* [PATCH] fbdev: fix typos in comments
@ 2026-09-04 11:13 Hemanth Selam
0 siblings, 0 replies; only message in thread
From: Hemanth Selam @ 2026-09-04 11:13 UTC (permalink / raw)
To: Helge Deller, Benjamin Herrenschmidt, Peter Jones,
Florian Tobias Schandinat
Cc: linux-kernel, linux-fbdev, dri-devel, linux-omap
Fix typos in comments, reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
---
drivers/video/fbdev/aty/aty128fb.c | 2 +-
drivers/video/fbdev/aty/atyfb_base.c | 4 ++--
drivers/video/fbdev/aty/mach64_cursor.c | 2 +-
drivers/video/fbdev/aty/radeon_base.c | 4 ++--
drivers/video/fbdev/aty/radeon_monitor.c | 4 ++--
drivers/video/fbdev/aty/radeonfb.h | 2 +-
drivers/video/fbdev/au1100fb.c | 2 +-
drivers/video/fbdev/efifb.c | 4 ++--
drivers/video/fbdev/grvga.c | 2 +-
drivers/video/fbdev/kyro/STG4000OverlayDevice.c | 2 +-
drivers/video/fbdev/maxinefb.c | 2 +-
drivers/video/fbdev/mmp/core.c | 2 +-
drivers/video/fbdev/mmp/hw/mmp_ctrl.c | 4 ++--
drivers/video/fbdev/mmp/hw/mmp_ctrl.h | 4 ++--
drivers/video/fbdev/mmp/hw/mmp_spi.c | 2 +-
drivers/video/fbdev/ocfb.c | 2 +-
drivers/video/fbdev/omap2/omapfb/dss/dispc.c | 4 ++--
drivers/video/fbdev/pm2fb.c | 2 +-
drivers/video/fbdev/skeletonfb.c | 6 +++---
drivers/video/fbdev/sstfb.c | 2 +-
drivers/video/fbdev/tgafb.c | 6 +++---
drivers/video/fbdev/tridentfb.c | 2 +-
drivers/video/fbdev/via/dvi.c | 6 +++---
drivers/video/fbdev/via/hw.c | 2 +-
drivers/video/fbdev/via/viafbdev.c | 4 ++--
drivers/video/sticore.c | 2 +-
include/video/mmp_disp.h | 6 +++---
27 files changed, 43 insertions(+), 43 deletions(-)
diff --git a/drivers/video/fbdev/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c
index c349a1711ff5..6f71c3c6307e 100644
--- a/drivers/video/fbdev/aty/aty128fb.c
+++ b/drivers/video/fbdev/aty/aty128fb.c
@@ -753,7 +753,7 @@ static u32 depth_to_dst(u32 depth)
}
/*
- * PLL informations retreival
+ * PLL information retreival
*/
diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index 97cc8b6a9361..b1f33642e722 100644
--- a/drivers/video/fbdev/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
@@ -2966,7 +2966,7 @@ static int atyfb_setup_sparc(struct pci_dev *pdev, struct fb_info *info,
/*
* Figure mmap addresses from PCI config space.
- * Split Framebuffer in big- and little-endian halfs.
+ * Split Framebuffer in big- and little-endian halves.
*/
for (i = 0; i < 6 && pdev->resource[i].start; i++)
/* nothing */ ;
@@ -3387,7 +3387,7 @@ static int init_from_bios(struct atyfb_par *par)
PRINTKI("Mach64 BIOS is located at %x, mapped at %x.\n", rom_addr, bios_base);
- /* check for frequncy table */
+ /* check for frequency table */
bios_ptr = (u8*)bios_base;
rom_table_offset = (u16)(bios_ptr[0x48] | (bios_ptr[0x49] << 8));
freq_table_offset = bios_ptr[rom_table_offset + 16] | (bios_ptr[rom_table_offset + 17] << 8);
diff --git a/drivers/video/fbdev/aty/mach64_cursor.c b/drivers/video/fbdev/aty/mach64_cursor.c
index e826cb7dd55d..60abb9666395 100644
--- a/drivers/video/fbdev/aty/mach64_cursor.c
+++ b/drivers/video/fbdev/aty/mach64_cursor.c
@@ -43,7 +43,7 @@
*
*
* The Screen position of the top left corner of the displayed
- * cursor is specificed by CURS_HORZ_VERT_POSN. Care must be taken
+ * cursor is specified by CURS_HORZ_VERT_POSN. Care must be taken
* when the cursor hot spot is not the top left corner and the
* physical cursor position becomes negative. It will be displayed
* if either the horizontal or vertical cursor position is negative
diff --git a/drivers/video/fbdev/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
index b6b058cee751..387bc5f96765 100644
--- a/drivers/video/fbdev/aty/radeon_base.c
+++ b/drivers/video/fbdev/aty/radeon_base.c
@@ -779,7 +779,7 @@ static void radeon_get_pllinfo(struct radeonfb_info *rinfo)
#endif /* CONFIG_PPC || CONFIG_SPARC */
/*
- * Check out if we have an X86 which gave us some PLL informations
+ * Check out if we have an X86 which gave us some PLL information
* and if yes, retrieve them
*/
if (!force_measure_pll && rinfo->bios_seg) {
@@ -2407,7 +2407,7 @@ static int radeonfb_pci_register(struct pci_dev *pdev,
if (rinfo->bios_seg == NULL && rinfo->is_mobility)
radeon_map_ROM(rinfo, pdev);
- /* Get informations about the board's PLL */
+ /* Get information about the board's PLL */
radeon_get_pllinfo(rinfo);
#ifdef CONFIG_FB_RADEON_I2C
diff --git a/drivers/video/fbdev/aty/radeon_monitor.c b/drivers/video/fbdev/aty/radeon_monitor.c
index 621d13a1a1d9..775888c43ef0 100644
--- a/drivers/video/fbdev/aty/radeon_monitor.c
+++ b/drivers/video/fbdev/aty/radeon_monitor.c
@@ -58,7 +58,7 @@ static char *radeon_get_mon_name(int type)
#if defined(CONFIG_PPC) || defined(CONFIG_SPARC)
/*
- * Try to find monitor informations & EDID data out of the Open Firmware
+ * Try to find monitor information & EDID data out of the Open Firmware
* device-tree. This also contains some "hacks" to work around a few machine
* models with broken OF probing by hard-coding known EDIDs for some Mac
* laptops internal LVDS panel. (XXX: not done yet)
@@ -248,7 +248,7 @@ static int radeon_get_panel_info_BIOS(struct radeonfb_info *rinfo)
return 0;
}
-/* Try to extract the connector informations from the BIOS. This
+/* Try to extract the connector information from the BIOS. This
* doesn't quite work yet, but it's output is still useful for
* debugging
*/
diff --git a/drivers/video/fbdev/aty/radeonfb.h b/drivers/video/fbdev/aty/radeonfb.h
index 91d81b576231..0781caea2c71 100644
--- a/drivers/video/fbdev/aty/radeonfb.h
+++ b/drivers/video/fbdev/aty/radeonfb.h
@@ -148,7 +148,7 @@ struct pll_info {
* This structure contains the various registers manipulated by this
* driver for setting or restoring a mode. It's mostly copied from
* XFree's RADEONSaveRec structure. A few chip settings might still be
- * tweaked without beeing reflected or saved in these registers though
+ * tweaked without being reflected or saved in these registers though
*/
struct radeon_regs {
/* Common registers */
diff --git a/drivers/video/fbdev/au1100fb.c b/drivers/video/fbdev/au1100fb.c
index 39f86ffb1ae3..01c836cb5205 100644
--- a/drivers/video/fbdev/au1100fb.c
+++ b/drivers/video/fbdev/au1100fb.c
@@ -528,7 +528,7 @@ static int au1100fb_setmode(struct au1100fb_device *fbdev)
if (!info->var.rotate || (info->var.rotate == 180)) {
words *= info->var.yres_virtual;
if (info->var.rotate /* 180 */) {
- words -= (words % 8); /* should be divisable by 8 */
+ words -= (words % 8); /* should be divisible by 8 */
}
}
fbdev->regs->lcd_words = LCD_WRD_WRDS_N(words);
diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
index ad8dec7807c3..e1c764854004 100644
--- a/drivers/video/fbdev/efifb.c
+++ b/drivers/video/fbdev/efifb.c
@@ -97,7 +97,7 @@ static int efifb_setcolreg(unsigned regno, unsigned red, unsigned green,
}
/*
- * If fbcon deffered console takeover is configured, the intent is for the
+ * If fbcon deferred console takeover is configured, the intent is for the
* framebuffer to show the boot graphics (e.g. vendor logo) until there is some
* (error) message to display. But the boot graphics may have been destroyed by
* e.g. option ROM output, detect this and restore the boot graphics.
@@ -421,7 +421,7 @@ static int efifb_probe(struct platform_device *dev)
size_vmode = efifb_defined.yres * efifb_fix.line_length;
/* size_total -- all video memory we have. Used for
- * entries, ressource allocation and bounds
+ * entries, resource allocation and bounds
* checking. */
size_total = si->lfb_size;
if (size_total < size_vmode)
diff --git a/drivers/video/fbdev/grvga.c b/drivers/video/fbdev/grvga.c
index a6594bcd74e8..771d9491b49e 100644
--- a/drivers/video/fbdev/grvga.c
+++ b/drivers/video/fbdev/grvga.c
@@ -432,7 +432,7 @@ static int grvga_probe(struct platform_device *dev)
retval = -ENOMEM;
goto dealloc_cmap;
}
- } else { /* Allocate frambuffer memory */
+ } else { /* Allocate framebuffer memory */
unsigned long page;
diff --git a/drivers/video/fbdev/kyro/STG4000OverlayDevice.c b/drivers/video/fbdev/kyro/STG4000OverlayDevice.c
index 9fde0e3b69ec..a54a8a9197e5 100644
--- a/drivers/video/fbdev/kyro/STG4000OverlayDevice.c
+++ b/drivers/video/fbdev/kyro/STG4000OverlayDevice.c
@@ -60,7 +60,7 @@ typedef struct _OVRL_SRC_DEST {
u32 ulDstX2;
u32 ulDstY2;
- /*clipped pixel pos of source data within buffer thses need to be 128 bit word aligned */
+ /*clipped pixel pos of source data within buffer these need to be 128 bit word aligned */
u32 ulSrcX1;
u32 ulSrcY1;
u32 ulSrcX2;
diff --git a/drivers/video/fbdev/maxinefb.c b/drivers/video/fbdev/maxinefb.c
index 67d4bd881041..88aec13a98fb 100644
--- a/drivers/video/fbdev/maxinefb.c
+++ b/drivers/video/fbdev/maxinefb.c
@@ -98,7 +98,7 @@ static int maxinefb_setcolreg(unsigned regno, unsigned red, unsigned green,
return 1;
red >>= 8; /* The cmap fields are 16 bits */
- green >>= 8; /* wide, but the harware colormap */
+ green >>= 8; /* wide, but the hardware colormap */
blue >>= 8; /* registers are only 8 bits wide */
hw_colorvalue = (blue << 16) + (green << 8) + (red);
diff --git a/drivers/video/fbdev/mmp/core.c b/drivers/video/fbdev/mmp/core.c
index 3c35b0a3ea09..9d4fda2fc83f 100644
--- a/drivers/video/fbdev/mmp/core.c
+++ b/drivers/video/fbdev/mmp/core.c
@@ -65,7 +65,7 @@ static DEFINE_MUTEX(disp_lock);
* @p: panel to be registered
*
* this function provides interface for panel drivers to register panel
- * to panel_list and connect to path which matchs panel->plat_path_name.
+ * to panel_list and connect to path which matches panel->plat_path_name.
* no error returns when no matching path is found as path register after
* panel register is permitted.
*/
diff --git a/drivers/video/fbdev/mmp/hw/mmp_ctrl.c b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
index 2c457da67a9f..3db608e5aef1 100644
--- a/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
+++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
@@ -325,7 +325,7 @@ static void ctrl_set_default(struct mmphw_ctrl *ctrl)
u32 tmp, irq_mask;
/*
- * LCD Global control(LCD_TOP_CTRL) should be configed before
+ * LCD Global control(LCD_TOP_CTRL) should be configured before
* any other LCD registers read/write, or there maybe issues.
*/
tmp = readl_relaxed(ctrl->reg_base + LCD_TOP_CTRL);
@@ -521,7 +521,7 @@ static int mmphw_probe(struct platform_device *pdev)
/* init global regs */
ctrl_set_default(ctrl);
- /* init pathes from machine info and register them */
+ /* init paths from machine info and register them */
for (i = 0; i < ctrl->path_num; i++) {
/* get from config and machine info */
path_plat = &ctrl->path_plats[i];
diff --git a/drivers/video/fbdev/mmp/hw/mmp_ctrl.h b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
index 719b99a9bc77..80aefe5cace1 100644
--- a/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
+++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
@@ -1404,7 +1404,7 @@ struct mmphw_ctrl {
int status;
struct mutex access_ok;
- /*pathes*/
+ /*paths*/
int path_num;
struct mmphw_path_plat path_plats[] __counted_by(path_num);
};
@@ -1434,7 +1434,7 @@ static inline void __iomem *ctrl_regs(struct mmp_path *path)
return path_to_ctrl(path)->reg_base;
}
-/* path regs, for regs symmetrical for both pathes */
+/* path regs, for regs symmetrical for both paths */
static inline struct lcd_regs *path_regs(struct mmp_path *path)
{
if (path->id == PATH_PN)
diff --git a/drivers/video/fbdev/mmp/hw/mmp_spi.c b/drivers/video/fbdev/mmp/hw/mmp_spi.c
index 3f253f4271ac..8e6e8be441d2 100644
--- a/drivers/video/fbdev/mmp/hw/mmp_spi.c
+++ b/drivers/video/fbdev/mmp/hw/mmp_spi.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* linux/drivers/video/mmp/hw/mmp_spi.c
- * using the spi in LCD controler for commands send
+ * using the spi in LCD controller for commands send
*
* Copyright (C) 2012 Marvell Technology Group Ltd.
* Authors: Guoqing Li <ligq@marvell.com>
diff --git a/drivers/video/fbdev/ocfb.c b/drivers/video/fbdev/ocfb.c
index 893888260c21..c16e907e5710 100644
--- a/drivers/video/fbdev/ocfb.c
+++ b/drivers/video/fbdev/ocfb.c
@@ -115,7 +115,7 @@ static int ocfb_setupfb(struct ocfb_dev *fbdev)
fbdev->little_endian = 0;
ocfb_writereg(fbdev, OCFB_VBARA, fbdev->fb_phys);
- /* Detect endianess */
+ /* Detect endianness */
if (ocfb_readreg(fbdev, OCFB_VBARA) != fbdev->fb_phys) {
fbdev->little_endian = 1;
ocfb_writereg(fbdev, OCFB_VBARA, fbdev->fb_phys);
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dispc.c b/drivers/video/fbdev/omap2/omapfb/dss/dispc.c
index 1dc70c96d813..cbe3cc545131 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/dispc.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/dispc.c
@@ -2119,7 +2119,7 @@ static int check_horiz_timing_omap3(unsigned long pclk, unsigned long lclk,
/*
* Pixel data should be prepared before visible display point starts.
- * So, atleast DS-2 lines must have already been fetched by DISPC
+ * So, at least DS-2 lines must have already been fetched by DISPC
* during nonactive - pos_x period.
*/
val = div_u64((u64)(nonactive - pos_x) * lclk, pclk);
@@ -2130,7 +2130,7 @@ static int check_horiz_timing_omap3(unsigned long pclk, unsigned long lclk,
/*
* All lines need to be refilled during the nonactive period of which
- * only one line can be loaded during the active period. So, atleast
+ * only one line can be loaded during the active period. So, at least
* DS - 1 lines should be loaded during nonactive period.
*/
val = div_u64((u64)nonactive * lclk, pclk);
diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c
index 058075a34c5d..f287c9059489 100644
--- a/drivers/video/fbdev/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
@@ -428,7 +428,7 @@ static void set_aperture(struct pm2fb_par *p, u32 depth)
}
#endif
- /* We don't use aperture two, so this may be superflous */
+ /* We don't use aperture two, so this may be superfluous */
pm2_WR(p, PM2R_APERTURE_TWO, PM2F_APERTURE_STANDARD);
}
diff --git a/drivers/video/fbdev/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c
index 7e98850d9bde..bbfbf55cdab8 100644
--- a/drivers/video/fbdev/skeletonfb.c
+++ b/drivers/video/fbdev/skeletonfb.c
@@ -478,7 +478,7 @@ static int xxxfb_blank(int blank_mode, struct fb_info *info)
/**
* xxxfb_fillrect - REQUIRED function. Can use generic routines if
- * non acclerated hardware and packed pixel based.
+ * non accelerated hardware and packed pixel based.
* Draws a rectangle on the screen.
*
* @info: frame buffer structure that represents a single frame buffer
@@ -505,7 +505,7 @@ void xxxfb_fillrect(struct fb_info *p, const struct fb_fillrect *region)
/**
* xxxfb_copyarea - REQUIRED function. Can use generic routines if
- * non acclerated hardware and packed pixel based.
+ * non accelerated hardware and packed pixel based.
* Copies one area of the screen to another area.
*
* @info: frame buffer structure that represents a single frame buffer
@@ -530,7 +530,7 @@ void xxxfb_copyarea(struct fb_info *p, const struct fb_copyarea *area)
/**
* xxxfb_imageblit - REQUIRED function. Can use generic routines if
- * non acclerated hardware and packed pixel based.
+ * non accelerated hardware and packed pixel based.
* Copies a image from system memory to the screen.
*
* @info: frame buffer structure that represents a single frame buffer
diff --git a/drivers/video/fbdev/sstfb.c b/drivers/video/fbdev/sstfb.c
index 2745557822f7..0c048f9fee68 100644
--- a/drivers/video/fbdev/sstfb.c
+++ b/drivers/video/fbdev/sstfb.c
@@ -15,7 +15,7 @@
* 09/2002 Helge Deller <deller@gmx.de>
* (enable driver on big-endian machines (hppa), ioctl fixes)
* 12/2002 Helge Deller <deller@gmx.de>
- * (port driver to new frambuffer infrastructure)
+ * (port driver to new framebuffer infrastructure)
* 01/2003 Helge Deller <deller@gmx.de>
* (initial work on fb hardware acceleration for voodoo2)
* 08/2006 Alan Cox <alan@redhat.com>
diff --git a/drivers/video/fbdev/tgafb.c b/drivers/video/fbdev/tgafb.c
index dccfc38cfbd5..32296f926196 100644
--- a/drivers/video/fbdev/tgafb.c
+++ b/drivers/video/fbdev/tgafb.c
@@ -884,7 +884,7 @@ tgafb_clut_imageblit(struct fb_info *info, const struct fb_image *image)
/**
* tgafb_imageblit - REQUIRED function. Can use generic routines if
- * non acclerated hardware and packed pixel based.
+ * non accelerated hardware and packed pixel based.
* Copies a image from system memory to the screen.
*
* @info: frame buffer structure that represents a single frame buffer
@@ -921,7 +921,7 @@ tgafb_imageblit(struct fb_info *info, const struct fb_image *image)
/**
* tgafb_fillrect - REQUIRED function. Can use generic routines if
- * non acclerated hardware and packed pixel based.
+ * non accelerated hardware and packed pixel based.
* Draws a rectangle on the screen.
*
* @info: frame buffer structure that represents a single frame buffer
@@ -1047,7 +1047,7 @@ tgafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
/*
* tgafb_copyarea - REQUIRED function. Can use generic routines if
- * non acclerated hardware and packed pixel based.
+ * non accelerated hardware and packed pixel based.
* Copies on area of the screen to another area.
*
* @info: frame buffer structure that represents a single frame buffer
diff --git a/drivers/video/fbdev/tridentfb.c b/drivers/video/fbdev/tridentfb.c
index 9f055ba776c8..6501f6e2615a 100644
--- a/drivers/video/fbdev/tridentfb.c
+++ b/drivers/video/fbdev/tridentfb.c
@@ -58,7 +58,7 @@ static struct fb_fix_screeninfo tridentfb_fix = {
.accel = FB_ACCEL_NONE,
};
-/* defaults which are normally overriden by user values */
+/* defaults which are normally overridden by user values */
/* video mode */
static char *mode_option;
diff --git a/drivers/video/fbdev/via/dvi.c b/drivers/video/fbdev/via/dvi.c
index 27990a73bfa3..47cacdbec830 100644
--- a/drivers/video/fbdev/via/dvi.c
+++ b/drivers/video/fbdev/via/dvi.c
@@ -399,7 +399,7 @@ void viafb_dvi_enable(void)
tmds_register_write(0x88, 0x3b);
else
/*clear CR91[5] to direct on display period
- in the secondary diplay path */
+ in the secondary display path */
via_write_reg_mask(VIACR, 0x91, 0x00, 0x20);
break;
@@ -407,12 +407,12 @@ void viafb_dvi_enable(void)
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
viafb_write_reg_mask(CR93, VIACR, 0x21, BIT0 + BIT5);
- /*fix dvi cann't be enabled with MB VT5718C4 - Al Zhang */
+ /*fix dvi can't be enabled with MB VT5718C4 - Al Zhang */
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)
tmds_register_write(0x88, 0x3b);
else
/*clear CR91[5] to direct on display period
- in the secondary diplay path */
+ in the secondary display path */
via_write_reg_mask(VIACR, 0x91, 0x00, 0x20);
/*fix DVI cannot enable on EPIA-M board */
diff --git a/drivers/video/fbdev/via/hw.c b/drivers/video/fbdev/via/hw.c
index 66afd7be00cc..e9d0fac8fb17 100644
--- a/drivers/video/fbdev/via/hw.c
+++ b/drivers/video/fbdev/via/hw.c
@@ -1542,7 +1542,7 @@ static void init_gfx_chip_info(int chip_type)
else
viaparinfo->chip_info->gfx_chip_revision =
CLE266_REVISION_CX;
- /* restore orignal CR4F value */
+ /* restore original CR4F value */
viafb_write_reg(CR4F, VIACR, tmp);
}
diff --git a/drivers/video/fbdev/via/viafbdev.c b/drivers/video/fbdev/via/viafbdev.c
index dd9374e8ad09..2c67a18d16ad 100644
--- a/drivers/video/fbdev/via/viafbdev.c
+++ b/drivers/video/fbdev/via/viafbdev.c
@@ -190,7 +190,7 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
DEBUG_MSG(KERN_INFO "viafb_check_var!\n");
/* Sanity check */
- /* HW neither support interlacte nor double-scaned mode */
+ /* HW neither support interlacte nor double-scanned mode */
if (var->vmode & FB_VMODE_INTERLACED || var->vmode & FB_VMODE_DOUBLE)
return -EINVAL;
@@ -765,7 +765,7 @@ static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
if (info->flags & FBINFO_HWACCEL_DISABLED || info != viafbinfo)
return -ENODEV;
- /* LCD ouput does not support hw cursors (at least on VN896) */
+ /* LCD output does not support hw cursors (at least on VN896) */
if ((chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2) ||
viafb_LCD_ON)
return -ENODEV;
diff --git a/drivers/video/sticore.c b/drivers/video/sticore.c
index 1d4477f20450..6876a03c464a 100644
--- a/drivers/video/sticore.c
+++ b/drivers/video/sticore.c
@@ -389,7 +389,7 @@ static int sti_font_setup(char *str)
* - sti_font=<number> (<number> = 1,2,3,...)
* most STI ROMs have built-in HP specific fonts, which can be selected
* by giving the desired number to the sticon driver.
- * NOTE: This number is machine and STI ROM dependend.
+ * NOTE: This number is machine and STI ROM dependent.
* - sti_font=<height>x<width> (e.g. sti_font=16x8)
* <height> and <width> gives hints to the height and width of the
* font which the user wants. The sticon driver will try to use
diff --git a/include/video/mmp_disp.h b/include/video/mmp_disp.h
index 41354bd49895..88358527d11b 100644
--- a/include/video/mmp_disp.h
+++ b/include/video/mmp_disp.h
@@ -172,7 +172,7 @@ struct mmp_panel {
/* use node to register to list */
struct list_head node;
const char *name;
- /* path name used to connect to proper path configed */
+ /* path name used to connect to proper path configured */
const char *plat_path_name;
struct device *dev;
int panel_type;
@@ -291,7 +291,7 @@ static inline int mmp_overlay_set_addr(struct mmp_overlay *overlay,
* it defined a common interface that plat driver need to implement
*/
struct mmp_path_info {
- /* driver data, set when registed*/
+ /* driver data, set when registered*/
const char *name;
struct device *dev;
int id;
@@ -309,7 +309,7 @@ extern void mmp_unregister_path(struct mmp_path *path);
extern void mmp_register_panel(struct mmp_panel *panel);
extern void mmp_unregister_panel(struct mmp_panel *panel);
-/* defintions for platform data */
+/* definitions for platform data */
/* interface for buffer driver */
struct mmp_buffer_driver_mach_info {
const char *name;
--
2.48.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-09-04 11:14 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-04 11:13 [PATCH] fbdev: fix typos in comments Hemanth Selam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox