Linux on ARM based TI OMAP SoCs
 help / color / mirror / Atom feed
* [PATCH v3 0/3] mfd: twl: Add clock for TWL6030
@ 2024-10-05 12:47 Andreas Kemnade
  2024-10-05 12:47 ` [PATCH v3 1/3] mfd: twl-core: Add a clock subdevice for the TWL6030 Andreas Kemnade
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Andreas Kemnade @ 2024-10-05 12:47 UTC (permalink / raw)
  To: Tony Lindgren, Michael Turquette, Aaro Koskinen, Lee Jones,
	Roger Quadros, linux-clk, linux-kernel, Kevin Hilman, linux-omap,
	Stephen Boyd
  Cc: Andreas Kemnade

Previously the clock support for only implemented for TWL6032 so add
it also for the TWL6030. There are devices out there where especially
WLAN only works if these clocks are enabled by some patched U-Boot.
This allows to explicitly specify the clock requirements.

Changes in V3:
- use type enum in driver_data and twl_clock_info
- revert back to store device instead of platform_device

Changes in V2:
- cleanup some defines
- no separate ops for 6030
- remove is_prepared()
- update Kconfig

Andreas Kemnade (3):
  mfd: twl-core: Add a clock subdevice for the TWL6030
  clk: twl: remove is_prepared
  clk: twl: add TWL6030 support

 drivers/clk/Kconfig    |  2 +-
 drivers/clk/clk-twl.c  | 69 ++++++++++++++++++++++++++----------------
 drivers/mfd/twl-core.c | 32 ++++++++++++++------
 3 files changed, 66 insertions(+), 37 deletions(-)

-- 
2.39.5


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2024-10-05 12:47 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-10-05 12:47 [PATCH v3 0/3] mfd: twl: Add clock for TWL6030 Andreas Kemnade
2024-10-05 12:47 ` [PATCH v3 1/3] mfd: twl-core: Add a clock subdevice for the TWL6030 Andreas Kemnade
2024-10-05 12:47 ` [PATCH v3 2/3] clk: twl: remove is_prepared Andreas Kemnade
2024-10-05 12:47 ` [PATCH v3 3/3] clk: twl: add TWL6030 support Andreas Kemnade

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox