,
+ .linkdown_irq_regfield = J7200_LINK_DOWN,
+ .byte_access_allowed = true,
+};
+
+static const struct j721e_pcie_data j7200_pcie_ep_data = {
+ .mode = PCI_MODE_EP,
+ .quirk_detect_quiet_flag = true,
};
static const struct of_device_id of_j721e_pcie_match[] = {
@@ -299,6 +319,14 @@ static const struct of_device_id of_j721e_pcie_match[] = {
.compatible = "ti,j721e-pcie-ep",
.data = &j721e_pcie_ep_data,
},
+ {
+ .compatible = "ti,j7200-pcie-host",
+ .data = &j7200_pcie_rc_data,
+ },
+ {
+ .compatible = "ti,j7200-pcie-ep",
+ .data = &j7200_pcie_ep_data,
+ },
{},
};
@@ -332,6 +360,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
pcie->dev = dev;
pcie->mode = mode;
+ pcie->linkdown_irq_regfield = data->linkdown_irq_regfield;
base = devm_platform_ioremap_resource_byname(pdev, "intd_cfg");
if (IS_ERR(base))
@@ -391,9 +420,11 @@ static int j721e_pcie_probe(struct platform_device *pdev)
goto err_get_sync;
}
- bridge->ops = &cdns_ti_pcie_host_ops;
+ if (!data->byte_access_allowed)
+ bridge->ops = &cdns_ti_pcie_host_ops;
rc = pci_host_bridge_priv(bridge);
rc->quirk_retrain_flag = data->quirk_retrain_flag;
+ rc->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
cdns_pcie = &rc->pcie;
cdns_pcie->dev = dev;
@@ -459,6 +490,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
ret = -ENOMEM;
goto err_get_sync;
}
+ ep->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
cdns_pcie = &ep->pcie;
cdns_pcie->dev = dev;
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH AUTOSEL 5.14 18/32] PCI: j721e: Add PCIe support for AM64
[not found] <20210911131149.284397-1-sashal@kernel.org>
2021-09-11 13:11 ` [PATCH AUTOSEL 5.14 15/32] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool Sasha Levin
2021-09-11 13:11 ` [PATCH AUTOSEL 5.14 17/32] PCI: j721e: Add PCIe support for J7200 Sasha Levin
@ 2021-09-11 13:11 ` Sasha Levin
2 siblings, 0 replies; 3+ messages in thread
From: Sasha Levin @ 2021-09-11 13:11 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Kishon Vijay Abraham I, Lorenzo Pieralisi, Sasha Levin,
linux-omap, linux-pci, linux-arm-kernel
From: Kishon Vijay Abraham I <kishon@ti.com>
[ Upstream commit c8a375a8e15ac31293d7fda08008d6da8f5df3db ]
AM64 has the same PCIe IP as in J7200 with certain erratas not
applicable (quirk_detect_quiet_flag). Add support for "ti,am64-pcie-host"
compatible and "ti,am64-pcie-ep" compatible that is specific to AM64.
Link: https://lore.kernel.org/r/20210811123336.31357-5-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pci/controller/cadence/pci-j721e.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 10b13b728284..ffb176d288cd 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -310,6 +310,17 @@ static const struct j721e_pcie_data j7200_pcie_ep_data = {
.quirk_detect_quiet_flag = true,
};
+static const struct j721e_pcie_data am64_pcie_rc_data = {
+ .mode = PCI_MODE_RC,
+ .linkdown_irq_regfield = J7200_LINK_DOWN,
+ .byte_access_allowed = true,
+};
+
+static const struct j721e_pcie_data am64_pcie_ep_data = {
+ .mode = PCI_MODE_EP,
+ .linkdown_irq_regfield = J7200_LINK_DOWN,
+};
+
static const struct of_device_id of_j721e_pcie_match[] = {
{
.compatible = "ti,j721e-pcie-host",
@@ -327,6 +338,14 @@ static const struct of_device_id of_j721e_pcie_match[] = {
.compatible = "ti,j7200-pcie-ep",
.data = &j7200_pcie_ep_data,
},
+ {
+ .compatible = "ti,am64-pcie-host",
+ .data = &am64_pcie_rc_data,
+ },
+ {
+ .compatible = "ti,am64-pcie-ep",
+ .data = &am64_pcie_ep_data,
+ },
{},
};
--
2.30.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-09-11 13:13 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20210911131149.284397-1-sashal@kernel.org>
2021-09-11 13:11 ` [PATCH AUTOSEL 5.14 15/32] PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool Sasha Levin
2021-09-11 13:11 ` [PATCH AUTOSEL 5.14 17/32] PCI: j721e: Add PCIe support for J7200 Sasha Levin
2021-09-11 13:11 ` [PATCH AUTOSEL 5.14 18/32] PCI: j721e: Add PCIe support for AM64 Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox