* [PATCH 3/3 v2] OMAP3 Beagle: Enable nand and jffs2 support in defconfig
@ 2008-08-04 15:58 Dirk Behme
2008-08-04 16:27 ` Koen Kooi
0 siblings, 1 reply; 2+ messages in thread
From: Dirk Behme @ 2008-08-04 15:58 UTC (permalink / raw)
To: linux-omap@vger.kernel.org; +Cc: Steve Sakoman
[-- Attachment #1: Type: text/plain, Size: 212 bytes --]
From: Steve Sakoman <steve@sakoman.com>, Dirk Behme <dirk.behme@gmail.com>
Enable nand and jffs2 in defconfig
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
[-- Attachment #2: 3_nand.txt --]
[-- Type: text/plain, Size: 4637 bytes --]
Index: linux-beagle/arch/arm/configs/omap3_beagle_defconfig
===================================================================
--- linux-beagle.orig/arch/arm/configs/omap3_beagle_defconfig
+++ linux-beagle/arch/arm/configs/omap3_beagle_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3-omap1
-# Tue May 27 22:23:14 2008
+# Linux kernel version: 2.6.26-rc8-omap1
+# Fri Jul 4 10:19:23 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -170,9 +170,9 @@ CONFIG_ARCH_OMAP3=y
#
# OMAP Feature Selections
#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_SMARTREFLEX is not set
# CONFIG_OMAP_RESET_CLOCKS is not set
CONFIG_OMAP_BOOT_TAG=y
CONFIG_OMAP_BOOT_REASON=y
@@ -415,7 +415,83 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
@@ -791,6 +867,7 @@ CONFIG_USB_MUSB_LOGLEVEL=0
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -837,6 +914,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -873,6 +951,7 @@ CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
@@ -909,6 +988,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
@@ -1001,6 +1081,17 @@ CONFIG_TMPFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
@@ -1235,6 +1326,8 @@ CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH 3/3 v2] OMAP3 Beagle: Enable nand and jffs2 support in defconfig
2008-08-04 15:58 [PATCH 3/3 v2] OMAP3 Beagle: Enable nand and jffs2 support in defconfig Dirk Behme
@ 2008-08-04 16:27 ` Koen Kooi
0 siblings, 0 replies; 2+ messages in thread
From: Koen Kooi @ 2008-08-04 16:27 UTC (permalink / raw)
To: Dirk Behme; +Cc: linux-omap@vger.kernel.org, Steve Sakoman
[-- Attachment #1: Type: text/plain, Size: 5262 bytes --]
Acked-by: Koen Kooi <koen@openembedded dot org>
Op 4 aug 2008, om 17:58 heeft Dirk Behme het volgende geschreven:
> From: Steve Sakoman <steve@sakoman.com>, Dirk Behme <dirk.behme@gmail.com
> >
>
> Enable nand and jffs2 in defconfig
>
> Signed-off-by: Steve Sakoman <steve@sakoman.com>
> Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
>
>
> Index: linux-beagle/arch/arm/configs/omap3_beagle_defconfig
> ===================================================================
> --- linux-beagle.orig/arch/arm/configs/omap3_beagle_defconfig
> +++ linux-beagle/arch/arm/configs/omap3_beagle_defconfig
> @@ -1,7 +1,7 @@
> #
> # Automatically generated make config: don't edit
> -# Linux kernel version: 2.6.26-rc3-omap1
> -# Tue May 27 22:23:14 2008
> +# Linux kernel version: 2.6.26-rc8-omap1
> +# Fri Jul 4 10:19:23 2008
> #
> CONFIG_ARM=y
> CONFIG_SYS_SUPPORTS_APM_EMULATION=y
> @@ -170,9 +170,9 @@ CONFIG_ARCH_OMAP3=y
> #
> # OMAP Feature Selections
> #
> -CONFIG_OMAP_DEBUG_SRAM_PATCH=y
> # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
> # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
> +# CONFIG_OMAP_SMARTREFLEX is not set
> # CONFIG_OMAP_RESET_CLOCKS is not set
> CONFIG_OMAP_BOOT_TAG=y
> CONFIG_OMAP_BOOT_REASON=y
> @@ -415,7 +415,83 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
> # CONFIG_DEBUG_DEVRES is not set
> # CONFIG_SYS_HYPERVISOR is not set
> # CONFIG_CONNECTOR is not set
> -# CONFIG_MTD is not set
> +CONFIG_MTD=y
> +# CONFIG_MTD_DEBUG is not set
> +# CONFIG_MTD_CONCAT is not set
> +CONFIG_MTD_PARTITIONS=y
> +# CONFIG_MTD_REDBOOT_PARTS is not set
> +# CONFIG_MTD_CMDLINE_PARTS is not set
> +# CONFIG_MTD_AFS_PARTS is not set
> +# CONFIG_MTD_AR7_PARTS is not set
> +
> +#
> +# User Modules And Translation Layers
> +#
> +CONFIG_MTD_CHAR=y
> +CONFIG_MTD_BLKDEVS=y
> +CONFIG_MTD_BLOCK=y
> +# CONFIG_FTL is not set
> +# CONFIG_NFTL is not set
> +# CONFIG_INFTL is not set
> +# CONFIG_RFD_FTL is not set
> +# CONFIG_SSFDC is not set
> +# CONFIG_MTD_OOPS is not set
> +
> +#
> +# RAM/ROM/Flash chip drivers
> +#
> +# CONFIG_MTD_CFI is not set
> +# CONFIG_MTD_JEDECPROBE is not set
> +CONFIG_MTD_MAP_BANK_WIDTH_1=y
> +CONFIG_MTD_MAP_BANK_WIDTH_2=y
> +CONFIG_MTD_MAP_BANK_WIDTH_4=y
> +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> +CONFIG_MTD_CFI_I1=y
> +CONFIG_MTD_CFI_I2=y
> +# CONFIG_MTD_CFI_I4 is not set
> +# CONFIG_MTD_CFI_I8 is not set
> +# CONFIG_MTD_RAM is not set
> +# CONFIG_MTD_ROM is not set
> +# CONFIG_MTD_ABSENT is not set
> +
> +#
> +# Mapping drivers for chip access
> +#
> +# CONFIG_MTD_COMPLEX_MAPPINGS is not set
> +# CONFIG_MTD_PLATRAM is not set
> +
> +#
> +# Self-contained MTD device drivers
> +#
> +# CONFIG_MTD_SLRAM is not set
> +# CONFIG_MTD_PHRAM is not set
> +# CONFIG_MTD_MTDRAM is not set
> +# CONFIG_MTD_BLOCK2MTD is not set
> +
> +#
> +# Disk-On-Chip Device Drivers
> +#
> +# CONFIG_MTD_DOC2000 is not set
> +# CONFIG_MTD_DOC2001 is not set
> +# CONFIG_MTD_DOC2001PLUS is not set
> +CONFIG_MTD_NAND=y
> +# CONFIG_MTD_NAND_VERIFY_WRITE is not set
> +# CONFIG_MTD_NAND_ECC_SMC is not set
> +# CONFIG_MTD_NAND_MUSEUM_IDS is not set
> +CONFIG_MTD_NAND_OMAP2=y
> +CONFIG_MTD_NAND_IDS=y
> +# CONFIG_MTD_NAND_DISKONCHIP is not set
> +# CONFIG_MTD_NAND_NANDSIM is not set
> +# CONFIG_MTD_NAND_PLATFORM is not set
> +# CONFIG_MTD_ALAUDA is not set
> +# CONFIG_MTD_ONENAND is not set
> +
> +#
> +# UBI - Unsorted block images
> +#
> +# CONFIG_MTD_UBI is not set
> # CONFIG_PARPORT is not set
> CONFIG_BLK_DEV=y
> # CONFIG_BLK_DEV_COW_COMMON is not set
> @@ -791,6 +867,7 @@ CONFIG_USB_MUSB_LOGLEVEL=0
> #
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> +# CONFIG_USB_WDM is not set
>
> #
> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> @@ -837,6 +914,7 @@ CONFIG_USB_MON=y
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> # CONFIG_USB_TEST is not set
> +# CONFIG_USB_ISIGHTFW is not set
> CONFIG_USB_GADGET=y
> # CONFIG_USB_GADGET_DEBUG is not set
> # CONFIG_USB_GADGET_DEBUG_FILES is not set
> @@ -873,6 +951,7 @@ CONFIG_MMC=y
> CONFIG_MMC_BLOCK=y
> CONFIG_MMC_BLOCK_BOUNCE=y
> # CONFIG_SDIO_UART is not set
> +# CONFIG_MMC_TEST is not set
>
> #
> # MMC/SD Host Controller Drivers
> @@ -909,6 +988,7 @@ CONFIG_RTC_INTF_DEV=y
> # CONFIG_RTC_DRV_M41T80 is not set
> CONFIG_RTC_DRV_TWL4030=y
> # CONFIG_RTC_DRV_S35390A is not set
> +# CONFIG_RTC_DRV_FM3130 is not set
>
> #
> # SPI RTC drivers
> @@ -1001,6 +1081,17 @@ CONFIG_TMPFS=y
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> +CONFIG_JFFS2_FS=y
> +CONFIG_JFFS2_FS_DEBUG=0
> +CONFIG_JFFS2_FS_WRITEBUFFER=y
> +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
> +# CONFIG_JFFS2_SUMMARY is not set
> +# CONFIG_JFFS2_FS_XATTR is not set
> +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
> +CONFIG_JFFS2_ZLIB=y
> +# CONFIG_JFFS2_LZO is not set
> +CONFIG_JFFS2_RTIME=y
> +# CONFIG_JFFS2_RUBIN is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_MINIX_FS is not set
> @@ -1235,6 +1326,8 @@ CONFIG_CRC_CCITT=y
> CONFIG_CRC32=y
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=y
> +CONFIG_ZLIB_INFLATE=y
> +CONFIG_ZLIB_DEFLATE=y
> CONFIG_PLIST=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 186 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-08-04 16:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-08-04 15:58 [PATCH 3/3 v2] OMAP3 Beagle: Enable nand and jffs2 support in defconfig Dirk Behme
2008-08-04 16:27 ` Koen Kooi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox